(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)

Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)

- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) from MISUMI.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- You can specify shoulder type flange thickness and flange diameter. It is attached with a male thread.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.

Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded):Related Image

[ ! ]SUS440C or 13Cr stainless has an identification groove on D part.
[ ! ]A machining step remains on the shoulder top for Diamond Shape.
[ ! ]SUS304 may not be polished and may have no centering hole.
 
Material No.[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
Shoulder Thickness ConfigurableShoulder Diameter and Thickness Configurable
RoundDiamondRoundDiamond
(1)SKS3 Equivalent-Treated Hardness: 60~63HRC FPNAT FPNDT FPNATD FPNDTD
(2)SKS3 EquivalentHard Chrome PlatingTreated Hardness: 50~55HRC
Plating Hardness: 750HV~
GFPNATGFPNDTGFPNATDGFPNDTD
(3)SUS304--SFPNATSFPNDTSFPNATDSFPNDTD
(4)SUS304Hard Chrome PlatingPlating Hardness: 750HV~HFPNATHFPNDTHFPNATDHFPNDTD
(5)SUS440C or 13Cr stainless-Treated Hardness: 50~55HRCCFPNATCFPNDTCFPNATDCFPNDTD

Specifications

Part Number-P-L-B-T-H
  
Type Shape D
FPN ATD 12-P9.98-L15-B5.5-T12-H13

■Shoulder Thickness Configurable
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
T
0.5mm Increment
Hm(W)* Tightening
Torque
N • cm
TypeShapeDD Dim.
Tol. g6
 FPN
GFPN
SFP
N
HFPN
CFPN
AT
(Round)
DT
(Diamond)
 3-0.002
-0.008
2.00~4.002~62.0~10.01.0~10.0811.0 98
 4-0.004
-0.012
2.00~5.002~82.0~10.0911.2225
 5-0.004
-0.012
3.00~6.003~102.0~15.0(10.0)1021.5461
 6-0.004
-0.012
4.00~7.003~102.0~15.01121.8784
 8-0.005
-0.014
5.00~9.005~102.0~20.0(15.0)1332.21911
10 -0.005
-0.014
7.00~11.005~153.0~30.0(25.0)15333783
12 -0.006
-0.017
7.00~12.006(10)~153.0~30.0(25.0)1733.26605
16 -0.006
-0.017
13.00~16.008~205.0~30.0214416366
20 -0.007
-0.020
16.00~20.0010~205.0~30.02555.532928
[ ! ]L dimension and B dimension in ( ) are applicable to Diamond Shape.
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2365.) Not applicable when using locking materials or lock washers.

■Shoulder Diameter and Thickness Configurable
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
T
0.1mm Increment
H
0.5mm Increment
m(W)* Tightening
Torque
N • cm
TypeShapeDD Dim.
Tol. g6
 FPN
GFPN
SFP
N
HFPN
CFPN
ATD
(Round)
DTD
(Diamond)
 3-0.002
-0.008
2.00~4.002~62.0~10.01.0~15.06.0~12.011.0 98
 4-0.004
-0.012
2.00~5.002~82.0~10.07.0~13.011.2225
 5-0.004
-0.012
3.00~6.003~102.0~15.0(10.0)8.0~14.021.5461
 6-0.004
-0.012
4.00~7.003~102.0~15.09.0~15.021.8784
 8-0.005
-0.014
5.00~9.005~102.0~20.0(15.0)11.0~17.032.21911
10 -0.005
-0.014
7.00~11.005~153.0~30.0(25.0)13.0~19.0333783
12 -0.006
-0.017
7.00~12.006(10)~153.0~30.0(25.0)13.0~20.033.26605
16 -0.006
-0.017
13.00~16.008~205.0~30.018.0~24.04416366
20 -0.007
-0.020
16.00~20.0010~205.0~30.021.0~27.055.532928
[ ! ]L dimension and B dimension in ( ) are applicable to Diamond Shape.
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2365.) Not applicable when using locking materials or lock washers.

