Locating Pins - Straight, Sphere (Tapped)

Brand :

MISUMI

Caution

Product Description

- Locating Pins - Straight, Sphere (Tapped) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.

● Tapped

[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided at any position on D part.
[ ! ] When the D dimension is small, a centering hole will cause the sphere section to become small.
[ ! ] On some combination of dimensions, the center hole may not be available.
[ ! ] SUS304 products may not be polished and have no centering hole.

Material No.	[M] Material	[S] Surface Treatment	[H] Hardness	Type
				D Fixed	D Configurable
(1)	SKS3 Equivalent	—	Treated Hardness: 60 to 63 HRC	LPSQTA	FLPSQTA
(2)	SKS3 Equivalent	Hard Chrome Plating	Treated Hardness: 50 to 55 HRC Plating Hardness: HV750 or more	GLPSQTA	FGLPSQTA

(3)	SKS3 Equivalent	—	—	BLPSQTA	FBLPSQTA
(4)	SUS304	—	—	SLPSQTA	FSLPSQTA
(5)	SUS304	Hard Chrome Plating	Plating Hardness: HV750 or more	HLPSQTA	FHLPSQTA
(6)	SUS440C or 13Cr Stainless Steel	—	Treated Hardness: 50 to 55 HRC	CLPSQTA	FCLPSQTA