Shaft Collar (Clamp) - 2-Hole / 2-Tapped (Coarse)

Brand :

MISUMI

Caution

Product Description

"Since the mounting hole is machined, this product can be mounted on plates and brackets."

Dimensional Drawing

2-Hole

2-Tapped (Coarse)

* D6 to D25:C0.5
D30 to D50:C1

Shaft Collar - Clamp, 2-Hole/2-Tapped, Dimensional Drawing

Type				[ M ] Material	[ S ] Surface Treatment	[ A ] Accessory
Standard		Compact				[ A ] Accessory
2-Hole	2-Tapped	2-Hole	2-Tapped			Hex Socket Head Cap Screw 1 pc.
SCSM	SCSW	SCSMJ	SCSWJ	S45C Equivalent	Black Oxide	[ M ] SCM435 Equivalent
PSCSM	PSCSW	PSCSMJ	PSCSWJ	S45C Equivalent	Electroless Nickel Plating	[ M ] SUS304 Equivalent
SSCSM	SSCSW	SSCSMJ	SSCSWJ	SUS304 Equivalent	—
SCSMA	SCSWA	—	—	2000 Series Aluminum Alloy	—
SCSMAW	SCSWAW	—	—	2000 Series Aluminum Alloy	Clear Anodize

[ ! ] Select the shaft diameter according to the inner diameter D dimension.
The recommended tolerance is g6, h5, or f8 for the shaft (outer diameter tolerance), and g6 or h7 for the rotating shaft (outer diameter tolerance).
[ ! ] The included hex socket head cap bolt is for tightening the slit section.
Mounting bolts are not included for either the hole or tapping type, so please prepare them separately.
· For the hole type, please check the hole diameter using the "S" dimension in the specification table.
· For the tapping type, please check the bolt size using the "M1" dimension in the specification table.