Standard Linear Guides（Page2）

• 

  [Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type

  THK

  An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

  CAD ：

  2D / 3D

  Standard Price:	SGD 73.37-
  Days to Ship:	4 Day(s) or more

• 

  Linear Guides for Medium Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload

  MISUMI

  Linear Guides for Medium Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 100 and 1480
  ● Assembly Height (mm.): 24, 28 and 33
  ● Rail Type : Standard Rail
  ● Option: Set (Rail + Block) / Block only or Rail only
  ● Material: Stainless Steel (SUS440C Equivalent) 57HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Miniature Linear Guides - Wide Rails - Long Blocks, Light Preload

  MISUMI

  Miniature Linear Guides - Wide Rails - Long Blocks, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 80 and 670
  ● Assembly Height (mm.): 9, 12, 14, and 16
  ● Accuracy Standards : Standard Grade, High Grade and Precision Grade
  ● Block Type : Long Block
  ● Rail Type : Wide Rail
  ● Material: Stainless Steel 56HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload

  MISUMI

  Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 220 and 1960
  ● Assembly Height (mm.): 30, 36, and 42
  ● Block Type : Standard Block or Wide Block with Tapped Holes
  ● Option: Set (Rail + Block) / Block only or Rail only
  ● Material: Carbon Steel 58HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  [Single Rail] Caged Ball LM Guide, International Standard, SHS Type

  THK

  [Single Rail] Caged Ball LM Guide, International Standard, SHS Type
  These rails are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length (mm.) : The size is configurable between 73 to 2920 mm, and the minimum length can be increased by increments 1 mm.
  ● Rail Type : Standard
  ● Rail Mounting Hole Pitch (mm.) : 60 and 80
  ● Rail Mounting Hole Diameter (mm.) : 4.5, 6, 7 and 9
  [Application]
  It is used in a THK LM Guide SHS Type
  

  CAD ：

  2D

  Days to Ship:	6 Day(s) or more

• 

  Linear Guides for Heavy Load - With Plastic Retainers, Interchangeable, Light Preload

  MISUMI

  Linear Guides for Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 100 and 1960
  ● Assembly Height (mm.): 24, 28, 33 and 42
  ● Block Type : Standard Block or Wide Block Tapped Hole
  ● Option: Set (Rail + Block) / Block only
  ● Material: Carbon Steel 56HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Miniature Full-Ball Type LM Guide SRS-G Type

  THK

  A full-ball type with not ball retainer on the SRS type.
  
  [Features]
  · The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
  · The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
  · The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
  · The LM block and LM rail both use stainless steel that are highly rust-proof.
  · The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
  · This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  [Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type

  THK

  A best selling THK product. The SHS series can be used in any position.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  [Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type

  THK

  An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
  ·
  · Cross-section

  CAD ：

  2D / 3D

  Standard Price:	SGD 73.37-
  Days to Ship:	4 Day(s) or more

• 

  Full-Ball Type LM Guide, International Standard, HSR Type

  THK

  A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Full-Ball Type LM Guide Wide Rail HRW Type

  THK

  A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
  There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  [Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type

  THK

  An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
  · , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 66.53-
  Days to Ship:	4 Day(s) or more

• 

  [Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  CAD ：

  2D

  Days to Ship:	6 Day(s) or more

• 

  Caged Ball LM Guide, International Standard, SHS Type

  THK

  A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Miniature Eco Guide (EGM, EGM-L Series)

  OZAK

  [Features]
  ・ Since all parts are composed of stainless steel and plastic, it is ideal under operating environments where rust should be avoided
  ・ The minimum allowable compact design and weight reduction have been designed, making it ideal for high-speed operation
  ・ The ball rolling surface is designed in a gothic arch shape that can receive high load capacity, so it maintains a long lifespan
  ・ Lubrication holes are provided on both sides of the bearing carriage to simplify maintenance. It is recommended to supply grease regularly

