Small AC Motors（Type：Set）

• 

  Torque Motor Unit, TM Series

  ORIENTAL MOTOR

  Ideal for winding and pressing mechanism
  
  [Features]
  ・ You can easily set and adjust the motor torque using the internal torque setting device of the power controller, etc.
  ・ Torque settings can be selected using 3 different methods to match how the product is used. Two-stage torque setting is possible by switching internal/external
  ・ The variation of the generated torque with respect to the torque setting value is smaller than that of the conventional torque motor with power controller
  ·It can be used separating the motor and power controller up to 20 m. It can also be used even when the motor installation location and the control panel are separated
  ・ The connection terminals of the power controller are separated top-and-bottom in the control system and motive system, which allows for clean wiring. It can also be directly mounted on the DIN rail

  Standard Price:	SGD 362.00-
  Days to Ship:	12 Day(s)

• 

  Motor for AC Speed Control Unit

  ORIENTAL MOTOR

  - Motor for AC Speed Control Unit from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, 110 VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC, specifications as well as output power of 6 to 90 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Wide Variety of Products Gearheads are available with 26 different gear ratios from 1:2 to 1:360.
  

  Standard Price:	SGD 173.00-
  Days to Ship:	12 Day(s) or more

• 

  Speed Control Motor Unit, MSD Series

  ORIENTAL MOTOR

  [Features]
  ・ Compact non-contact speed control unit with tachometer and speed control motor unit
  ・ Two types of control packs are available depending on the mounting method
  ・ Please use the DIN rail mounting for installation in the switchboard, and the recessed mounting for mounting on the panel for external display
  ・ Compact and easy to operate
  ・ Built-in digital tachometer, accurate rotational speed setting

  Standard Price:	SGD 547.00-
  Days to Ship:	17 Day(s)

• 

  Unit-Type Speed Control Motor US Series

  ORIENTAL MOTOR

  - Unit-Type Speed Control Motor US Series from ORIENTAL MOTOR.
  - The US Series is a panel mounted control unit and speed control motor package.
  - Wiring is performed through an easy connection method utilizing connectors.
  - This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
  - The instantaneous stop function is not available.
  

  Standard Price:	SGD 297.00-
  Days to Ship:	12 Day(s)

• 

  Geared Motor, Dust-Proof and Waterproof Type, FPW Series

  ORIENTAL MOTOR

  4 types of output: 25W, 40W, 60W and 90W
  
  [Features]
  · Geared motor certified by UL as conforming to IEC standard IP67.
  · Appropriate for use in places where water splashed or that are washed regularly.
  · Waterproof type geared motor that can be used in areas affected by moisture.
  · IEC standard IP67-compliant.
  · Not suitable for underwater or high water pressure environments.
  · Uses special coating and updated shaft materials [stainless steel (SUS303 type)] for improved corrosion resistance.
  · Designed and structured to be dust-proof and waterproof.
  · UL/CSA standards certified. CE marking (low voltage directive) compliant.
  · Also, Chinese compulsory product authorization system (CCC system) certified

  Standard Price:	SGD 444.00-
  Days to Ship:	4 Day(s) or more

• 

  AC Motor, KIIS Series

  ORIENTAL MOTOR

  [Features]
  ・ Highly efficient and highly characteristic three-phase motor with optimal design
  ・ Achieves the best characteristics in combination with an inverter
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with stainless steel shaft as standard
  ・ Compatible with H1 grease for food machine
  ・ Compact and lightweight
  ・ Low profile terminal box (Type with terminal box)
  ・ International standards (UL/CSA standard, CCC system, CE marking)

  Standard Price:	SGD 180.00-
  Days to Ship:	12 Day(s) or more

• 

  Induction Motor With Switch Enclosure UB Series

  ORIENTAL MOTOR

  - Induction Motor with Switch Enclosure UB Series from ORIENTAL MOTOR.
  - Switch enclosure with built-in capacitors and switches.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, and three-phase 200 VAC specifications as well as output power of 5.5 to 90 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Overheat protection device type can be selected Impedance protection or Thermal protector.
  

  Standard Price:	SGD 250.00-
  Days to Ship:	61 Day(s)

• 

  Unit-Type Speed Control Motor US Series of Overheat Protection Type

  ORIENTAL MOTOR

  Unit product consisting of board surface mounting type control unit and speed control motor. Single-touch connection just by connecting a connector. Optimal for applications where simple speed control is desired. (No instant stop function.)

  Standard Price:	SGD 317.00-
  Days to Ship:	Same day or more

• 

  High Power Induction Motor BH Series 200 W

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.

