Miniature Cam Followers-General, Low Particle Generation/Heavy Load

Brand :

MISUMI

Caution

[Specification Change] The materials, appearances, and packaging specifications of some products will be changed sequentially starting in December 2025. Please see here for details and applicable part numbers. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Feature] Available with a minimum outer diameter of ⌀5. Materials can be selected from steel and stainless steel.

Drawing

■General, Low Dust
Miniature Cam Follower: Related Image

■Heavy Load [ ! ] Full Roller for Heavy Load
Miniature Cam Follower: Related Image

[Note]: Thread diameter of Miniature Cam Follower is small.
To prevent damage, use torque wrench and secure within the maximum tightening torque.
(Please note that the maximum tightening torque for a miniature cam follower is about one-fourth of that of the conventional equivalents.)

[ ! ] Operating Temp.: 80°C or lower

[ D ] Dimension Tolerance: 0 to -0.008 mm

Product Specifications

Application		Type	[ M ] Material	[ A ] Accessory
General	General	CFFAN	SUJ2^*1 (Stud: SCM steel)	Hex Nut 1 pc. (S45C Carbon Steel^*2, Black Oxide)
	General	CFFAM	SUS440C Equivalent	Hex Nut 1 pc. (SUS304)
	Low Dust Generation	CFFAMC	SUS440C Equivalent	Hex Nut 1 pc. (SUS304)
Heavy Load	Heavy Load	CFFANG	SUJ2^*1 (Stud: SCM steel)	Hex Nut 1 pc. (S45C Carbon Steel^*2, Black Oxide)
Heavy Load	Heavy Load	CFFAMG	SUS440C Equivalent	Hex Nut 1 pc. (SUS304)

^*1 uses equivalent materials in some parts, and ^*2 uses General Structural Steel in some parts. Please see here for details and applicable part numbers.