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks, Light Preload

  MISUMI

  Miniature Linear Guides - Heat Resistant - Short / Standard / Long Blocks, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 35 and 630
  ● Assembly Height (mm.): 8, 10, 13 and 16
  ● Block Type : Standard Block, Short / Long Block
  ● Material: Stainless Steel 56HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Full-Ball Type LM Guide, Radial Type, SR Model

  THK

  A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
  · The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
  · It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
  · LM block, LM rail, and LM rail are all compatible with stainless steel.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload

  MISUMI

  Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 100 and 1960
  ● Assembly Height (mm.): 24, 28, 33, and 42
  ● Rail Type : Standard Rail
  ● Option: Set (Rail + Block) / Block only or Rail only
  ● Material: Carbon Steel 58HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Ball LM guide, radial type, SR-M1 type

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

  CAD ：

  2D

  Days to Ship:	34 Day(s) or more

• 

  [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model

  THK

  [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
  These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Block Type : Wide Block
  ● Applicable for Rail Type : Wide Rail
  ● Accuracy Grade : Standard Grade
  ● Number of Block Mounting Holes : 4 or 6
  ● Mounting Hole Dimension : M5, M6 and M8
  ● Material: Carbon Steel and Stainless Steel
  [Application]
  It is used in a THK LM Guide HRW Series.
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 247.00-
  Days to Ship:	4 Day(s) or more

• 

  Wide Miniature Eco Guide (EGM-W, EGM-WL Series)

  OZAK

  [Features]
  ・ Since all parts are composed of stainless steel and plastic, it is ideal under operating environments where rust should be avoided
  ・ The minimum allowable compact design and weight reduction have been designed, making it ideal for high-speed operation
  ・ The ball rolling surface is designed in a gothic arch shape that can receive high load capacity, so it maintains a long lifespan
  ・ Lubrication holes are provided on both sides of the bearing carriage to simplify maintenance. It is recommended to supply grease regularly

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Linear Guideway BR Series (Flanged Type)

  ABBA Linear tec

  [Features]
  · Unlubricated system built-in, four-directional load design, new steel ball re-circulation system for smooth movement
  · High-rigidity 4-row, 45-degree contact
  · International standard size
  · High precision, low friction coefficient
  · Low maintenance costs
  · High movement speed, low noise
  · Oil-sealed type
  · Designed for interchangeability
  [Notes] The reference plane is on the polished side of the block.
  [Preload] No preload, light preload, medium preload
  [Accuracy class] Normal, high, precision
  [Dustproofing] Fully sealed
  [Materials] Steel
  [Lubrication] No lubrication system

  Days to Ship:	14 Day(s) or more

• 

  Linear Guides for Heavy Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload

  MISUMI

  Linear Guides for Heavy Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 100 and 1480
  ● Assembly Height (mm.): 24, 28 and 33
  ● Block Type : Standard Block
  ● Rail Type : Standard Rail
  ● Option: Set (Rail + Block) Block only
  ● Material: Stainless Steel SUS440C Equivalent 57HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Linear Guides for Super Heavy Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload

  MISUMI

  Linear Guides for Super Heavy Load - Stainless Steel - With Plastic Retainers, Interchangeable, Light Preload
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 220 and 1480
  ● Assembly Height (mm.): 30 and 40
  ● Block Type : Standard Block
  ● Material: Stainless Steel (SUS440C Equivalent) 57HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Full-Ball Type LM Guide for High Temperatures Model HSR-M1

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
  · The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
  · Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
  · A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
  · The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
  · Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

  CAD ：

  2D

  Days to Ship:	83 Day(s) or more

• 

  LM guide with Ball retainer - Limited stroke EPF type

  THK

  A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.

