Joints（Shape：L-shaped）

• 

  Quick-Fitting Joints For Mold Cooling -Standard Type (Heat-Resistant 60degree Series) / L-Shaped Joints/For Spanner Installation-

  MISUMI

  [Features]
  ・Tube can be attached and detached with one touch.
  
  [Notes]
  ・M-PL, M-POL, and M-PLL are integrated products. Please note that it cannot be removed.
  ・Please use at water temperature below 60℃.
  ・M-POL: Please use under normal pressure of 300kPa (3kgf/cm2).
  ・Please keep the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (M-PL, M-PLL → 1MPa, M-POL → 300kPa).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 4.36-
  Days to Ship:	Same day or more

• 

  Bolting Joints For Mold Cooling -For High Temperature (Heat-Resistant 120degree Series)/L-Shaped Joints-

  MISUMI

  [Characteristics]
  - It has a tube insert section and is tightened with a cap nut, so it connects and secures the tube securely.
  Also, torque management is not required.
  
  [Precautions]
  - Please use at a water temperature of 120℃ or less.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.42-
  Days to Ship:	4 Day(s) or more

• 

  Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets (Heat-Resistant 120degree Series) /L-Shaped Joints-

  MISUMI

  [Features]
  - Tubes can be attached and detached with one touch.
  [Notes]
  ・M-120KL and M-120KH are integrated products. Please note that it cannot be removed.
  - Please use at a water temperature of 120℃ or below.
  - Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (1MPa).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.59-
  Days to Ship:	Same day or more

• 

  Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets/(Heat-Resistant 99degree Series)/L-Shaped Joints-

  MISUMI

  [Features]
  ・Tube can be attached and detached with one touch.
  [Note]
  ・M-KL and M-KH are integrated products. Please note that it cannot be removed.
  ・Please use at water temperature below 99℃.
  ・Please use by keeping the surge pressure (instantaneous pressure applied due to impact flow, etc.) to below the maximum working pressure (1MPa).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 7.84-
  Days to Ship:	Same day or more

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/(Heat-Resistant 120degree Series)/Sets-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  ・When the plug is removed, no socket protrusions remain in the mold.
  ・Heating medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape etc. after that.)
  
  [Notes]
  ・Please use at a water temperature of 120℃ or less.
  ・Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 31.21-
  Days to Ship:	4 Day(s) or more

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/ (Heat-Resistant 99degree Series) /Sets-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  ・When the plug is removed, no socket protrusions remain in the mold.
  ・Heating medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)
  
  [Notes]
  ・Please use at a water temperature of 99°C or below.
  ・Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 23.02-
  Days to Ship:	4 Day(s) or more

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/(Heat-Resistant 99degree Series) /Plugs-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  - When the plug is removed, no socket protrusions remain on the mold.
  - Heat medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)
  
  [Notes]
  - Please use at a water temperature of 99°C or below.
  - Please use the product by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 18.31-
  Days to Ship:	4 Day(s) or more

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets (Heat-Resistant 120degree Series)/Plugs-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  - When the plug is removed, no socket protrusions remain on the mold.
  - Heat medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)
  
  [Notes]
  - Please use at a water temperature of 120℃ or less.
  - Please use the product by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 26.50-
  Days to Ship:	4 Day(s) or more

Loading...