Damper Hinges, Spring Hinges（Page2）

• 

  Torsion Arm B-440

  TAKIGEN

  Ideal for reducing opening and closing of weighted covers, such as gratings.
  
  [Features]
  · Weighted covers such as gratings can be opened easily.
  · Since it uses a spring, there is no worry of gas or oil leakage.
  · Excellent corrosion resistance

  CAD ：

  2D / 3D

  Standard Price:	SGD 492.88
  Days to Ship:	4 Day(s) or more

• 

  Snap-in Spring Hinge SSRH

  IMAO CORPORATION

  [Features]
  · Use as a pin hinge for a sheet metal door that requires removability.
  · Installation is easy, simply insert into the round hole.
  · With the built-in spring, when the L-shaped part is pulled, the pin releases the retracting hand and returns to the original position.

  Standard Price:	SGD 11.11
  Days to Ship:	9 Day(s) or more

• 

  FDT-63A/FDN-63A Series [Two-Way] [One-Way]

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · Velocity characteristics.
  · The torque of the disc damper changes according to the rotation speed.
  · As per the figure below, generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · Temperature characteristics.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal, the torque also returns to its original value.
  · Temperature characteristics graph is as shown in the figure

  CAD ：

  2D

  Standard Price:	SGD 24.29-
  Days to Ship:	4 Day(s) or more

• 

  FRN-P2 series option rack

  FUJI LATEX

  This option is a FRN-P2 series G1 gear dedicated rack gear.
  
  [Features]
  · Speed characteristics
  · The torque of the rotary damper changes according to the rotation speed.
  · In general, as shown in the figure on the right, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · In addition, the torque at startup is slightly different from the rated torque.
  · Temperature characteristics
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, as shown in the figure on the right, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change, hence if the temperature returns to original, the torque returns to the original.

  CAD ：

  2D

  Standard Price:	SGD 5.43
  Days to Ship:	23 Day(s) or more

• 

  FYN-S1 Series Swing Damper [One-Way]

  FUJI LATEX

  This damper is a high-torque type metal (zinc die-cast) oscillating damper. In addition, even if the load changes, the same kind of movement is achieved due to the self-adjusting characteristics.

  CAD ：

  2D

  Standard Price:	SGD 42.11
  Days to Ship:	11 Day(s) or more

• 

  Rotary Damper TD102

  TOK BEARING

  [Features]
  · Ultra-compact, ultra-thin damper.
  · Bidirectional endless damper.
  · Small standard shape.

  CAD ：

  2D / 3D

  Standard Price:	SGD 3.32-
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper TD22

  TOK BEARING

  External diameter ø16.2 (mm) and 3.92N/m torque allowed. *The CAD data for this series is currently being revised. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 52.57
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper TD56

  TOK BEARING

  Excellent response quality. Maximum 2.94N/m torque allowed. *The CAD data for this series is currently being revised. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 18.78-
  Days to Ship:	8 Day(s) or more

• 

  Auto Hinge B-193

  TAKIGEN

  [Features]
  ·A built-in compression spring reduces the weight of the lid.
  ·Rotational torque can be adjusted with the adjusting screw even after installation.
  [Applications]
  ·For various weight canopies.

  CAD ：

  2D

  Standard Price:	SGD 92.63
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Concealed Torque Hinge B-1238-2

  TAKIGEN

  [Features]
  ·Holds the door at an arbitrary angle.
  ·Concealed hinge type that does not protrude from the surface of a door.
  · Using the adjustment nut, the torque value can be changed.
  [Applications]
  ·For office equipment, furniture, and control panels.

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.71
  Days to Ship:	Same day

• 

  Flat Torque Hinge (BP-148 / Plastic)

  TAKIGEN

  [Features]
  · Hold the door at an arbitrary angle.
  · Can change the hardness of the torque by turning the adjustment bolt.
  · Flame retardant materials are used (main body/UL94-HB/shaft/UL94 V-2).

  CAD ：

  2D / 3D

  Standard Price:	SGD 26.52-
  Days to Ship:	Same day or more

• 

  Rotary Damper (BP-879 / Plastic)

  TAKIGEN

  [Features]
  · Appropriate damper characteristics can be obtained within the rotation range (in the direction of the arrow) of 180° (rotation in the reverse direction of the arrow is no load).
  · Due to the compact hexagonal shape, setting it into the door is easy.
  · Damper characteristics: closing time 10 ± 5 seconds.
  · In a tolerance test of 100,000 repetitions (at normal temperature), closing time is more than 2.5 seconds.

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.06
  Days to Ship:	Same day or more

• 

  FDT-70A/FDN-70A Series [Two-Way] [One-Way]

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · The torque of the disc damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · The viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal the torque also returns to the original value

  CAD ：

  2D

  Standard Price:	SGD 25.34-
  Days to Ship:	4 Day(s) or more

• 

  FFD-28FS/FW/SS/SW Series Friction Damper [One-Way]

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  CAD ：

  2D

  Standard Price:	SGD 20.10
  Days to Ship:	48 Day(s) or more

• 

  FFD-30FS/FW/SS/SW Series Friction Damper [One-Way]

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  CAD ：

  2D

  Standard Price:	SGD 20.10
  Days to Ship:	4 Day(s) or more

• 

  FHD-B1/B2 Series, Friction Hinge Damper [Bidirectional]

  FUJI LATEX

  This damper is a friction type damper in the shape of a hinge. Easy to install, and torque is applied both in the opening direction and closing direction.
  