  Standard Price:	SGD 669.00-
  Days to Ship:	17 Day(s) or more

• 

  Induction Motor, BH Series, Parallel Shaft Gearhead (Combination Type)

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.
  · Combination type products that are delivered with the motor and gearhead already assembled are available.
  · Mounting to equipment can also be performed easily.
  · Combination type products are delivered with the motor and gearhead already assembled.
  · Mounting work to equipment is reduced.
  · Motor and gearhead can be ordered separately when changing motor/gearhead combinations or when a gearhead is needed for protection.

  Standard Price:	SGD 576.00-
  Days to Ship:	11 Day(s) or more

• 

  Pack-In Type Speed Control Motor Unit, PSH Series

  ORIENTAL MOTOR

  Control pack built into the back of the motor
  
  [Features]
  · Control pack and speed setting volume are built into the back of the motor.
  · Wire connection not required. Operation is also simple.
  · Variable speed range is 50Hz: 90 to 1400r/min and 60Hz90 to 1500r/min.
  · Terminal box type. Appropriate for controlling forward rotation and reverse rotation with an external relay or the like.
  · Plug cord type.
  · Can be switched between forward rotation and reverse rotation with just a CW/CCW switch in the switch box.
  · Simple connection just by connecting AC power cord with plug (2 m) to a commercial power supply

  Standard Price:	SGD 372.00-
  Days to Ship:	17 Day(s)

• 

  Extra Low Speed Synchronous Motor, SMK Series

  ORIENTAL MOTOR

  Continuous rated synchronization motor capable of instant forward/reverse operation
  
  [Features]
  · Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation.
  · Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
  · Rotates precisely in sync with power supply frequency.
  · Rotation speed does not change even if load fluctuates.
  · Capacitor-run motor that can be easily run with just a capacitor (for the SMK5 type, external resistance is also required.
  · Capable of continuous rated drive in both forward and reverse operation.
  · Motor is capable of starting, stopping, and forward/reverse operation within 1.5 cycles of the power supply frequency (0.03 seconds if 50Hz, and 0.025 if 60Hz).
  · Optimal for transport conveyors that start and stop repeatedly, etc.
  · Rotates at a fixed speed even in lowering state.
  · Also appropriate for elevator mechanisms and the like for which a drive with a consistent speed is desired for up/down motion
  ·
  · Extra low-speed synchronous motors have the same structure as stepping motors and use a permanent magnet in their rotors, which gives them slight retention force even as-is.
  · A relatively large retention force can be used by using a gearhead. Convenient for mounting green dampers for absorbing shock, slit panels for origin searching, etc.

  Standard Price:	SGD 233.00-
  Days to Ship:	17 Day(s)

• 

  Electromagnetic brake motor BH series:Solid/Hollow Shaft Gear Head for Orthogonal Shaft (Combination Type)

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.

  Standard Price:	SGD 1,172.00-
  Days to Ship:	17 Day(s) or more

• 

  Induction motor world K series IP65 terminal box

  ORIENTAL MOTOR

  Motor with terminal that corresponds to protection grade IP65. Equipped with metal terminal box.
  
  [Features]
  · IP65 specification suitable for use in factory environments. Uses parts with excellent environment resistance that meet the demands of factory environments.
  Dust-proof and dust-proof performance that corresponds to protection grade IP65, sturdy metal terminal box, etc.
  · "Combination type," delivered with motor and gearhead assembled: Combination type products are delivered with the motor and gearhead already assembled. Can reduce installation man-hours, and eliminates concerns about damaging the motor shaft during assembly.
  · Structure with user-friendly motor terminal box: The terminal box positioned in the back part of the motor not only boasts high environment resistance but also has a user-friendly structure.
  Reasons for user-friendliness
  (1) Wiring is connected with round crimp terminals.·
  (2) The direction of the cable pull-out opening can be changed by the method used to assemble the motor and gearhead.
  (3) Conduit pipe, etc. can be connected after removing the cable gland.
  (4) Compatible with AWG14 (2 mm2) cable. Cable size can be changed to suit the motor output.

