Hot Air Generators（Power Supply：Single-phase 200V）

• 

  Hot Air Generating Units-Standard Type

  MISUMI

  This is a hot air generating unit. [Power Supply Frequency]For 50/60 Hz

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,223.70
  Days to Ship:	8 Day(s) or more

• 

  Small Hot Air Generator

  KASHIMA

  High-Temperature Fluid Heater
  High-temperature heating of gases such as air, up to 800°C. A revolutionary high temperature hot air generator that changes the heating area of gas burners, etc. A safe and clean hot air generator more compact than the conventional products, providing quick temperature rise/fall and excellent responsiveness.
  [Features]
  · Discharges high temperature in a short time.
  · Unlike the conventional hot air generators, the gas generator is separate and the heater is extremely compact.
  · Incredibly safe and clean because it does not combust or produce flames.
  · Temperature can be adjusted through three factors: voltage, air volume, and distance from workpiece.
  · The heat source supports ceramic machining of special elements with quartz glass. A heater with very little heat load has thus been realized.
  · Highly heat resistant quartz glass is used for the hot air vent.
  · Three types are available to suit the shape and mounting methods of items being heated.
  · By combining with a temperature controller, the blowing direction of hot air can be set as desired.
  · Non-standard shapes, voltages, and capacities are available, as are irregular shapes.
  [Notes]
  · Be sure to check ventilation when applying voltage. Never use without ventilation.
  · After turning the power to the product off, wait at least 3 minutes before turning off the ventilation for safety. After that, confirm that the temperature of the hot air is 50°C or less and stop the air blow.
  · The main body uses quartz glass, so do not apply impacts.
  · When using, the main body and case will become hot, so never touch with bare hands. Burns may result.

  Standard Price:	SGD 339.16-
  Days to Ship:	4 Day(s) or more

• 

  Compact Hot Air Heater SAH Series (Standard Output Type)

  TOHOKUDENSHI

  Can be used freely from room temperature to high temperature ranges (maximum 800°C).
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 351.30-
  Days to Ship:	10 Day(s) or more

• 

  Small Hot Air Generators

  MISUMI

  [Features]·The standard has been changed. The overall length is shorter than before.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 417.78-
  Days to Ship:	6 Day(s) or more

• 

  Hot Air-Blow Gun

  SAKAGUCHI

  Various types of hand-held hot air guns made by the German company, Steinel, are available.
  [Features]
  · Use of high-efficiency Honeycomb type heating element results in excellent cost-effectiveness.
  · The built-in temperature fuse prevents excessive heating.

  Standard Price:	SGD 299.50-
  Days to Ship:	10 Day(s) or more

• 

  Non-frame Torch

  SAKAGUCHI

  A hot air generator that can output hot air of 800°C even at low power. Fast start-up and easy temperature control. Able to stably supply fluid at the desired operating temperature.

  Standard Price:	SGD 683.32
  Days to Ship:	4 Day(s) or more

• 

  Micro Cable Air Heater

  SAKAGUCHI

  A highly efficient hot air generator that provides speedy temperature increases. The special internal structure drastically reduces the surface temperature of the pipe body, eliminating the need for heat insulating materials or cooling. An energy saving type of heater that reduces power consumption by approximately 15%. (Note: Compared to our conventional products)

  Standard Price:	SGD 2,993.87
  Days to Ship:	7 Day(s) or more

Loading...