  [Features]
  · Damper characteristics vary with the operating environment temperatures. The damper characteristics become weaker as the temperature rises, and becomes stronger as the temperature decreases.
  · This is because the shaft bush inside the damper changes as an effect of the temperature, and if the temperature returns to normal, the damper characteristics return to normal as well

  CAD ：

  2D

  Standard Price:	SGD 18.63
  Days to Ship:	33 Day(s) or more

• 

  FRT-L1 Series, Rotary Damper [Two-Way]

  FUJI LATEX

  This rotary damper is small yet the torque is high, with a flange that makes installation easier.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  CAD ：

  2D

  Standard Price:	SGD 13.81-
  Days to Ship:	4 Day(s) or more

• 

  FRT/FRN-C2 Series Rotary Damper [Two-Way] [One-Way]

  FUJI LATEX

  This small damper is available in 2 types of torque, one that works in both directions and the other in one direction. We also offer both types with and without gear.

  CAD ：

  2D

  Standard Price:	SGD 5.43-
  Days to Ship:	4 Day(s) or more

• 

  FYN-D3 Series Swing Damper [One-Way]

  FUJI LATEX

  This damper is a high torque type metal (zinc die cast) oscillating damper. Moreover, it has a wide operating range, with 180° of operation angle.

  CAD ：

  2D

  Standard Price:	SGD 44.82
  Days to Ship:	11 Day(s) or more

• 

  FYT/FYN-D1(D2) Series Swing Damper [Two-Way] [One-Way]

  FUJI LATEX

  This damper is a high-torque type metal (zinc die-cast) oscillating damper. In addition, there are 2 types of characteristics, unidirectional and bi-directional.

  CAD ：

  2D

  Standard Price:	SGD 34.77
  Days to Ship:	11 Day(s) or more

• 

  Rotary Damper TD42

  TOK BEARING

  Excellent response quality. Maximum 8.83N/m torque allowed. Note: The CAD data for this series is being corrected. Please wait for a while until the correction is completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 44.87-
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper, TD73

  TOK BEARING

  [Features]
  · Smallest diameter damper by the manufacturer (about 2/3 of conventional products).
  · Slim and ultra-compact shape with outer diameter ø 11 [mm] (manufacturer's smallest diameter damper), housing length 22 [mm], maximum torque 0.29N/m (3kgf/ cm) achieved.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.05-
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper TD75

  TOK BEARING

  [Features]
  · outer diameter ø11 with maximum torque 0.29N/m (3kgf/ cm) achieved.
  · Slim (small and lightweight) 180° open/close type.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.56
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper, TD90

  TOK BEARING

  [Features]
  · Prevents finger pinching (cover assist device).
  · Easy installation, can be retrofitted (processing on the cover side not required).

  CAD ：

  2D

  Standard Price:	SGD 100.63
  Days to Ship:	4 Day(s) or more

• 

  Spring Loaded Square Back Hinge B-81

  TAKIGEN

  [Features]
  ·With a spring, the door opens and closes smoothly.
  [Applications]
  ·Distribution boards, control boards, machine tools.

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.24-
  Days to Ship:	Same day or more

• 

  Damper Hinge (B-153 / Zinc Alloy)

  TAKIGEN

  [Features]
  · Damper characteristics can be obtained within the rotation range of 120°.
  · Easy to install, flat hinge type.
  · Reduces the weight of the door and closes it slowly

  CAD ：

  2D / 3D

  Standard Price:	SGD 106.74
  Days to Ship:	4 Day(s) or more

• 

  Damper Hinge (B-879-0H, Zinc Alloy)

  TAKIGEN

  Dedicated holder for B-879BP-879.
  
  [Features]
  · Inside the hinge B-879-0, 2 pieces can be combined.
  · Various settings can be done, like reciprocating damper type, one direction damper type, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 39.74
  Days to Ship:	Same day

• 

  HEXATORQ B Series (with Brackets)

  ACCURATE

  Grease-less high performance free stop hinge using the friction principle of resin and metal. B type with brackets.

