Round Wire Coil Springs/Deflection 45%/I.D. Referenced

Brand :
MISUMI
Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
This is a standardized series so that the spring constant is constant for the same diameter.
Drawing

VUY
VUR
VUF
VUL
VUT
VUM
VUH
VUF
VUL
VUT
Closed Ends (Both Ends Not Ground*)
Closed Ends (Both Ends Ground)
Tolerance Table
Dimensions | Tolerance (mm) | |
Inner Diameter (D) | ⌀8 or less | +0.6 +0.1 |
⌀10 or more | +0.8 +0.1 | |
Length (L) | 50 or less | +/- 1 |
55 or more | +/- 2 | |
[ ! ]All VUY and VUR are Both Ends Not Ground, and all VUM and VUH are Both Ends Ground.
[ ! ]For VUF, VUL, and VUT, some specifications are without both ends grinding, while the others are with both ends grinding. Please refer to the table on the right.
[ ! ]For VUF, VUL, and VUT, some specifications are without both ends grinding, while the others are with both ends grinding. Please refer to the table on the right.
Both Ends Grinding Table
Type | D | L |
VUF | 3 | 10 to 30 |
4 | ||
5 | 10 to 15 | |
6 | 10 |
Type | D | L |
VUL | 3 | 10-20 |
4 | 10 to 15 |
Type | D | L |
VUT | 3 | 10-20 |
4 | 10 |
Product Specification
[ M ]Material: SUS304-WPB, Spring Constant: +/- 10%
[ ! ]Operating temperature: -10 to 100℃
[ ! ]Reference number of cycles: approximately 1,000,000 times (number of extension and compression cycles)
*The above number of times is a reference value only. The usage count varies depending on the direction of tension, operating temperature, environment, and deflection.
It is recommended to use the springs within the range of the allowable deflection amount F max. (mm) if you want to increase the usage count.
[ ! ]Stainless steel springs may become magnetic due to processing.
[ ! ]The solid length values are reference values only. There may be slight variations depending on the lot. Using it compressed to the solid length may cause deformation or break after a few usage counts.
Be sure to use it within the allowable deflection F max. (mm) or less.
How to calculate the number of coils (reference value)
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
*The number of coils is a reference value. There may be slight variations depending on the lot.
[ ! ]Operating temperature: -10 to 100℃
[ ! ]Reference number of cycles: approximately 1,000,000 times (number of extension and compression cycles)
*The above number of times is a reference value only. The usage count varies depending on the direction of tension, operating temperature, environment, and deflection.
It is recommended to use the springs within the range of the allowable deflection amount F max. (mm) if you want to increase the usage count.
[ ! ]Stainless steel springs may become magnetic due to processing.
[ ! ]The solid length values are reference values only. There may be slight variations depending on the lot. Using it compressed to the solid length may cause deformation or break after a few usage counts.
Be sure to use it within the allowable deflection F max. (mm) or less.
How to calculate the number of coils (reference value)
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
*The number of coils is a reference value. There may be slight variations depending on the lot.
Model number display
| Type | — | L |
| VUR10 VUM10 | — — | 40 40 |
Specifications Table
