(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Aluminum Frame 5 series R shape 40 × 40 × 20 mm

Aluminum Frame 5 series R shape 40 × 40 × 20 mm

Aluminum Frame Series 5, L/R shape 40 x 40x 20mm
Surface treatment is not applied to cut surfaces and additional machining parts.

(i)Caution

  • Additional freight and delivery charge are added to items longer than 2000.1mm

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.

Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image

Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image

Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image

[ ! ]Cut surfaces and altered parts are not surface treated.

■5 Series
Aluminum Extrusions with 6mm Slot Width. Applicable to M5 Screws.

Specifications

Part Number - L
HFSR5-404020 - 800


■Configurable Length Extrusion

Type [ M ]Material [ S ]Surface Treatment Part Number L 0.5mm Increment Mass
kg/m
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize HFSR5-404020 50~4000 1.13 419 5.95x104 5.95x104

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard
Product Services" (P.103) and contact the relevant person in charge at MISUMI.

Alterations

Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-755&756
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends.P2-757
End Tapping 4 Corner HolesLSP/RSP/SPWP2-768
Specify How to CutPrecision CutSCChange total length tolerance. (L±0.5→L±0.2)
[ ! ]Available only for L≦1500
P2-758
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-759&760
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-761&762
CounterboresCounterbores at Specified PositionZ6/XA100Add counterbores at specified position. Use the holes for connecting the frames and a table top.P2-763
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-764
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-765
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-766
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-767
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames.P2-768
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
HFSR5-404020-[50-4000/0.5]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSOverall Length L
(mm)

-

1 Piece(s) 4 Day(s) or more 1050 ~ 4000

Loading...

  1. 1
 

Basic Information

Standard Extrusion Size(mm) 20 Extrusion Series 5 Series Extrusion Type L/R Shape
Extrusion Type_ HFS (Standard) Surface Treatment Clear Anodize Surface Milled Not Provided
Material A6N01SS-T5 Extrusion Size: Width (A)(mm) 40 Extrusion Size: Thickness (T)(mm) 40
L Dimension Fixed, Specified Configurable Extrusion Size: L-Shaped Width(mm) 20 Alterations 20

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)