(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole

Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with one end male screw relief groove, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

One End Threaded with Undercut and Wrench Flats/Cross-Drilled Hole:Related Image

Type[ M ]Material[ H ]Hardness[ S ]
Surface Treatment
With Wrench FlatsWith Cross-Drilled Hole
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. f8
SAFSSFSU-SFHS-SUJ2 EquivalentEffective Hardened Depth of Induction Hardening >> P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~
-
SSAFSSSFSU-SSHFS-SUS440C or 13Cr stainless
PSAFSPSFSU-PSHFS-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSAFSPSSFSU-PSSHFS-SUS440C or 13Cr stainless
RSAFS--RSHFS-SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSAGS-PSHGSS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSAGS--SUS304

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number-L-F-M-SC-H
SAFS13-800-F23-M10    
SSHFS20-450-F28-M12  -H15

Part Number1mm IncrementsSelectionWrench Flats DimensionsD Tol.(Y)Max.C
TypeDLFM (Coarse)SCW1g6h5f8

(With Wrench Flats)
(D Tol. g6)
SAFS
SSAFS

PSAFS
PS
SAFS

(D Tol. f8)
PSAGS
PSSAGS
(D Tol. h5)
SFSU
SSFSU
PSFSU
PSSFSU
825~ 9955≤F≤Mx3
















[ ! ]F-(g)≥Pitchx3
6       SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0

[ ! ]Details of Wrench Flats >> P.142
78-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.5 or Less
1025~ 99568      88-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.5 or Less
1225~11956810     1010-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1325~1195681012    1110-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1525~1195681012    1310-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1625~1195681012    1410-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.5 or Less
1825~119568101216   1610-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.5 or Less
2025~119568101216   1710-0.007
-0.020
0
-0.009
-0.020
-0.053
12001.0 or Less
2525~1195 81012162024 2210-0.007
-0.020
0
-0.009
-0.020
-0.053
12001.0 or Less
3025~1495 81012162024 2715-0.007
-0.020
0
-0.009
-0.020
-0.053
15001.0 or Less
3525~1495  1012162024303015-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less
4025~1495   12162024303620-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less
5025~1495    162024304120-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less

Part Number1mm IncrementSelectionWrench Flats DimensionsD Tol.(Y)Max.C
TypeDLFM (Coarse)SCW1g6
(With Wrench Flats)
(D Tol. g6)
Low Temp. Black Chrome Plating
RSAFS
825~5005≤F≤Mx3












[ ! ]F-(g)≥Pitchx3
6      SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]Details of Wrench Flats >> P.142
78-0.005
-0.014
8000.5 or Less
1025~50068     88-0.005
-0.014
8000.5 or Less
1225~5006810    1010-0.006
-0.017
10000.5 or Less
1325~500681012   1110-0.006
-0.017
10000.5 or Less
1525~500681012   1310-0.006
-0.017
10000.5 or Less
1625~500681012   1410-0.006
-0.017
12000.5 or Less
1825~50068101216  1610-0.006
-0.017
12000.5 or Less
2025~50068101216  1710-0.007
-0.020
12001.0 or Less
2525~500 810121620242210-0.007
-0.020
12001.0 or Less
3025~500 810121620242715-0.007
-0.020
15001.0 or Less

Part Number1mm IncrementSelectionCross-Drilled Hole DimensionsD Tol.(Y)Max.C
TypeDLFM (Coarse)Hdg6f8
(With Cross-Drilled Hole)
(D Tol. g6)
SFHS
SSHFS
PSHFS
PSSHFS

RSHFS
(D Tol. f8)
PSHGS

[ ! ]D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.
825~5005≤F≤Mx3












[ ! ]F-(g)≥Pitchx3
6      H=1mm Increment
[ ! ]L≥H+d/2+2
[ ! ]H≥d/2+2
3-0.005
-0.014
-0.013
-0.035
8000.5 or Less
1025~50068     3-0.005
-0.014
-0.013
-0.035
8000.5 or Less
1225~5006810    3-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1325~500681012   4-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1525~500681012   4-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1625~500681012   4-0.006
-0.017
-0.016
-0.043
12000.5 or Less
1825~50068101216  6-0.006
-0.017
-0.016
-0.043
12000.5 or Less
2025~50068101216  6-0.007
-0.020
-0.020
-0.053
12001.0 or Less
2525~500 810121620247-0.007
-0.020
-0.020
-0.053
12001.0 or Less
3025~500 810121620247-0.007
-0.020
-0.020
-0.053
15001.0 or Less