Alterations

Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded):Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CFPNAT3-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNAT4-P[2-5/0.01]-L[2-8/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNAT5-P[3-6/0.01]-L[3-10/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNAT6-P[4-7/0.01]-L[3-10/1]-B[2-12/0.1]-T[1-10/0.5]
CFPNAT8-P[5-9/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5]
CFPNAT10-P[7-11/0.01]-L[5-15/1]-B[3-20/0.1]-T[1-10/0.5]
CFPNAT12-P[7-12/0.01]-L[8-15/1]-B[3-20/0.1]-T[1-10/0.5]
CFPNAT16-P[13-16/0.01]-L[8-20/1]-B[5-20/0.1]-T[1-10/0.5]
CFPNAT20-P[16-20/0.01]-L[10-20/1]-B[5-20/0.1]-T[1-10/0.5]
CFPNATD3-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]-T[1-15/0.1]-H[6-12/0.5]
CFPNATD4-P[2-5/0.01]-L[2-8/1]-B[2-10/0.1]-T[1-15/0.1]-H[7-13/0.5]
CFPNATD5-P[3-6/0.01]-L[3-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[8-14/0.5]
CFPNATD6-P[4-7/0.01]-L[3-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[9-15/0.5]
CFPNATD8-P[5-9/0.01]-L[5-10/1]-B[2-20/0.1]-T[1-15/0.1]-H[11-17/0.5]
CFPNATD10-P[7-11/0.01]-L[5-15/1]-B[3-30/0.1]-T[1-15/0.1]-H[13-19/0.5]
CFPNATD12-P[7-12/0.01]-L[6-15/1]-B[3-30/0.1]-T[1-15/0.1]-H[13-20/0.5]
CFPNATD16-P[13-16/0.01]-L[8-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[18-24/0.5]
CFPNATD20-P[16-20/0.01]-L[10-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[21-27/0.5]
CFPNDT3-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNDT4-P[2-5/0.01]-L[2-8/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNDT5-P[3-6/0.01]-L[3-10/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNDT6-P[4-7/0.01]-L[3-10/1]-B[2-12/0.1]-T[1-10/0.5]
CFPNDT8-P[5-9/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5]
CFPNDT10-P[7-11/0.01]-L[5-15/1]-B[3-20/0.1]-T[1-10/0.5]
CFPNDT12-P[7-12/0.01]-L[8-15/1]-B[3-20/0.1]-T[1-10/0.5]
CFPNDT16-P[13-16/0.01]-L[8-20/1]-B[5-20/0.1]-T[1-10/0.5]
CFPNDT20-P[16-20/0.01]-L[10-20/1]-B[5-20/0.1]-T[1-10/0.5]
CFPNDTD3-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]-T[1-15/0.1]-H[6-12/0.5]
CFPNDTD4-P[2-5/0.01]-L[2-8/1]-B[2-10/0.1]-T[1-15/0.1]-H[7-13/0.5]
CFPNDTD5-P[3-6/0.01]-L[3-10/1]-B[2-10/0.1]-T[1-15/0.1]-H[8-14/0.5]
CFPNDTD6-P[4-7/0.01]-L[3-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[9-15/0.5]
CFPNDTD8-P[5-9/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[11-17/0.5]
CFPNDTD10-P[7-11/0.01]-L[5-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-19/0.5]
CFPNDTD12-P[7-12/0.01]-L[10-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-20/0.5]
CFPNDTD16-P[13-16/0.01]-L[8-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[18-24/0.5]
CFPNDTD20-P[16-20/0.01]-L[10-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[21-27/0.5]
FPNAT3-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]-T[1-10/0.5]
FPNAT4-P[2-5/0.01]-L[2-8/1]-B[2-10/0.1]-T[1-10/0.5]
FPNAT5-P[3-6/0.01]-L[3-10/1]-B[2-10/0.1]-T[1-10/0.5]
FPNAT6-P[4-7/0.01]-L[3-10/1]-B[2-12/0.1]-T[1-10/0.5]
FPNAT8-P[5-9/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5]
FPNAT10-P[7-11/0.01]-L[5-15/1]-B[3-20/0.1]-T[1-10/0.5]
FPNAT12-P[7-12/0.01]-L[8-15/1]-B[3-20/0.1]-T[1-10/0.5]
FPNAT16-P[13-16/0.01]-L[8-20/1]-B[5-20/0.1]-T[1-10/0.5]
FPNAT20-P[16-20/0.01]-L[10-20/1]-B[5-20/0.1]-T[1-10/0.5]
FPNATD3-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]-T[1-15/0.1]-H[6-12/0.5]
FPNATD4-P[2-5/0.01]-L[2-8/1]-B[2-10/0.1]-T[1-15/0.1]-H[7-13/0.5]
FPNATD5-P[3-6/0.01]-L[3-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[8-14/0.5]
FPNATD6-P[4-7/0.01]-L[3-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[9-15/0.5]
FPNATD8-P[5-9/0.01]-L[5-10/1]-B[2-20/0.1]-T[1-15/0.1]-H[11-17/0.5]
FPNATD10-P[7-11/0.01]-L[5-15/1]-B[3-30/0.1]-T[1-15/0.1]-H[13-19/0.5]
FPNATD12-P[7-12/0.01]-L[6-15/1]-B[3-30/0.1]-T[1-15/0.1]-H[13-20/0.5]
FPNATD16-P[13-16/0.01]-L[8-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[18-24/0.5]
FPNATD20-P[16-20/0.01]-L[10-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[21-27/0.5]
FPNDT3-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]-T[1-10/0.5]
FPNDT4-P[2-5/0.01]-L[2-8/1]-B[2-10/0.1]-T[1-10/0.5]
FPNDT5-P[3-6/0.01]-L[3-10/1]-B[2-10/0.1]-T[1-10/0.5]
FPNDT6-P[4-7/0.01]-L[3-10/1]-B[2-12/0.1]-T[1-10/0.5]
FPNDT8-P[5-9/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5]
FPNDT10-P[7-11/0.01]-L[5-15/1]-B[3-20/0.1]-T[1-10/0.5]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Shape Surface Treatment Heat Treatment Material Locating Side Outer Dia. P (Ø)
(mm)
Mounting Side Outer Dia. D
(Ø)
B
(mm)
H L
(mm)
T

