Locating Pins - Large Head, Tapered (Press Fit)

Brand :

MISUMI

Caution

The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change
Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

- Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
- Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The insertion guide is applicable to tolerance p6 only.

Dimensional Drawing

(Round)

(Diamond)

Locating Pin - Large Head, Tapered, Press Fit: Related Image

* The insertion guide is applicable to tolerance p6 only.
[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided on D part, unless the L dimension is short.
[ ! ] SUS304 products may not be polished and have no centering hole.

When D < 3
a = 0.5
d = D - 0.1
[ ! ] Relief dimensions are reference values.

When D ≥ 3
a = 1.0
d = D - 0.2

Product Specifications

Part Number Display Method

Part Number			—	P	—	L	—	B

Type	D Tol. Config.	D
JP	BB	6	—	10	—		—
JP	BD	8	—	11.98
FP	BA	10	—	P12.02	—	L10	—	B3.2
FP	BD	12	—	P13.97	—	L12	—	B5

Specification Table

■P Fixed Type

Part Number					P Selection														L	B	C	m	ℓ	(W)
Type	D Tolerance, Shape	D	D Dimension Tolerance
Type	D Tolerance, Shape	D	m6	p6
JP GJP BJP SJP HJP CJP	[Round] BB(m6) BPB(p6) [Diamond] DB(m6) DPB (p6) [ ! ] Applicable when D ≥ 2	1	+0.008 +0.002	+0.012 +0.006	2														3	3	0.1	0.5	0	—
		2				3	4												4	3	0.5	1	0	1.2
		3					4	5	6										5	5	0.5	2	1	1.5
		4	+0.012 +0.004	+0.020 +0.012				5	6										5	6	1	3		1.8
		5							6	8									10	6				2.2
		6								8	10								10	8				3
		8	+0.015 +0.006	+0.024 +0.015							10	12	13						15	8	1.5	4		3.5
		10	+0.015 +0.006	+0.024 +0.015								12	13	15						10	2			4
		12	+0.018 +0.007	+0.029 +0.018									13	15	16									5
		13												15	16				22				2	5.5
		16														20	25		22		3	5		7
		20	+0.021 +0.008	+0.035 +0.022													25	30	30	15	3	5		9

■P Configurable

Part Number					P 0.01 mm Increments	L	B	C	m	ℓ	(W)
Type	D Tolerance, Shape	D	D Dimension Tolerance
			m6	p6
JP GJP BJP SJP HJP CJP	[Round] BA (m6) BPA (p6) [Diamond] BD (m6) BPD (p6) [ ! ] Applicable when D ≥ 2	1	+0.008 +0.002	+0.012 +0.006	1.20 to 2.50	3	3	0.1	0.5	0	—
		2			2.50 to 4.00	4		0.5	1		1.2
		3			3.50 to 6.00	5	5		2	1	1.5
		4	+0.012 +0.004	+0.02 +0.012	4.50 to 7.00		6	1	3		1.8
		5			5.50 to 8.00	10					2.2
		6			6.50 to 10.00		8				3
		8	+0.015 +0.006	+0.024 +0.015	9.00 to 13.00	15		1.5	4		3.5
		10			11.00 to 15.00		10	2			4
		12	+0.018 +0.007	+0.029 +0.018	13.00 to 16.00						5
		13			14.00 to 18.00	22				2	5.5
		16			17.00 to 25.00			3	5		7
		20	+0.021 +0.008	+0.035 +0.022	22.00 to 30.00	30	15				9

■P, L, B Configurable

Part Number

P
0.01 mm Increments

L
1 mm Increments

B
0.1 mm Increments

ℓ

(W)

Type

D Tolerance, Shape

D Dimension Tolerance

FP
GFP
BFP
SFP
HFP
CFP

[Round]
BA(m6)
BPA(p6)
BG (g6)

[Diamond]
BD(m6)
BPD(p6)
DG (g6)

