Alterations

Part Number	—	(P·SET·SST·SEU·SSU·SEP·SSP·SEC)
HBLSD8	—	P
HBLSS8	—	SET
HBLSD8	—	P － SET

Alternation	Code	Spec.	Applicable Bracket
Thin Bracket Thin Bracket Hole Position	P	Changes the screw-mounting hole position for Thin Brackets, HBLSD8 .	HBLSD8

Alterations

Code

Spec.

Applicable Bracket

Applicable Screws and Nuts Set
Nuts Set

SET
SST
(Stainless Steel)
SEU
(Pre-Assembly Insertion
Spring Nuts)
SSU
(Pre-Assembly Insertion
Spring Nuts
Stainless steel)
SEP
(Post-Assembly Insertion
Spring Nuts)
SSP
(Post-Assembly
Spring Nut
Stainless steel)
SEC
(Captured Washer
Screws /
Nuts)

Applicable screws and nuts for mounting the bracket on the extrusion come in a set.
　

Example: When HBLSS8 is specified

	Screws		Nut
Code	Part Number	Quantity	Part Number	Quantity
SET	CBM8－15	2	HNTT8－8	2
SST	SCB8－15		HNTTSN8－8
SEU	CBM8－15		HNTU8－8
SSU	SCB8－15		SHNTU8－8
SEP	CBM8－15		HNTP8－8
SSP	SCB8－15		SHNTP8－8
SEC	HCBST8－20		HNTT8－8

[ ! ] When specifying other than HBLSS8, check for the applicable screws and nuts.
　

—

HBLSS8

HBLSSB8

HBLSD8

[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).
[ ! ] Included Screw is not RoHS compliant when -SET, -SEU or -SEP is specified for any bracket other than black anodized ones.

Alteration Details

■Set of applicable Screws and Nuts Details

Alteration Part Number	Screws		Nut
Alteration Part Number	Part Number	Material	Type	Part Number	Material	Stopper
SET	CBM8-15	Steel	Pre-Assembly	HNTT8-8	Steel	Not Provided
SST	SCB8-15	Stainless Steel	Pre-Assembly	HNTTSN8-8	Stainless Steel	Not Provided
SEU	CBM8-15	Steel	Pre-Assembly	HNTU8-8	Steel	Provided
SSU	SCB8-15	Stainless Steel	Pre-Assembly	SHNTU8-8	Stainless Steel	Provided
SEP	CBM8-15	Steel	Post-Assembly	HNTP8-8	Steel	Provided
SSP	SCB8-15	Stainless Steel	Post-Assembly	SHNTP8-8	Stainless Steel	Provided
SEC	HCBST8-20	Steel (With Washers)	Pre-Assembly	HNTT8-8	Steel	Not Provided

■Thin Brackets Hole Position Alteration Type (-P)

Changes the screw-mounting hole position for Thin Brackets.

Thin Brackets for 8 Series (Slot Width 10 mm), Related Image 1_Thin Bracket Hole Position Type

Points:
(1) Since the screws do not interfere with each other, each of bracket side faces can be assembled easily with the extrusion slots in parallel.

(2) Low cost and thin bracket that has achieved space saving of mounting areas

App. Example

■Features of HBLSD8-P (Thin Bracket Hole Position)
Brackets with staggered screw mounting holes.
Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

Product Name	Part Number Example
Thin Brackets	HBLSS8-SET
Aluminum Extrusion	HFS8-4040

Product Name	Part Number Example
Thin Brackets	HBLSD8-P-SET
Aluminum Extrusion	HFS8-4040
Aluminum Extrusion	HFS8-4080

Customers' Opinions

This bracket has expanded the choice of fastening method.
I would like to buy it again because the price is lower than similar products from other manufacturers.
Because if its thin shape, the appearance of the tightening section is neat. I am satisfied with that.

Technical Information

■How to Specify Allowable Load of Bracket

Thin Brackets for 8 Series (Slot Width 10 mm), Related Image 1_Technical Information

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

■Perpendicularity

Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.

■Mechanical Properties of Aluminum Extrusions (JIS standard as reference)

Material (JIS Symbol)	A6N01SS-T5
Tensile Strength (N/mm²)	245 or more
Yield Stress (N/mm²)	205 or more
Young's Modulus (N/mm²)	69972
Brinell Hardness (HB)	88
Surface Treatment	Anodize 9 µm or more

Similar Products

■8 Series (Slot Width 10 mm) - For 1 Slot, Extruded Thick Brackets

Product Name	Thin Brackets	Thick Brackets	Ultra Thick Brackets	Thick Brackets / Triangle Brackets	Offset Brackets	Unequal Sided Brackets	Brackets for Connecting Different Sizes of Extrusions 　 Brackets
Product Photo
Features	The brackets do not protrude from extrusion widths when used to cross connect extrusions. Suitable for use in limited space.	Made of the same material as aluminum extrusions with anodizing. Suitable when appearance well balanced with the extrusions is desired.	Numbers of screws are the same as those of thick brackets. Extrusions can be connected more securely.	Two mounting holes are provided on one side. Extrusions can be connected more securely with 4 screws.	Hole positions are offset. Can be combined with plates of 3 mm and 5 mm thickness when mounting plates on the side.	The vertical and horizontal lengths are unequal to each other. Usable where space is narrow.	Staggered mounting holes. Brackets to connect 40 and 30 square Extrusions.
Allowable Load	1666	2058	2058	3087	2058	2572	—
Representative models	This Product	NBLTS8	HBLUS8	HBLTSW8 (Thick Type)	HBLTH8	HBLTF8	HBLTS8-6L
Representative models	This Product	HBKTST8 (Perpendicularly Machined)	HBKUS8 (Perpendicularly Machined)	HBLDSWT8 (Triangle)	HBLTH8	HBLTF8	HBLTS8-6L

Type	[M] Material	[S] Surface Treatment
HBLS□8	A6N01SS−T5	Anodize
HBLSSB8	A6N01SS−T5	Black Anodize

Low Profile Bracket - 8 Series, 10mm Groove

Caution

Product Description