Extruded Thick Bracket - 6 Series, 8mm Groove, 1-Row Groove
Brand :
MISUMI
Caution
Product Description
It is an aluminum extrusion type bracket. It has a structure that is aesthetically excellent and does not easily collect dust.
Dimensional Drawing of 90 degree Brackets
NBLTS6
HBLTS6
HBLTS6-5 (for M5 bolts)
HBLTSB6 (black anodized)
CHBLTS6 (clear coating)
HBLTS6
HBLTS6-5 (for M5 bolts)
HBLTSB6 (black anodized)
CHBLTS6 (clear coating)
*HBLTS6-5 is φ5.5
[ ! ] NBLTS6 does not have
anodizing on both sides or bolt holes .
[ ! ] Bolts and nuts are also available as a set. Please see the additional modifications below.
| Type | [M] Material | [S] Surface Treatment |
| NBLTS6 | A6063S-T5 | Anodized [ ! ] |
| HBLTS6(−5) | A6N01SS-T5 | |
| HBLTSB6 | Black Anodized | |
| CHBLTS6 | Clear coating (anodized + clear coating) |
Specification Table of 90 degree Brackets
| Model |
| HBLTS6 |
・The price list below is current as of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Model | Mass (g) | Suitable bolts and T-nuts | Allowable load (N) | |||
| Type | bolt | Quantity | T-Nut | Quantity | ||
| NBLTS6 | 44 | CBM6-15 | 2 | HNTT6-6 | 2 | 1176 |
| HBLTS6 | ||||||
| HBLTS6-5 (for M5 bolts) | CBM5-15 | HNTT6-5 | ||||
| HBLTSB6 * (Black anodized) | CBM6-15 | HNTT6-6 | ||||
| CHBLTS6 (clear coating) | ||||||
Additional Processing of 90 degree Brackets
| Model | − | (C・SET・SST・SEU・SSU・SEP・SSP・SEC) |
| HBLTS6 | − | SET |
| HBLTS6 | − | C-SET |
| Alterations | Code | Spec. | Applicable bracket |
Additional cover mounting holes | C | The bracket is tapped for mounting the cover (M5 on both sides) (Mounting screws are HCBM) .  | HBKTS6 |
| NBLTS6 | |||
| HBLTS6 | |||
| HBLTS6-5 | |||
| CHBLTS6 | |||
| HBKUS6 |
| Alterations | Code | Spec. | Applicable bracket | |||||||||||||||||||||||||||||||||
| Applicable bolts and nuts included | SET SST (stainless steel) SEU (pre- assembly spring nut) SSU (pre-assembly spring nut stainless steel) SEP (post- assembly spring nut) SSP (post-assembly spring nut stainless steel) SEC ( bolt and nut with washer ) | The applicable bolts and nuts for attaching the 90 degree Brackets to the frame are included in the set. (Added to the bracket price) (Example) When specifying NBLTS6
[ ! ] When specifying a type other than HBLTS6, | − | |||||||||||||||||||||||||||||||||
| HBKTST6 | ||||||||||||||||||||||||||||||||||||
| HBKTS6 | ||||||||||||||||||||||||||||||||||||
| NBLTS6 | ||||||||||||||||||||||||||||||||||||
| HBLTS6 | ||||||||||||||||||||||||||||||||||||
| HBLTS6-5 | ||||||||||||||||||||||||||||||||||||
| HBLTSB6 | ||||||||||||||||||||||||||||||||||||
| CHBLTS6 | ||||||||||||||||||||||||||||||||||||
| HBKUS6 | ||||||||||||||||||||||||||||||||||||
■ Hole processing for cover installation (-C) of 90 degree Brackets
M5 tapped holes can be added on both sides.