■ VUY: Fmax. (allowable deflection amount) = L × Fa%, Spring Constant *Refer to the spring constant table
| Type | Inner diameter D | Length L | Outer diameter D1 (reference value) | Wire diameter d | F Max. | N{kgf} Max. | Reference | Fa % | |||||
| Pitch | Solid Length | Total number of coils | |||||||||||
| VUY | 3 | 10 | 3.81 | 0.23 | 7.5 | 0.74 {0.08} | 1.6 | 2 | 7.5 | 75 | |||
| 15 | 3.87 | 0.26 | 11.25 | 1.10 {0.11} | 1.6 | 3 | 10.5 | ||||||
| 20 | 3.93 | 0.29 | 15 | 1.47 {0.15} | 1.4 | 4.7 | 15 | ||||||
| 25 | 3.95 | 0.3 | 18.75 | 1.84 {0.19} | 1.6 | 5.4 | 17 | ||||||
| 30 | 3.99 | 0.32 | 22.5 | 2.21 {0.23} | 1.5 | 7 | 20.75 | ||||||
| VUY | 4 | 10 | 4.87 | 0.26 | 7.5 | 0.74 {0.08} | 2.1 | 1.9 | 6.25 | 75 | |||
| 15 | 4.95 | 0.3 | 11.25 | 1.10 {0.11} | 1.9 | 3.1 | 9.25 | ||||||
| 20 | 4.99 | 0.32 | 15 | 1.47 {0.15} | 1.9 | 4.1 | 11.75 | ||||||
| 25 | 5.05 | 0.35 | 18.75 | 1.84 {0.19} | 1.8 | 5.6 | 15 | ||||||
| 30 | 5.05 | 0.35 | 22.5 | 2.21 {0.23} | 2.2 | 5.6 | 15 | ||||||
| VUY | 5 | 10 | 5.95 | 0.3 | 7.5 | 0.74 {0.08} | 2.2 | 2.1 | 6 | 75 | |||
| 15 | 5.99 | 0.32 | 11.25 | 1.10 {0.11} | 2.7 | 2.7 | 7.25 | ||||||
| 20 | 6.05 | 0.35 | 15 | 1.47 {0.15} | 2.6 | 3.6 | 9.25 | ||||||
| 25 | 6.15 | 0.4 | 18.75 | 1.84 {0.19} | 2.1 | 5.8 | 13.5 | ||||||
| 30 | 6.15 | 0.4 | 22.5 | 2.21 {0.23} | 2.5 | 5.8 | 13.5 | ||||||
| 35 | 6.15 | 0.4 | 26.25 | 2.57 {0.26} | 2.9 | 5.8 | 13.5 | ||||||
| 40 | 6.25 | 0.45 | 30 | 2.94 {0.30} | 2.1 | 9.5 | 20 | ||||||
| 45 | 6.25 | 0.45 | 33.75 | 3.31 {0.34} | 2.4 | 9.5 | 20 | ||||||
| 50 | 6.25 | 0.45 | 37.5 | 3.68 {0.38} | 2.7 | 9.5 | 20 | ||||||
| VUY | 6 | 10 | 6.95 | 0.32 | 7.5 | 0.74 {0.08} | 2.8 | 2 | 5.25 | 75 | |||
| 15 | 7.15 | 0.4 | 9.75 | 0.96 {0.10} | 1.8 | 4.2 | 9.5 | 65 | |||||
| 20 | 7.15 | 0.4 | 13 | 1.27 (0.13) | 2.5 | 4.2 | 9.5 | ||||||
| 25 | 7.15 | 0.4 | 18.75 | 1.84 {0.19} | 3.2 | 4.2 | 9.5 | 75 | |||||
| 30 | 7.25 | 0.45 | 22.5 | 2.21 {0.23} | 2.4 | 6.7 | 13.75 | ||||||
| 35 | 7.25 | 0.45 | 26.25 | 2.57 {0.26} | 2.9 | 6.7 | 13.75 | ||||||
| 40 | 7.25 | 0.45 | 30 | 2.94 {0.30} | 3.3 | 6.7 | 13.75 | ||||||
| 45 | 7.35 | 0.5 | 33.75 | 3.31 {0.34} | 2.5 | 10.4 | 19.75 | ||||||
| 50 | 7.35 | 0.5 | 37.5 | 3.68 {0.38} | 2.7 | 10.4 | 19.75 | ||||||
| 55 | 7.35 | 0.5 | 41.25 | 4.04 (0.41) | 3 | 10.4 | 19.75 | ||||||
| 60 | 7.35 | 0.5 | 45 | 4.41 (0.45) | 3.3 | 10.4 | 19.75 | ||||||
| VUY | 8 | 20 | 9.45 | 0.55 | 15 | 2.94 {0.30} | 3.2 | 4.9 | 7.75 | 75 | |||
| 25 | 9.45 | 0.55 | 18.75 | 3.68 {0.38} | 4.1 | 4.9 | 7.75 | ||||||
| 30 | 9.55 | 0.6 | 22.5 | 4.41 (0.45) | 3.4 | 6.8 | 10.25 | ||||||
| 35 | 9.55 | 0.6 | 26.25 | 5.15 (0.53) | 4 | 6.8 | 10.25 | ||||||
| 40 | 9.65 | 0.65 | 30 | 5.88 (0.60) | 3.5 | 9.1 | 13 | ||||||
| 45 | 9.65 | 0.65 | 33.75 | 6.62 (0.68) | 3.9 | 9.1 | 13 | ||||||
| 50 | 9.65 | 0.65 | 37.5 | 7.35 (0.75) | 4.4 | 9.1 | 13 | ||||||
| 55 | 9.75 | 0.7 | 41.25 | 8.09 (0.83) | 3.6 | 12.5 | 16.75 | ||||||
| 60 | 9.75 | 0.7 | 45 | 8.82 (0.90) | 3.9 | 12.5 | 16.75 | ||||||
| 65 | 9.75 | 0.7 | 48.75 | 9.56 (0.98) | 4.3 | 12.5 | 16.75 | ||||||
| 70 | 9.85 | 0.75 | 52.5 | 10.29 {1.05} | 3.5 | 16.7 | 21.25 | ||||||
| 80 | 9.85 | 0.75 | 56 | 10.98 {1.12} | 4 | 16.7 | 21.25 | 70 | |||||
| VUY | 10 | 20 | 11.75 | 0.65 | 13 | 2.55 {0.26} | 3.1 | 5.7 | 7.75 | 65 | |||
| 25 | 11.75 | 0.65 | 16.25 | 3.19 {0.33} | 4 | 5.7 | 7.75 | ||||||
| 30 | 11.75 | 0.65 | 22.5 | ||||||||||