Alterations

One End Threaded with Undercut and Wrench Flats/Cross-Drilled Hole:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSAFS8-[25-795/1]-F[5-18/1]-M6-SC[0-787/1]
PSAFS8-[25-795/1]-F[5-18/1]-MMC6-SC[0-787/1]
PSAFS10-[25-795/1]-F[5-24/1]-M[6,​8]-SC[0-787/1]
PSAFS10-[25-795/1]-F[5-24/1]-MMC[6,​8]-SC[0-787/1]
PSAFS12-[25-995/1]-F[5-30/1]-M[6,​8,​10]-SC[0-985/1]
PSAFS12-[25-995/1]-F[5-30/1]-MMC[6,​8,​10]-SC[0-985/1]
PSAFS12-[25-995/1]-F[5-30/1]-MMS10-SC[0-985/1]
PSAFS13-[25-995/1]-F[5-36/1]-M[6,​8,​10,​12]-SC[0-985/1]
PSAFS13-[25-995/1]-F[5-36/1]-MMC[6,​8,​10]-SC[0-985/1]
PSAFS13-[25-995/1]-F[5-36/1]-MMS10-SC[0-985/1]
PSAFS15-[25-1195/1]-F[5-36/1]-M[6,​8,​10,​12]-SC[0-985/1]
PSAFS15-[25-1195/1]-F[5-36/1]-MMC[6,​8,​10,​12]-SC[0-985/1]
PSAFS15-[25-1195/1]-F[5-36/1]-MMS[10,​12]-SC[0-985/1]
PSAFS16-[25-1195/1]-F[5-36/1]-M[6,​8,​10,​12]-SC[0-1185/1]
PSAFS16-[25-1195/1]-F[5-36/1]-MMC[6,​8,​10,​12]-SC[0-1185/1]
PSAFS16-[25-1195/1]-F[5-36/1]-MMS[10,​12]-SC[0-1185/1]
PSAFS18-[25-1195/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-SC[0-1185/1]
PSAFS18-[25-1195/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15]-SC[0-1185/1]
PSAFS18-[25-1195/1]-F[5-48/1]-MMS[10,​12,​14]-SC[0-1185/1]
PSAFS20-[25-1195/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-SC[0-1185/1]
PSAFS20-[25-1195/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-SC[0-1185/1]
PSAFS20-[25-1195/1]-F[5-48/1]-MMS[10,​12,​14,​18]-SC[0-1185/1]
PSAFS25-[25-1195/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-SC[0-1185/1]
PSAFS25-[25-1195/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20]-SC[0-1185/1]
PSAFS25-[25-1195/1]-F[5-72/1]-MMS[10,​12,​14,​18]-SC[0-1185/1]
PSAFS30-[25-1495/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-SC[0-1480/1]
PSAFS30-[25-1495/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20,​25]-SC[0-1480/1]
PSAFS30-[25-1495/1]-F[5-72/1]-MMS[10,​12,​14,​18]-SC[0-1480/1]
PSAFS35-[25-1495/1]-F[5-90/1]-M[10,​12,​16,​20,​24,​30]-SC[0-1480/1]
PSAFS35-[25-1495/1]-F[5-90/1]-MMC[10,​12,​15,​17,​20,​25,​30]-SC[0-1480/1]
