Shafts - Hollow /One End Tapped Hollow with Wrench Flat
Brand :
MISUMI
Caution
Product Description
"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."
[ ! ]Features of Low Temp. Black Chrome Plating >>P.128
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 10mm from wrench flats machined ends.
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 10mm from wrench flats machined ends.
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
| Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |
| SPJT | SPTR | SUJ2 Equivalent | Effective Hardened Depth of Induction Hardened >>P.112 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~ | - |
| SSPJT | SSPTR | SUS440C or 13Cr stainless | ||
| PSPJT | PSPTR | SUJ2 Equivalent | Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More | |
| RSPJT | RSPTR | SUJ2 Equivalent | Low Temp. Black Chrome Plating | |
More Information
[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> P.111