(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

[Package Product] Bolting Joints for Mold Cooling - For High Temperature (180°C Series) / Straight Joints -【10 Pieces Per Package】

[Package Product] Bolting Joints for Mold Cooling - For High Temperature (180°C Series) / Straight Joints -

Click this image to zoom it.

Move the mouse over the image to zoom

<10PACK-NASC>
[Features]
・Tube can be attached and detached with one touch.


[Notes]
・Can be used with both water and oil.
・Please use at water temperature below 180℃.

PDF

[Package Product] Bolting Joints for Mold Cooling - For High Temperature (180°C Series) / Straight Joints: Related Image
Use the tube for hot water (for M-SFT, see here).

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
10PACK-NASC6-01
10PACK-NASC8-01
10PACK-NASC8-02
10PACK-NASC10-02
Part NumberStandard Unit PriceNumber of pc(s). included in pkg.Minimum order quantityVolume DiscountDays to ShipRoHSTapered male thread R (PT) Applicable tube outer diameter
(mm)

SGD 137.92

10 Pieces Per Package

1 Pack(s) 6 Day(s) 101/86

SGD 170.87

10 Pieces Per Package

1 Pack(s) 6 Day(s) 101/88

SGD 170.87

10 Pieces Per Package

1 Pack(s) 6 Day(s) 101/48

SGD 241.66

10 Pieces Per Package

1 Pack(s) 6 Day(s) 101/410

Loading...

  1. 1

Specification Table

[Package Product] Bolting Joints for Mold Cooling - For High Temperature (180°C Series) / Straight Joints: Related Image
Applicable TubeTube Insertion HoledLaCap NutMetal BodyPart Number
OD ×IDHole Diameter PDepth CFB1 (opposite side)l1B2 (opposite side)R (PT)Type
6×4673.42621.512.5129121/810PACK-NASC (Stainless Steel)
8×687.55.42823.514149141/8
8×687.55.43024.5141411141/4
10×7.51086.93226.515.51711171/4

Specifications/Overview

■ Characteristics
· Can be used with both water and oil.
· Use at water temperature of 180°C or lower.
*Notes
· In order to prevent injuries and burns caused by splashing water and hot water, make sure that the pressure of the tube is zero and that the water temperature has dropped below 30°C before removing the joint.
· Do not apply loads such as tension, torsion or bending to the joint. (It may damage the joint.)
· Do not apply water hammer (percussive flow), etc.
· For safety, be sure to stop the fluid (water, oil or air) before detaching.

Basic Information

Product Fitting Material Stainless Steel Heat resistance 180℃
Shape Straight With/without wrench installation section Available Sales Unit(PACK) 10

Tech Support