(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Cartridge Heaters With Lead Wire Bottom Reinforced -L Dimension・Wattage・Flange Selection-

Cartridge Heaters With Lead Wire Bottom Reinforced -L Dimension・Wattage・Flange Selection-

Click this image to zoom it.

Move the mouse over the image to zoom

Sales numbers are increasing!
[Features]
- Strengthens the base of the lead wire to prevent wire breakage.
・You can specify the size, wattage, voltage, and flange shape.
・If you specify additional machining SP, a spring can be attached to protect the lead wire

PDF

(1)Stainless sheath
     SUS304(S30400)(1.4301)
(2)Flange
     SUS304(S30400)(1.4301)
Lead heat resistance temperature 180°C

CARTRIDGE  HEATERS  WITH  LEAD  WIRE  BOTTOM  REINFORCED  -L  DIMENSION�WATTAGE�FLANGE  SELECTION-:Related Image
Installation method of flange is caulking or welding (3 points).

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
MNCHA8-[50-400/1]-V[200,​220]-W[50-1100/10]
MNCHA10-[50-400/1]-V[200,​220]-W[50-1600/10]
MNCHA12-[50-400/1]-V[200,​220]-W[50-1800/10]
MNCHA16-[50-600/1]-V[200,​220]-W[50-2000/10]
MNCHB8-[50-400/1]-V[200,​220]-W[50-1100/10]
MNCHB10-[50-400/1]-V[200,​220]-W[50-1600/10]
MNCHB12-[50-400/1]-V[200,​220]-W[50-1800/10]
MNCHN8-[50-400/1]-V[200,​220]-W[50-1100/10]
MNCHN10-[50-400/1]-V[200,​220]-W[50-1600/10]
MNCHN12-[50-400/1]-V[200,​220]-W[50-1800/10]
MNCHN16-[50-600/1]-V[200,​220]-W[50-2000/10]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipWith/without flange D (Heater diameter)
(mm)
V (Voltage)
(V)
W (Wattage)
(W)
Flange shape L (Heater length)
(mm)

-

1 Piece(s) 8 Day(s) or more Yes8200 ~ 22050 ~ 1100A50 ~ 400

-

1 Piece(s) 8 Day(s) or more Yes10200 ~ 22050 ~ 1600A50 ~ 400

-

1 Piece(s) 8 Day(s) or more Yes12200 ~ 22050 ~ 1800A50 ~ 400

-

1 Piece(s) 8 Day(s) or more Yes16200 ~ 22050 ~ 2000A50 ~ 600

-

1 Piece(s) 8 Day(s) or more Yes8200 ~ 22050 ~ 1100B50 ~ 400

-

1 Piece(s) 8 Day(s) or more Yes10200 ~ 22050 ~ 1600B50 ~ 400

-

1 Piece(s) 8 Day(s) or more Yes12200 ~ 22050 ~ 1800B50 ~ 400

-

1 Piece(s) 8 Day(s) or more No8200 ~ 22050 ~ 1100No50 ~ 400

-

1 Piece(s) 8 Day(s) or more No10200 ~ 22050 ~ 1600No50 ~ 400

-

1 Piece(s) 8 Day(s) or more No12200 ~ 22050 ~ 1800No50 ~ 400

-

1 Piece(s) 8 Day(s) or more No16200 ~ 22050 ~ 2000No50 ~ 600

Loading...

  1. 1

Specifications

CARTRIDGE  HEATERS  WITH  LEAD  WIRE  BOTTOM  REINFORCED  -L  DIMENSION�WATTAGE�FLANGE  SELECTION-:Related Image
•Dimension Table
Watt density
(W/cm2)
Part NumberL
1mm increments
V (Voltage)
Selection
W (Wattage)
10W increments
TypeD
2≤W/cm2≤15
W/cm2=W/{D×(L-14)×3.14/100}
MNCHN (No flange)
MNCHA (Flange shape A)
MNCHB (Flange shape B)
850~400200
220
50~1100
1050~1600
1250~1800
MNCHN (No flange)
MNCHA (Flange shape A)
*1650~60050~2000
Specify the wattage such that the W density (W/cm2) is within the range 2≤W/cm2≤15.*MNCHB: Not available for D16.

More Information

■Characteristics:
•Can prevent disconnection fault by reinforcing the bottom part of lead wire.
•Can save storage space as short in length from flange to the lead wire bottom.
•By designating alteration SP and protecting lead with spring, the bending force applied on the lead is relieved and breakage will not occur easily.
 

Alterations

CARTRIDGE  HEATERS  WITH  LEAD  WIRE  BOTTOM  REINFORCED  -L  DIMENSION�WATTAGE�FLANGE  SELECTION-:Related Image

Basic Information

Shape Straight Root shape Bottom reinforced type Heating type Default

Tech Support

Mold
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)