PSAFS35-[25-1495/1]-F[5-90/1]-MMS[10,​12,​14,​18]-SC[0-1480/1]
PSAFS40-[25-1495/1]-F[5-90/1]-M[12,​16,​20,​24,​30]-SC[0-1475/1]
PSAFS40-[25-1495/1]-F[5-90/1]-MMC[12,​15,​17,​20,​25,​30]-SC[0-1475/1]
PSAFS40-[25-1495/1]-F[5-90/1]-MMS[12,​14,​18]-SC[0-1475/1]
PSAFS50-[25-1495/1]-F[5-90/1]-M[16,​20,​24,​30]-SC[0-1475/1]
PSAFS50-[25-1495/1]-F[5-90/1]-MMC[15,​17,​20,​25,​30]-SC[0-1475/1]
PSAFS50-[25-1495/1]-F[5-90/1]-MMS[14,​18]-SC[0-1475/1]
PSAGS8-[25-795/1]-F[5-18/1]-M6-SC[0-787/1]
PSAGS8-[25-795/1]-F[5-18/1]-MMC6-SC[0-787/1]
PSAGS10-[25-795/1]-F[5-24/1]-M[6,​8]-SC[0-787/1]
PSAGS10-[25-795/1]-F[5-24/1]-MMC[6,​8]-SC[0-787/1]
PSAGS12-[25-995/1]-F[5-30/1]-M[6,​8,​10]-SC[0-985/1]
PSAGS12-[25-995/1]-F[5-30/1]-MMC[6,​8,​10]-SC[0-985/1]
PSAGS12-[25-995/1]-F[5-30/1]-MMS10-SC[0-985/1]
PSAGS13-[25-995/1]-F[5-36/1]-M[6,​8,​10,​12]-SC[0-985/1]
PSAGS13-[25-995/1]-F[5-36/1]-MMC[6,​8,​10]-SC[0-985/1]
PSAGS13-[25-995/1]-F[5-36/1]-MMS10-SC[0-985/1]
PSAGS15-[25-995/1]-F[5-36/1]-M[6,​8,​10,​12]-SC[0-985/1]
PSAGS15-[25-995/1]-F[5-36/1]-MMC[6,​8,​10,​12]-SC[0-985/1]
PSAGS15-[25-995/1]-F[5-36/1]-MMS[10,​12]-SC[0-985/1]
PSAGS16-[25-1195/1]-F[5-36/1]-M[6,​8,​10,​12]-SC[0-1185/1]
PSAGS16-[25-1195/1]-F[5-36/1]-MMC[6,​8,​10,​12]-SC[0-1185/1]
PSAGS16-[25-1195/1]-F[5-36/1]-MMS[10,​12]-SC[0-1185/1]
PSAGS18-[25-1195/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-SC[0-1185/1]
PSAGS18-[25-1195/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15]-SC[0-1185/1]
PSAGS18-[25-1195/1]-F[5-48/1]-MMS[10,​12,​14]-SC[0-1185/1]
PSAGS20-[25-1195/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-SC[0-1185/1]
PSAGS20-[25-1195/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-SC[0-1185/1]
PSAGS20-[25-1195/1]-F[5-48/1]-MMS[10,​12,​14,​18]-SC[0-1185/1]
PSAGS25-[25-1195/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-SC[0-1185/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC]
(mm)
Change Thread M to Fine One [MMC]
(mm)
Change Thread M to Fine One [MMS]
(mm)
F
(mm)
H
(mm)
Threaded (Coarse) [M]
(mm)