  CAD ：

  2D / 3D

  Standard Price:	SGD 16.45
  Days to Ship:	8 Day(s) or more

• 

  FFD-25FS/FW/SS/SW Series Friction Damper [One-Way]

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  CAD ：

  2D

  Standard Price:	SGD 20.10
  Days to Ship:	4 Day(s) or more

• 

  FRT-E2/E9 Series, Rotary Damper [Bidirectional]

  FUJI LATEX

  This damper is a low cost, compact and thin geared rotary damper, and it can be installed in a space-saving manner.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  CAD ：

  2D

  Standard Price:	SGD 3.33-
  Days to Ship:	11 Day(s) or more

• 

  FRT-N1 Series, Rotary Damper [Two-Way]

  FUJI LATEX

  This rotary damper is small yet the torque is high, with a flange that makes installation easier.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  CAD ：

  2D

  Standard Price:	SGD 9.62
  Days to Ship:	4 Day(s) or more

• 

  FRT/FRN-D2 Series Rotary Damper [Two-Way] [One-Way]

  FUJI LATEX

  This small damper is available in 2 types of torque, one that works in both directions and the other in one direction. We also offer both types with and without gear.

  CAD ：

  2D

  Standard Price:	SGD 11.71-
  Days to Ship:	Same day or more

• 

  FRT/FRN-F2 Series Rotary Damper [Two-Way] [One-Way]

  FUJI LATEX

  [Features]
  · High torque rotary damper that is easy to install.
  · Available in both types of torque, one that works in both directions and the other in one direction.
  · FRT Is a fixed shaft type.
  · The axis of FRN is not fixed.

  CAD ：

  2D

  Standard Price:	SGD 34.77-
  Days to Ship:	4 Day(s) or more

• 

  FRT/FRN-K2 Series, Rotary Damper [Two-Way] [One-Way]

  FUJI LATEX

  High torque rotary damper that is easy to install. Available in both types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · Velocity characteristics: The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · Temperature characteristics: The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  CAD ：

  2D

  Standard Price:	SGD 34.77-
  Days to Ship:	4 Day(s) or more

• 

  FYN-K1 Series Swing Damper [One-Way]

  FUJI LATEX

  This damper is a high-torque resin oscillating damper with unidirectional characteristics. Also, it is easy to install.

  CAD ：

  2D

  Standard Price:	SGD 21.67
  Days to Ship:	92 Day(s) or more

• 

  FYN-M1 Series Swing Damper [One-Way]

  FUJI LATEX

  The torque of this type of damper is strong at the beginning of movement, and becomes weak at the end. This oscillating damper works well with a light door like the flap door on a vending machine.

  CAD ：

  2D

  Standard Price:	SGD 8.74
  Days to Ship:	11 Day(s) or more

• 

  FYT/FYN-H1(H2) Series Swing Damper [Two-Way] [One-Way]

  FUJI LATEX

  This damper is a metal (zinc die-cast) oscillating damper that can adjust characteristics, with high torque. In addition, there are 2 types of characteristics, unidirectional and bi-directional.

  CAD ：

  2D

  Standard Price:	SGD 37.92-
  Days to Ship:	4 Day(s) or more

• 

  FYT/FYN-LA3 Series Swing Damper [Two-Way] [One-Way]

  FUJI LATEX

  This is an adjustable metal (zinc die-cast) oscillating damper that can accommodate a wide damping constant. Also, there are 2 types of characteristics, one-directional and bidirectional.

  CAD ：

  2D

  Standard Price:	SGD 300.95
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper, TD38

  TOK BEARING

  [Features]
  · Opening/closing angle of 180° achieved.
  · The damper can be fixed firmly with screws, and is easy to install.

  CAD ：

  2D

  Standard Price:	SGD 16.20-
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper TD58

  TOK BEARING

  [Features]
  · Infinite angle damper of maximum torque 0.8N/m.
  · Bidirectional type can also be made.

  CAD ：

  2D / 3D

  Standard Price:	SGD 21.42-
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper TD60

  TOK BEARING

  By original design, the body width is 10.9 (mm), and allowable torque is 1.96N m. Excellent response quality. *The CAD data for this series is currently being revised. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 27.84-
  Days to Ship:	4 Day(s) or more

• 

  Rotary Damper, TD69

  TOK BEARING

  [Features]
  · Can be used in high temperature environment (80° C) due to super engineering plastics.
  · At the outer diameter (ø20), a damper torque of 3.43N/m is achieved.

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.77
  Days to Ship:	8 Day(s) or more

• 

  Rotary Damper TD89

  TOK BEARING

  Easy to install compact hinge shape. Main body type Rotary type, Operating environment Standard, Main body material Zinc alloy, Additional function With damper, Opening angle θ (deg) 120, Mounting method Screw mount, Mounting screw hole type Round hole, Minimum required torque (N m) 10.00

  CAD ：

  2D / 3D

  Standard Price:	SGD 78.26
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Torque Hinge with Spring B-1346-PC

  TAKIGEN

  [Features]·Dedicated cover for B1346 manufactured by Takigen.

  CAD ：

  2D / 3D

  Standard Price:	SGD 4.13-
  Days to Ship:	Same day or more

• 

  Plastic, Rotary, Damper BP-885

  TAKIGEN

  Since it is compact, it does not require space for installation. The flap closing speed changes according to the high torque direction and the low torque direction.
  There closing of flap does not make any sound, making it ideal for places requiring silence. Correct damper characteristics can be obtained within the rotation range of 180°.
  For right and left rotation.

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.42
  Days to Ship:	Same day or more

Loading...