Aluminum Frame 5 Series Rectangular 20 × 40 mm 4 Side Slots - A6N01SS-T5 Aluminum

Brand :

MISUMI

Caution

Additional freight and delivery charge are added to items longer than 2000.1mm

Product Description

Aluminum Frame 5 Series/ Slot width 6/20x40mm.
Aluminium Profile is a device used to build machine structures, available in various sizes,cross section shapes and with different types of surfaces treatment to choose from.
[Feature]
● Shape : Rectangle.
● Slot width : 6 mm. / width side 1 slot and long side 2 slots
● Cross-section : 20 mm. X 40 mm.
● Overall length :The size is configurable between 50 to 4000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6N01SS-T5 and A6063S-T5
● Surface treatment: Clear/ Black Anodize, Clear Coating
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.

Dimensional Drawing of of Aluminum Frames

HFS (standard type)

*No tolerance regulations for fixed length frames

5 Series

Aluminum Frames, For information regarding dimensional tolerances, please see here .

Groove details
(common to all series)

Groove bottom details
(HFS, CAF, HFSY types)

Enlarged view of part A

■The 5 series has of Aluminum Frames
a groove width of 6±0.30 mm and is suitable for M5 bolts.
[ ! ]No surface treatment is applied to cut surfaces or additionally machined areas.
[ ! ]If an end tap is specified, it will be machined in the red circle.

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Model Aluminum Frames	−	L
HFS5-2040	−	800

type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	HFS5-2040	50 to 4000	0.88	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴
HFS	A6005CSS-T5	Black anodized aluminum	HF SB5-2040	50 to 4000	0.88	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴
HFS	A6005CSS-T5	Clear coating	CAF5-2040	50 to 4000	0.88	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴
HFS	A6005CSS-T5	Baked finish (yellow) *1	HFSY5-2040	50 to 4000	0.88	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴

[ ! ] *1Aluminum Frames, The color of HFSY5 is D22-80V (Japan Paint Manufacturers Association, reference Munsell value 2.5Y8/12).
[ ! ] If you require a length of 6000 mm without anodizing,

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000/1000mm)

[ ! ]Aluminum Frames, Fixed-length frames have a format with K at the beginning of the format code for each frame.

Model Aluminum Frames	−	L
KHFS5-2040	−	1000
KHFSB5-2040	−	4000

type	Material	Surface Treatment	Model	Lmm (no tolerance specified) *2	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	Lmm (no tolerance specified) *2	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	KHF S5-2040	4000	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴
HFS	A6005CSS-T5	White anodized aluminum	KHFS5-2040	1000	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴
HFS	A6005CSS-T5	Black anodized aluminum	KHFSB5-2040	4000	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴
HFS	A6005CSS-T5	Clear coating	KCA F5-2040	4000	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴
HFS	A6005CSS-T5	Baked finish (yellow) *1	KHFSY5-2040	4000	324	1.358× ¹⁰⁴	5.13× ¹⁰⁴

[ ! ] *1Aluminum Frames, The color of KHFSY5 is D22-80V (Japan Paint Manufacturers Association, reference Munsell value 2.5Y8/12).
[ ! ] *2Aluminum Frames, An effective length of 4000 mm means that the frame has an effective length of 4000 mm or more that can actuallybe used.
The actual size including the gripping allowance will be 4000 mm or more (it will be several tens of mm longer).
The fixed length frame is a frame that the customer cuts to their own size, so the exact length cannot bespecified.

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

[ ! ]Aluminum Frames, By using the various alterations listed below, MISUMI's specified length aluminum frames can be assembled withgreater flexibility.
Some frames cannot be applied depending on the type and size. Please check the price list on each alteration pageto see if it is applicable.
Items marked with "-" in the price list cannot be applied.

classification	Additional Work name	Alteration code example	Content
End face tapping	End face tap (center hole)	LTP/RTP/TPW LHP/RHP/HPW	The frame is tapped. 　LTP/RTP/TPW: M5 depth 15mm 　LHP/RHP/HPW: M3 depth 6mm (with helical insert inserted) This processing is required for blind joints ( screw joints / simple joints ).
Change cutting method	High-precision cutting	SC	The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precisioncutting. *Only applicable to L≦1500
Change cutting method	45 degree cut	L□T45 R□T45	The cut is made at a 45-degree angle. 45-degree cuts cannot be specified in the same direction with other alterations. Example: HFS6-3030-500- L TP- LAT45 ⇒ ✖ (alterations in the same direction (left)) HFS6-3030-500- L TP- RAT45 ⇒ 〇 (separate alterations on left and right) [ ! ]If you would like to cut at an angle other than 45 degrees, please contact our catalog non-standard product service .
Wrench Drilling	Fixed position wrench hole	LCH/LCV/LCP RCH/RCV/RCP	Aluminum Frames, This additional processing is required to drill a wrench hole (φ7.35) to match the position of the tap on theend face of the mating frame when fastening a blind joint that assembles frames into an L shape. Blind joints that require this processing ( screw joints / single joints / tapping joints )
	Hole position shifted by the thickness of the frame cap	FL FR	The hole position for the additional fixed position wrench hole is moved by the thickness of the frame cap (3mm). This prevents the frame cap from protruding when assembled at a corner.
	Wrench holes at specified positions	AH/BH/CH/DH/EH AV/BV/CV/DV/EV AP/BP/CP/DP/EP	Aluminum Frames, This is an additional process to drill wrench holes (φ7.35) at any desired position. It can be used whenfastening blind joints at locations other than the frame end. ・ Up to five holes can be drilled in each of the horizontal, vertical, and cross directions. [!] If you require six or more wrench holes, please contact our non-standard product service .
Counterbore Drilling	Specified position counterbored hole	Z5-XA○○ Z6-YA○○	This is an additional process to drill a counterbore hole (selectable from Z5 or Z6) at any position. ・Z5: Through hole φ5.5, counterbore hole φ9.5, Z6: Through hole φ6.5, counterbore hole φ11 . ・Up to five holes can be drilled in one direction. ・For frames with multiple rows of grooves on one surface, counterbore holes will be machined in all grooves. [ ! ]If you require more than six counterbore holes or to change the direction of the counterbore holes, please contact our non-standard product service .
Drilling holes specifically for blind joints	M hole	LMH/LMV RMH/RMV	Drills holes required for connecting post-assembly double joints and center joints. ( Post-assembly double joints / center joints )
Drilling holes specifically for blind joints	L hole	JLP○○-H△ KLP○○-H△	Drill holes required for connecting parallel joints. ( Parallel joints )
Other processing	C-chamfered end	CW	The outer periphery of the frame end face is chamfered.
Other processing	Sticking stickers	ZZZ	A sticker printed with the catalog number etc. is attached to the aluminum frame. There are restrictions on the number of characters etc., but it is also possible to print the customer's serialnumber and unit number.