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 795g6Induction Hardened (58HRC~)0 ~ 787--5 ~ 18-6

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 795g6Induction Hardened (58HRC~)0 ~ 7876-5 ~ 18--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 795g6Induction Hardened (58HRC~)0 ~ 787--5 ~ 24-6 ~ 8

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 795g6Induction Hardened (58HRC~)0 ~ 7876 ~ 8-5 ~ 24--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 995g6Induction Hardened (58HRC~)0 ~ 985--5 ~ 30-6 ~ 10

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 995g6Induction Hardened (58HRC~)0 ~ 9856 ~ 10-5 ~ 30--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 995g6Induction Hardened (58HRC~)0 ~ 985-105 ~ 30--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 995g6Induction Hardened (58HRC~)0 ~ 985--5 ~ 36-6 ~ 12

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 995g6Induction Hardened (58HRC~)0 ~ 9856 ~ 10-5 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 995g6Induction Hardened (58HRC~)0 ~ 985-105 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 1195g6Induction Hardened (58HRC~)0 ~ 985--5 ~ 36-6 ~ 12

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 1195g6Induction Hardened (58HRC~)0 ~ 9856 ~ 12-5 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 1195g6Induction Hardened (58HRC~)0 ~ 985-10 ~ 125 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185--5 ~ 36-6 ~ 12

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1195g6Induction Hardened (58HRC~)0 ~ 11856 ~ 12-5 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185-10 ~ 125 ~ 36--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185--5 ~ 48-6 ~ 16

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1195g6Induction Hardened (58HRC~)0 ~ 11856 ~ 15-5 ~ 48--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185-10 ~ 145 ~ 48--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185--5 ~ 48-6 ~ 16

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1195g6Induction Hardened (58HRC~)0 ~ 11856 ~ 17-5 ~ 48--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185-10 ~ 185 ~ 48--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185--5 ~ 72-8 ~ 24

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1195g6Induction Hardened (58HRC~)0 ~ 11858 ~ 20-5 ~ 72--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1195g6Induction Hardened (58HRC~)0 ~ 1185-10 ~ 185 ~ 72--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1480--5 ~ 72-8 ~ 24

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 14808 ~ 25-5 ~ 72--

-

1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1480-10 ~ 185 ~ 72--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1480--5 ~ 90-10 ~ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1495g6Induction Hardened (58HRC~)0 ~ 148010 ~ 30-5 ~ 90--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1480-10 ~ 185 ~ 90--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1475--5 ~ 90-12 ~ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 147512 ~ 30-5 ~ 90--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1475-12 ~ 185 ~ 90--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1475--5 ~ 90-16 ~ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 147515 ~ 30-5 ~ 90--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1495g6Induction Hardened (58HRC~)0 ~ 1475-14 ~ 185 ~ 90--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 795f8No Induction Hardening0 ~ 787--5 ~ 18-6

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 795f8No Induction Hardening0 ~ 7876-5 ~ 18--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 795f8No Induction Hardening0 ~ 787--5 ~ 24-6 ~ 8

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 795f8No Induction Hardening0 ~ 7876 ~ 8-5 ~ 24--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 995f8No Induction Hardening0 ~ 985--5 ~ 30-6 ~ 10

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 995f8No Induction Hardening0 ~ 9856 ~ 10-5 ~ 30--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 995f8No Induction Hardening0 ~ 985-105 ~ 30--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 995f8No Induction Hardening0 ~ 985--5 ~ 36-6 ~ 12

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 995f8No Induction Hardening0 ~ 9856 ~ 10-5 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 995f8No Induction Hardening0 ~ 985-105 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 995f8No Induction Hardening0 ~ 985--5 ~ 36-6 ~ 12

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 995f8No Induction Hardening0 ~ 9856 ~ 12-5 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 995f8No Induction Hardening0 ~ 985-10 ~ 125 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1195f8No Induction Hardening0 ~ 1185--5 ~ 36-6 ~ 12

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1195f8No Induction Hardening0 ~ 11856 ~ 12-5 ~ 36--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1195f8No Induction Hardening0 ~ 1185-10 ~ 125 ~ 36--

-

1 Piece(s) 6 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1195f8No Induction Hardening0 ~ 1185--5 ~ 48-6 ~ 16

-

1 Piece(s) 6 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1195f8No Induction Hardening0 ~ 11856 ~ 15-5 ~ 48--

-

1 Piece(s) 6 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1195f8No Induction Hardening0 ~ 1185-10 ~ 145 ~ 48--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1195f8No Induction Hardening0 ~ 1185--5 ~ 48-6 ~ 16

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1195f8No Induction Hardening0 ~ 11856 ~ 17-5 ~ 48--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1195f8No Induction Hardening0 ~ 1185-10 ~ 185 ~ 48--

-

1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2525 ~ 1195f8No Induction Hardening0 ~ 1185--5 ~ 72-8 ~ 24

Loading...

 

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) No Machining
Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)