Stepped Ejector Pins -Stainless SUS440C/Tip Diameter・L Dimension Designation Type-

Stepped Ejector Pins -Stainless SUS440C/Tip Diameter・L Dimension Designation Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
EWSF1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-150/1]
EWSF2-[40-200/0.01]-P[0.8-1.9/0.01]-N[15-150/1]
EWSF2.5-[40-200/0.01]-P[0.8-2.4/0.01]-N[15-150/1]
EWSF3-[40-200/0.01]-P[1-2.9/0.01]-N[15-150/1]
EWSF3.5-[40-200/0.01]-P[1.5-3.4/0.01]-N[15-150/1]
EWSF4-[40-200/0.01]-P[1.5-3.9/0.01]-N[15-150/1]
EWSF4.5-[40-200/0.01]-P[2.5-4.4/0.01]-N[15-150/1]
EWSF5-[40-200/0.01]-P[3-4.9/0.01]-N[15-150/1]
EWSF5.5-[40-200/0.01]-P[3.5-5.4/0.01]-N[15-150/1]
EWSF6-[40-200/0.01]-P[4-5.9/0.01]-N[15-150/1]
EWSJF4-[50-200/0.01]-P[1.5-3.9/0.01]-N[30-150/1]
EWSJF4.5-[50-200/0.01]-P[2.5-4.4/0.01]-N[30-150/1]
EWSJF5-[50-200/0.01]-P[3-4.9/0.01]-N[30-150/1]
EWSJF5.5-[50-200/0.01]-P[3.5-5.4/0.01]-N[30-150/1]
EWSJF6-[50-200/0.01]-P[4-5.9/0.01]-N[30-150/1]
Part NumberVolume DiscountDays to ShipHead thickness D (Shaft diameter)
(mm)
P (Tip diameter)
(mm)
L (L dimension)
(mm)
N
(mm)
5 Day(s) or more 4mm(T4)1.50.6 ~ 1.440 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)20.8 ~ 1.940 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)2.50.8 ~ 2.440 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)31 ~ 2.940 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)3.51.5 ~ 3.440 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)41.5 ~ 3.940 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)4.52.5 ~ 4.440 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)53 ~ 4.940 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)5.53.5 ~ 5.440 ~ 20015 ~ 150
5 Day(s) or more 4mm(T4)64 ~ 5.940 ~ 20015 ~ 150
5 Day(s) or more 6mm(JIS)41.5 ~ 3.950 ~ 20030 ~ 150
5 Day(s) or more 6mm(JIS)4.52.5 ~ 4.450 ~ 20030 ~ 150
5 Day(s) or more 6mm(JIS)53 ~ 4.950 ~ 20030 ~ 150
5 Day(s) or more 6mm(JIS)5.53.5 ~ 5.450 ~ 20030 ~ 150
5 Day(s) or more 6mm(JIS)64 ~ 5.950 ~ 20030 ~ 150

Loading...

  1. 1

Basic Information

Material SUS440C Tip diameter tolerance (Reference tolerance) 0/-0.005 Shaft diameter tolerance (Reference tolerance) 0/-0.02
Surface treatment No Tip shape No Character engraving type No
Number of engraving characters No Gas release shape No

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support