5 Series Related Parts of Aluminum Frames

■Aluminum Frames accessories

Product name	bracket	Blind Joint	nut	Frame cap	Groove cover
photograph
Product page	Here	Here	Here	Here	Here

■List of compatible frame caps of Aluminum Frames

Frame model number	Compatible frame caps
Frame model number	Product Type		color	Thickness	Model number	Number of uses
HFS5-2040, HFSB5-2040 , HFSF5-2040 , CAF5-2040 fixed length frames (model numbers beginning with K) are also the same.		Cap stopper	black	2.5	HFC5-2040-B	1
		Cap stopper	Light gray	2.5	HFC5-2040-S	1
		Cap stopper (long leg type)	black	2.5	HFCL5-2040-B	1
		Cap stopper (long leg type)	Light gray	2.5	HFCL5-2040-S	1
		bolted	black	2.5	HFCB5-2040-B	1
		bolted	Light gray	2.5	HFCB5-2040-S	1

Selection Support Information of Aluminum Frames

■Frame connection methodsFrame
Aluminum Frames, connection methods can be broadly divided into the following two types.Please check out the various connection method examples .

	bracket	Blind Joint
Connection example
Features	- Connects outside the frame - Can be moved to any position - Not aesthetically pleasing	・Connects inside the frame ・Aesthetically pleasing ・Requires processing of the frame

■Additional tapping of end faces (5 series 20 x 40) of Aluminum Frames
Center section (2 holes) (no corners)

Size and Position	left	Right side	both sides	cross section
M5 depth 15	LTP	RTP	TPW
M3 depth 6 (helisert inserted)	LHP	RHP	HPW
Tap position

■How to think about the allowable guideline load (deflection) for aluminum frames
[!]Aluminum Frames, The allowable guideline load is the load that causes the frame to deflect within 1 mm per 1000 mm of length.
Deflection exceeding this will not cause damage, but it should be considered the maximum practical deflection.(The allowable guideline deflection is proportional to the length. For example, 500 mm = 0.5 mm, 2000 mm = 2 mm.)Please refer to
the aluminum frame strength guideline table or the simplified deflection calculation table/deflection calculation formula for your reference.
Aluminum Frames

Type Overview of Aluminum Frames

		Standard Aluminum Frames			Lightweight Aluminum Frames		High-rigidity Aluminum Frames
		HFS Type	EFS type	NFS (NEFS) type	HFSL type	NFSL type	GFS type	GNFS type

Cross-sectional photo
Material		A6005CSS-T5	A6005CSS-T5	A6063S-T5	A6005CSS-T5	A6063S-T5	A6061SS-T6 equivalent	A6063S-T6 equivalent
Features		Standard cross-sectional shape.	This frame maintains the same rigidity as the HFS series while achieving lighter weight and lower cost.	A significant price reduction has been achieved by changing the material. Strength (*) is the same as the HFSand EFS series.	This frame is designed to be lightweight and inexpensive. It is suitable for situations where lightweight andinexpensiveness are prioritized over strength.	By changing the material from HFSL, we have achieved a further price reduction. Strength (*) is the same asthe HFSL series.	A thick frame that is designed for high rigidity, suitable for enclosures that are subject to highloads.	A significant price reduction has been achieved by changing the material of the load-bearing and rigid frame.Strength (*) is the same as the GFS series.
Surface Treatment		White anodized , black anodized , clear coated , baked finish (yellow)	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum	White anodized aluminum	White anodized aluminum
Compatible Series	5	○	-	○	-	-	-	-
	6		○		○	○	○	○
	8
	8-45

Color Image of Aluminum Frames

	White anodized aluminum	Clear coating (glossy)	Black anodized aluminum	Baked finish (yellow)
End face photo

[ ! ] The color is for illustration purposes only.
[ ! ] There is no anodizing or painting on either end.
[ ! ]Aluminum Frames, The clear coating is a transparent coating applied over white anodizing. The surface has a glossy finish.
[ ! ]There are no color numbers or color standards for black anodizing and white anodizing.

Related Products of Aluminum Frames

Product name of Aluminum Frames	General-purpose area sensor	Ultra-thin area sensor
photograph
Product page	Here	Here
General information page	Details page	Details page