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 432 ~ 10-2 ~ 61 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 542 ~ 10-2 ~ 81 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 652 ~ 10-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 762 ~ 12-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 982 ~ 15-5 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 11103 ~ 20-5 ~ 151 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12123 ~ 20-8 ~ 151 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 16165 ~ 20-8 ~ 201 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless16 ~ 20205 ~ 20-10 ~ 201 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 432 ~ 106 ~ 122 ~ 61 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 542 ~ 107 ~ 132 ~ 81 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 652 ~ 158 ~ 143 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 762 ~ 159 ~ 153 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 982 ~ 2011 ~ 175 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 11103 ~ 3013 ~ 195 ~ 151 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12123 ~ 3013 ~ 206 ~ 151 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 16165 ~ 3018 ~ 248 ~ 201 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless16 ~ 20205 ~ 3021 ~ 2710 ~ 201 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 432 ~ 10-2 ~ 61 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 542 ~ 10-2 ~ 81 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 652 ~ 10-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 762 ~ 12-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 982 ~ 15-5 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 11103 ~ 20-5 ~ 151 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12123 ~ 20-8 ~ 151 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 16165 ~ 20-8 ~ 201 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless16 ~ 20205 ~ 20-10 ~ 201 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 432 ~ 106 ~ 122 ~ 61 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 542 ~ 107 ~ 132 ~ 81 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 652 ~ 108 ~ 143 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 762 ~ 159 ~ 153 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 982 ~ 1511 ~ 175 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 11103 ~ 2513 ~ 195 ~ 151 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12123 ~ 2513 ~ 2010 ~ 151 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 16165 ~ 3018 ~ 248 ~ 201 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless16 ~ 20205 ~ 3021 ~ 2710 ~ 201 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent2 ~ 432 ~ 10-2 ~ 61 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent2 ~ 542 ~ 10-2 ~ 81 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent3 ~ 652 ~ 10-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent4 ~ 762 ~ 12-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 982 ~ 15-5 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent7 ~ 11103 ~ 20-5 ~ 151 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent7 ~ 12123 ~ 20-8 ~ 151 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent13 ~ 16165 ~ 20-8 ~ 201 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent16 ~ 20205 ~ 20-10 ~ 201 ~ 10

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent2 ~ 432 ~ 106 ~ 122 ~ 61 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent2 ~ 542 ~ 107 ~ 132 ~ 81 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent3 ~ 652 ~ 158 ~ 143 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent4 ~ 762 ~ 159 ~ 153 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 982 ~ 2011 ~ 175 ~ 101 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent7 ~ 11103 ~ 3013 ~ 195 ~ 151 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent7 ~ 12123 ~ 3013 ~ 206 ~ 151 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent13 ~ 16165 ~ 3018 ~ 248 ~ 201 ~ 15

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent16 ~ 20205 ~ 3021 ~ 2710 ~ 201 ~ 15

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent2 ~ 432 ~ 10-2 ~ 61 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent2 ~ 542 ~ 10-2 ~ 81 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent3 ~ 652 ~ 10-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent4 ~ 762 ~ 12-3 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 982 ~ 15-5 ~ 101 ~ 10

-

1 Piece(s) 3 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent7 ~ 11103 ~ 20-5 ~ 151 ~ 10

Loading...

 

Basic Information

Basic Shape Shouldered Insertion Guide Tip Type Tapered Insertion Guide Specifications Not Provided
Mounting Side Shape Threaded Locating Side O.D. Tolerance 0/-0.01 Mounting Side Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)