  CAD ：

  2D / 3D

  Days to Ship:	23 Day(s) or more

• 

  [Single Rail] Full-Ball Type LM Guide, Radial Type, SR Type

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · Palm of the two shafts

  CAD ：

  2D

  Days to Ship:	6 Day(s) or more

• 

  C-Lube Linear Way H MH Series

  IKO

  A linear guiding device with high rigidity that includes large diameter steel balls in order to achieve good balance and a high load capacity.
  
  [Features]
  · A high rigidity series that has the highest rated load for the ball type
  · Wide variation that responds to needs
  · A stainless steel line up with excellent corrosion resistance
  · A series that has dust-proof specifications that demonstrate excellent dust performance.
  

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Compact S Type Economy Guide (EGS-S)

  OZAK

  [Features]
  ・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
  ・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
  ・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
  ・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
  ・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
  ・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
  ・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Linear Guides for Heavy Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance

  MISUMI

  Linear Guides for Heavy Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 160 and 1960
  ● Assembly Height (mm.): 24, 28, and 33
  ● Block Type : Standard Block or Wide Block
  ● Material: Carbon Steel 58HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance

  MISUMI

  Linear Guides for Medium/Heavy Load - With Dowel Holes, Normal Clearance
  These linear guides or linear slide are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 100 and 1960
  ● Assembly Height (mm.): 24, 28, and 33
  ● Block Type : Block with Dowel holes
  ● Material: Carbon Steel 58HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  [Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type

  THK

  [Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type
  These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Block Type : Wide Block
  ● Applicable for Rail Type : Wide Rail
  ● Accuracy Grade : Standard Grade
  ● Number of Block Mounting Holes : 4 or 6
  ● Mounting Hole Dimension : M4, M5, M6 and M8
  ● Material: Carbon Steel
  [Application]
  It is used in a THK LM Guide SHW Series.
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 234.26-
  Days to Ship:	4 Day(s) or more

• 

  Linear Way E LWE Series

  IKO

  Aiming for compactness on all sides. A universal type linear motion guiding device that has high versatility.
  
  [Features]
  · A universal series that is compact and has high versatility
  · Wide variation that responds to needs
  · A stainless steel line up with excellent corrosion resistance
  · A low noise linear way E that achieves smooth and quiet work
  

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  H Type Economy Guide With Flange (EGH-F, EGH-FL)

  OZAK

  [Features]
  ・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
  ・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
  ・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
  ・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
  ・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
  ・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
  ・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Linear Guides for Medium Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance

  MISUMI

  Linear Guides for Medium Load - Dust Resistant - With Double Seals / Metal Scrapers, Normal Clearance
  These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length Minimum/Maximum (mm.): 160 and 1960
  ● Assembly Height (mm.): 24, 28, and 33
  ● Block Type : Standard and Wide Block
  ● Material: Carbon Steel 58HRC
  [Application]
  It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Caged Ball LM Guide Low Floor Wide Rail SHW Type

  THK

  A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
  · The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
  · Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
  · The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  [Single Rail] Caged Ball LM Guide, Radial Type, SSR Type

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  CAD ：

  2D

  Days to Ship:	6 Day(s) or more

• 

  Linear Rail System SBI-SL/SLL Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Linear Rail System SBI-HL/HLL Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Linear Rail System SBI-SV Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  H Type Economy Guide (EGH, EGH-L)

  OZAK

  [Features]
  ・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
  ・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
  ・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
  ・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
  ・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
  ・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
  ・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Linear Rail System SBI-CL/CLL Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  S Type Eco Guide (EGS Series)

  OZAK

  [Features]
  ・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
  ・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
  ・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
  ・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
  ・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
  ・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
  ・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  [Single Rail] Full-Ball Type LM Guide, Wide Rail, HRW Type

  THK

  Started selling rails separately, in response to requests. The rail length can be designated at units of 1 mm.
  
  [Features]
  · LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the ball retainer and LM block circulate the rows of balls.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  [Rail only]Ball retainer with LM Guide Wide rail SHW form

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

Loading...