3 Million Products, 1000 Brands.

20,000 Stock items same day Ship Out Products.

Search by
Category, Brand

Search by Category
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Material Handling & Storage
Safety & General Supplies
Lab & Clean Room Supplies
Press Die Components
Plastic Mold Components

Brand Search
Brand List
Need Help?

Laser Holders

Days to Ship
  • ALL
  • 8 Day(s) or Less
  • Laser Holder Round

    Laser Holder Round

    SURUGA SEIKI

    [Features] - F20 holds the laser between three screws and the light axis is adjusted by turning the screws in and out. - For F21, in addition to the F20 functions, it is possible to adjust the θγ direction by operating the screws on the lower portion of the holder. - For both the F20 and F21, there are the two types of L = 150 and 250 according to the laser length. - The standard rod that is included is ø 20 and L = 60 but it is possible to change both the rod diameter and length as desired. - The laser holder section can be fixed to a position 50mm shifted from the gap by removing the fixation screw from the under side (F20-150 and 250 only). - For F20, the rod can be removed and mounted directly on the breadboard (A65).

    CAD
    2D3D
    Days to Ship
    8 Day(s)
  • Water-cooled Adapter

    Water-cooled Adapter

    SURUGA SEIKI

    [Features] - A water cooling adapter for use with LD holders F125/F126/F127. - Better temperature stability and lower temperature control are possible by connecting to the low-temperature circulating water bed. - Please connect by using a 1/4 inch hose (the hose is not included)

    CAD
    2D3D
    Days to Ship
    8 Day(s)
  • Sensor / Laser Holders

    Sensor / Laser Holders

    SURUGA SEIKI

    [Features] - Tilt adjustments for the small sensor and laser point. - Please feel free to use for the mounting of various adapter plates as P.C.D.32 tapping holes are drilled onto the holder surface.

    CAD
    2D3D
    Days to Ship
    8 Day(s)
  • LD Holders (To-Package Model)

    LD Holders (To-Package Model)

    SURUGA SEIKI

    [Features] - To-Package type LD holder with Peltier element. - Uses embedded Peltier element to equip the calibrated 10 kΩ thermistor sensor - LD sizes ø 5.6 (pin PCD, 2.0) and ø 9.0 (pin PCD, 2.54) respectively support 3-pin and 4-pin. - The anode common and cathode common are set by switching the jumper pins. - For the connector, D-sub9 pin female is used for LD drive and D-sub9 pin male is used for the temperature controller. - Water cooling adapter F129-1 is also available. - Stability and low-temperatures are possible by using the low-temperature circulating water tank.

    CAD
    2D3D
    Days to Ship
    8 Day(s)
  • LD Holder

    LD Holder

    SURUGA SEIKI

    F511L: Stationary type. F512L and F513L: The LD holder has an adjustable YZ axis. Please make a selection in accordance with the LD number of pins and pin pitch (pin P.C.D).

    CAD
    2D3D
    Days to Ship
    8 Day(s)
  • LD Holders (Chip Carrier Model)

    LD Holders (Chip Carrier Model)

    SURUGA SEIKI

    [Features] - LD holder for the Chip Carrier type with Peltier element embedded. - Uses embedded Peltier element to equip the calibrated 10 kΩ thermistor sensor. - The LD anode and cathode switch can be set by switching the jumper pins. - There are two types of Chip Carrier type LD holders. These are set by mounting the LD (radiation direction). - For the connector, D-sub9 pin female is used for LD drive and D-sub9 pin male is used for the temperature controller. - Water cooling adapter F129-1 is also available. - Stability and low-temperatures are possible by using the low-temperature circulating water tank.

    CAD
    2D3D
    Days to Ship
    8 Day(s)

Configure

Clear All

Brands

Brand

MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close