+0.008
+0.002

+0.012
+0.006

－0.002
－0.008

1.20 (1.50)Up to 3.00 (2.50)

2·3

1.0 to 5.0

0.1

0.5

0.6

2.50 to 6.00 (4.00)

2 to 6

1.0 to 15.0 (10.0)

0.5

1.2

3.50 to 8.00

3 to 10

1.0 to 15.0 (10.0)

1.5

+0.012
+0.004

+0.020
+0.012

－0.004
－0.012

4.50 to 8.00

3 (4)Up to 14

1.0 to 15.0 (10.0)

1.8

5.50 to 10.00

5 to 15

1.0 to 15.0 (10.0)

2.2

6.50 to 10.00

5 to 15

1.0 to 30.0 (25.0)

+0.015
+0.006

+0.024
+0.015

－0.005
－0.014

8.50 to 15.00

5 (6)Up to 16

1.0 to 30.0 (25.0)

1.5

3.5

11.00 to 17.00

5 (10)Up to 20

3.0 to 30.0 (25.0)

+0.018
+0.007

+0.029
+0.018

－0.006
－0.017

13.00 to 18.00

6 (10)Up to 24

3.0 to 30.0 (25.0)

14.00 to 20.00

7 (12)Up to 26

5.0 to 30.0 (25.0)

5.5

17.00 to 27.00

8 (15)Up to 32

5.0 to 30.0

+0.021
+0.008

+0.035
+0.022

－0.007
－0.020

22.00 to 30.00

10 (15)Up to 40

5.0 to 30.0

[ ! ] P, L, B dimensions in ( ) are applicable to Diamond Shape

			Mass (g) Ref. Value
Config.	D	P	SKS3 Equivalent	SUS304 Equivalent	SUS440C or 13Cr Stainless Steel
Round	1	2	0.09	0.09	0.09
	2	3	0.27	0.27	0.27
	2	4	0.39	0.40	0.40
	3	4	0.77	0.79	0.78
		5	1.05	1.07	1.06
		6	1.39	1.41	1.40
	4	5	1.42	1.44	1.43
	4	6	1.83	1.86	1.84
	5	6	2.88	2.93	2.90
	5	8	3.91	3.98	3.95
	6	8	5.38	5.48	5.43
	6	10	7.16	7.28	7.22
	8	10	10.86	11.05	10.96
		12	13.03	13.26	13.15
		13	14.27	14.52	14.39
	10	12	18.14	18.46	18.30
		13	19.68	20.03	19.86
		15	23.14	23.55	23.34
	12	13	23.75	24.18	23.97
		15	27.21	27.69	27.45
		16	29.12	29.64	29.38
	13	15	36.82	37.48	37.15
	13	16	38.74	39.43	39.08
	16	20	59.43	60.49	59.96
	16	25	73.31	74.62	73.97
	20	25	131.89	134.24	133.06
	20	30	157.34	160.14	158.74
Diamond	2	3	0.18	0.18	0.18
	2	4	0.28	0.29	0.28
	3	4	0.54	0.55	0.54
		5	0.75	0.77	0.76
		6	1.03	1.05	1.04
	4	5	0.99	1.01	1.00
	4	6	1.32	1.34	1.33
	5	6	2.25	2.29	2.27
	5	8	3.08	3.14	3.11
	6	8	3.87	3.94	3.91
	6	10	5.27	5.36	5.32
	8	10	8.66	8.81	8.74
		12	10.39	10.58	10.48
		13	11.40	11.61	11.51
	10	12	14.37	14.62	14.50
		13	15.60	15.87	15.73
		15	18.42	18.75	18.59
	12	13	18.65	18.98	18.81
		15	21.32	21.69	21.50
		16	22.83	23.24	23.04
	13	15	30.34	30.88	30.61
	13	16	31.82	32.39	32.10
	16	20	48.43	49.29	48.86
	16	25	59.56	60.62	60.09
	20	25	105.36	107.24	106.30
	20	30	125.50	127.74	126.62