Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames
Brand :
MISUMI
Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Product Description
This is Frame cap for protecting frame end faces. Using with Aluminum Frame Series 6 (Slot width 8mm)
Dimensional Drawing
HFC6−3030
HFCL6−3030
HFC6−3060
HFCL6−3060
HFC6−3090
HFC6−606030
HFC6−6060
HFC6−6090
HFC6−60120
HFC30A6
HFC45A6
HFC60A6
HFCR6−3030
HFC6−5050
HFC6−50100
HFC6−100100
GFC6−3030
GFC6−3060
[!] The model numbers in red in the above dimensional drawings are new products with additional specifications. It is not listed in the paper catalog.
[ ! ] HFC and HFCL can be used for each Aluminum Extrusion other than GFS / GNFS Series.
| Type | [M] Material |
| HFC GFC | Polyamide |
| HFCL | Low Density Polyethylene |
Specifications / Overview
For High-Rigidity Aluminum Extrusions
Introduction of Plastic Extrusion End Cap
Introduction of Plastic Extrusion End Cap
| Do you have the following issues? |
| Issue 1 | There is no resin extrusion end cap for high-rigidity aluminum extrusions. |
|---|---|
| Issue 2 | Alteration is required to attach the extrusion end cap to a high-rigidity aluminum extrusion. |
![[Factory Automation New Product]6 Series (Slot Width 8 mm) - Extrusion End Caps for Aluminum Extrusions: Related Image](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110300446540/110300446540_013_20230801115852.png)
| Plastic Extrusion End Cap GFC-3030 for high-rigidity aluminum extrusions solves the problem. |
| Solution >> No alteration is required for the aluminum extrusion. Can be installed on any aluminum extrusion of the same shape. |
| Product Photo | App. Example Can be installed without any alteration on the aluminum extrusion. | |
 |  |
* Currently only GFS/GNFS6-3030 and GFS/GNFS8-4040 are available.
| Customers’ Opinions |
We used to manufacture extrusion caps for high-rigidity aluminum extrusion in-house, but this new product saves us a lot of time and money.
![[Factory Automation New Product]6 Series (Slot Width 8 mm) - Extrusion End Caps for Aluminum Extrusions: Related Image](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110300446540/110300446540_014_20230801115852.png)
We purchased and used with the new high-rigidity aluminum extrusion GNFS Series.
| Related Products |
- High-Rigidity Aluminum Extrusions 6 Series
![[Factory Automation New Product]6 Series (Slot Width 8 mm) - Extrusion End Caps for Aluminum Extrusions: Related Image](//content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110300446540/110300446540_016_20230801115852.png)
- GNFS6 Series
![[Factory Automation New Product]6 Series (Slot Width 8 mm) - Extrusion End Caps for Aluminum Extrusions: Related Image](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110300446540/110300446540_016_20230801115852.png)
- High-Rigidity Aluminum Extrusions 8 Series
![[Factory Automation New Product]6 Series (Slot Width 8 mm) - Extrusion End Caps for Aluminum Extrusions: Related Image](//content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110300446540/110300446540_017_20230801115852.png)
- GNFS8 Series
![[Factory Automation New Product]6 Series (Slot Width 8 mm) - Extrusion End Caps for Aluminum Extrusions: Related Image](http://content.misumi-ec.com/image/upload/t_msmwm_wyg/v1/p/jp/product/wysiwyg/110300446540/110300446540_017_20230801115852.png)