Quick-Fitting Joints For Mold Cooling -Standard Type (Heat-Resistant 60degree Series) / L-Shaped Joints/For Spanner Installation-

[Features]
・Tube can be attached and detached with one touch.

[Notes]
・M-PL, M-POL, and M-PLL are integrated products. Please note that it cannot be removed.
・Please use at water temperature below 60℃.
・M-POL: Please use under normal pressure of 300kPa (3kgf/cm2).
・Please keep the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (M-PL, M-PLL → 1MPa, M-POL → 300kPa).