Alteration model example: HBLTS6-C
■ Details 90 degree Brackets of applicable bolt and nut sets
| Additional processing model | bolt | nut | ||||
|---|---|---|---|---|---|---|
| Model | Material | type | Model | Material | Stopper | |
| SET | CBM6-15 | iron | First in | HNTT6-6 | iron | none |
| SST | SCB6-15 | stainless | First in | HNTTSN6-6 | stainless | none |
| SEU | CBM6-15 | iron | First in | HNTU6-6 | iron | Yes |
| SSU | SCB6-15 | stainless | First in | SHNTU6-6 | stainless | Yes |
| SEP | CBM6-15 | iron | Later insertion | HNTP6-6 | iron | Yes |
| SSP | SCB6-15 | stainless | Later insertion | SHNTP6-6 | stainless | Yes |
| SEC | HCBST6-20 | Iron (with washer) | First in | HNTT6-6 | iron | none |
*For HBLTS6-5 only, the bolts and nuts in the set are for M5 diameter. (Example: CBM5-15, HNTT6-5)
How to Use of 90 degree Brackets
■ Example of connecting frames: Connection using thick 90 degree Brackets
| merchandise | Model example |
|---|---|
| Bracket (bolt and nut set) | HBLTS6-SET |
| Aluminum frame | HFS6-3030 |
Similar Products of 90 degree Brackets
■ 6 Series (groove width 8 mm) - For single row grooves - Extrusion type 90 degree Brackets
| Product name | Thick bracket | Extra thick bracket | Thick bracket/ triangle bracket | Eccentric bracket | Unequal Side Bracket | Different size frame connection bracket | Thin bracket |
|---|---|---|---|---|---|---|---|
| Product Photos |
|
|
|
|
|
|
|
| Features | This type is made of the same material as the aluminum frame and has been anodized. It is effective when you want to unify the appearance with the frame. | The thick bracket and bolts are the same number, allowing for a stronger connection. | This type has two mounting holes on one side. Since it uses four bolts, it can be connected to the frame more firmly. | The hole positions are off-center, so when attaching a plate to the side, 3mm/5mm thick plates can be installed by aligning them with the frame surface. | The length and width are unequal, allowing it to be installed in narrow spaces. | The mounting holes are staggered. There are types that can connect 20mm and 30mm, 40mm, 45mm and 30mm frames. | This bracket does not protrude from the frame when cross-connecting, making it possible to use in tight spaces. |
| Allowable load | 1176 | 1176 | 1764 | 1176 | 1470 | - | 980/1568/2352 |
| Representative Model | This product | HBLUS6 | HBLTSW6 (thick type) | HBLTH6 | HBLTF6 | HBLTS6-5L | HBLSS6 |
| HBKTST6 (Right-angle processing type) | HBKUS6 (Right-angle processing type) | HBLDSWT6 (Triangle) | HBLTS8-6L | HBLSP6 (with protrusion) |
■ Difference between extrusion type 90 degree Brackets and protrusion brackets
| [This product] Extrusion type bracket | · The material of the extrusion 90 degree Brackets is A6N01SS-T5, and it is made by extruding aluminum. The surface is anodized. · It is effective when you want to unify the appearance with the frame. It is structured to prevent dust accumulation. · It is stronger than a 90 degree Brackets with protrusions, so it is ideal for places where strength is required. |
| 90 degree Brackets with protrusion | ・The protrusion 90 degree Brackets is a bracket made of ADC12 material using a mold. It is generally not anodized and is less expensive than the same size extrusion type bracket. ・The protrusion acts as a rotation stopper during fastening work, making it easy to work with. ・There are various types of 90 degree Brackets with additional functions. |
Technical Information of 90 degree Brackets
■ Perpendicularity of 90 degree Brackets
The squareness of the extruded bracket is manufactured within a tolerance of ±1° based on the JIS standard H4100 special grade.
If squareness is important, please see the square-angle processed type . (For the 6 series: squareness of 0.03 and 0.06 are available.)
■ 90 degree Brackets allowable load concept
As shown in the left figure, two frames are set up, a frame is placed between them, and two 90 degree Brackets are attached underneath, and the allowable load per unit is shown. The allowable load
here indicates the load at which the 90 degree Brackets can maintain its position (without breaking or slipping) when all mounting holes on the bracket are fixed with bolts and a load is applied.
here indicates the load at which the 90 degree Brackets can maintain its position (without breaking or slipping) when all mounting holes on the bracket are fixed with bolts and a load is applied.
■ Mechanical properties of aluminum frame material (JIS standard reference)
| Material (JIS symbol) | A6063S-T5 | A6N01SS-T5 |
|---|---|---|
| Tensile strength (N/ mm2 ) | Over 155 | 245 and above |
| Strength (N/ mm2 ) | Over 110 | Over 205 |
| Modulus of elasticity (N/ mm2 ) | 69972 | 69972 |
| Brinell hardness (HB) | 88 | 88 |
| Surface Treatment | Anodizing 9μm or more | Anodizing 9μm or more |
Related Items of 90 degree Brackets
■ 6 Series (groove width 8mm) of 90 degree Brackets
| Product name | Aluminum frame | Blind Joint | Frame cap | Groove cover | nut |
|---|---|---|---|---|---|
| photograph |
|
|
|
|
|
| Product page | Here | Here | Here | Here | Here |