  Standard Price:	SGD 321.00-
  Days to Ship:	12 Day(s)

• 

  Speed Control Motor EA968CG-15

  ESCO

  【Product Specifications】
  ・Speed range-50Hz：90/1400rpm、60Hz：90/1700rpm
  ・Voltage-Single phase AC100V
  ・Output-15W
  ・Startup torque (N・m)-0.075
  ・Allowable torque-1200rpm：0.11N・m(50Hz)、0.1N・m(60Hz)90rpm：0.04N・m(50/60Hz)

  Standard Price:	SGD 287.24
  Days to Ship:	4 Day(s) or more

• 

  Speed Control Motor EA968CG-6

  ESCO

  【Product Specifications】
  ・Speed range-50Hz：90/1400rpm、60Hz：90/1700rpm
  ・Voltage-Single phase AC100V
  ・Output-6W
  ・Startup torque (N・m)-0.04
  ・Allowable torque-1200rpm：0.048N・m(50/60Hz)90rpm：0.03N・m(50/60Hz)

  Standard Price:	SGD 270.53
  Days to Ship:	7 Day(s) or more

• 

  Speed Control Motor EA968CG-90

  ESCO

  【Product Specifications】
  ・Speed range-50Hz：90/1400rpm、60Hz：90/1700rpm
  ・Voltage-Single phase AC100V
  ・Output-90W
  ・Startup torque (N・m)-0.55
  ・Allowable torque-1200rpm：0.58N・m(50Hz)、0.53N・m(60Hz)90rpm：0.25N・m(50/60Hz)

  Standard Price:	SGD 556.13
  Days to Ship:	5 Day(s) or more

• 

  Electromagnetic Brake Motor BH Series: Parallel Shaft Gear Head (Combination Type)

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.

  Standard Price:	SGD 954.00-
  Days to Ship:	17 Day(s) or more

• 

  OL Type with LH Linear Head Reversible Motor

  ORIENTAL MOTOR

  LH linear head with reversible motor of the OL type.

  Standard Price:	SGD 525.00-
  Days to Ship:	17 Day(s)

• 

  Motor World K Series with Electromagnetic Brake and IP65 Terminal Box

  ORIENTAL MOTOR

  [Features]
  · Motor with non-excitation operation type electromagnetic brake with terminal box that corresponds to protection grade IP65.
  [Lineup of terminal boxes to go with motors with electromagnetic brakes available]
  · Equipped with non-excitation operation type electromagnetic brake: Because it is equipped with an alternating current non-excitation operation type electromagnetic brake, the motor stops at the same time was when the power supply is OFF, and the load is retained.
  · Optimal for applications requiring load retention: Optimal for applications requiring load retention, such as up/down drives.
  [IP65 specification suitable for factory environments]
  · The world K series motor with terminal box uses parts with excellent environment resistance that meet the demands of factory environments.
  [Dust-proof and drip-proof performance corresponds to protection grade IP65]
  · Uses O-ring in its motor part and an oil sheet structure in its gearhead part to achieve protection gradeIP65. Optimal for use in environments requiring dust-proofing and drip-proofing, such as where cutting fragments, water droplets, and the like are scattered.
  [A sturdy metal terminal box.]
  · Equipped with metal cable gland in its sturdy aluminum die casting terminal box.
  [Structure with user-friendly motor terminal box]
  · The terminal box positioned in the back part of the motor not only boasts high environment resistance but also has a user-friendly structure.
  ["Combination type," delivered with motor and gearhead assembled]
  · Combination type products are delivered with the motor and gearhead already assembled. Can reduce installation man-hours, and eliminates concerns about damaging the motor shaft during assembly.

  Standard Price:	SGD 452.00-
  Days to Ship:	12 Day(s) or more

• 

  Speed Control Motor EA968CG-25

  ESCO

  [Features]ESCO compact AC motor, speed control motor.

  Standard Price:	SGD 301.74
  Days to Ship:	4 Day(s) or more

• 

  Speed Control Motor EA968CG-40

  ESCO

  【Product Specifications】
  ・Speed range-50Hz：90/1400rpm、60Hz：90/1700rpm
  ・Voltage-Single phase AC100V
  ・Output-40W
  ・Startup torque (N・m)-0.18
  ・Allowable torque-1200rpm：0.27N・m(50Hz)、0.2N・m(60Hz)90rpm：0.09N・m(50/60Hz)

  Standard Price:	SGD 335.02
  Days to Ship:	4 Day(s) or more

• 

  Speed Control Motor EA968CG-60

  ESCO

  【Product Specifications】
  ・Speed range-50Hz：90/1400rpm、60Hz：90/1700rpm
  ・Voltage-Single phase AC100V
  ・Output-60W
  ・Startup torque (N・m)-0.4
  ・Allowable torque-1200rpm：0.55N・m(50Hz)、0.5N・m(60Hz)90rpm：0.12N・m(50/60Hz)

  Standard Price:	SGD 378.96
  Days to Ship:	8 Day(s) or more

Loading...