ORIENTAL MOTOR Small AC Motors

• 

  Induction Motor, K Series

  ORIENTAL MOTOR

  - Induction Motor, K Series from ORIENTAL MOTOR.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - These models provide high cost performance with the same functions as K Series models that conform to global power supply voltages.
  - The product lineup includes models with output power from 1 W to 150 W.
  

  Standard Price:	SGD 107.00-
  Days to Ship:	Same day or more

• 

  Torque Motor Unit, TM Series

  ORIENTAL MOTOR

  Ideal for winding and pressing mechanism
  
  [Features]
  ・ You can easily set and adjust the motor torque using the internal torque setting device of the power controller, etc.
  ・ Torque settings can be selected using 3 different methods to match how the product is used. Two-stage torque setting is possible by switching internal/external
  ・ The variation of the generated torque with respect to the torque setting value is smaller than that of the conventional torque motor with power controller
  ·It can be used separating the motor and power controller up to 20 m. It can also be used even when the motor installation location and the control panel are separated
  ・ The connection terminals of the power controller are separated top-and-bottom in the control system and motive system, which allows for clean wiring. It can also be directly mounted on the DIN rail

  Standard Price:	SGD 362.00-
  Days to Ship:	12 Day(s)

• 

  Parallel Shaft Gearhead for Induction Motor, World K2 Series

  ORIENTAL MOTOR

  - Parallel Shaft Gearheads, World K series from ORIENTAL MOTOR.
  - Easy Speed Reduction and Torque Increase, Combination with a gearhead allows the motor to slow down to a required speed and generate higher torque.
  - Wide Variety of Products Gearheads are available with 20 different gear ratios from 1:3 to 1:180. Using a decimal gearhead also allows for large gear ratios of 1:180 or more.
  - Rated life of gear head is up to 5000 hours.
  

  Standard Price:	SGD 88.00-
  Days to Ship:	Same day or more

• 

  Speed Control Motor, Induction Type, K Series

  ORIENTAL MOTOR

  - Speed Control Motor, Induction Type, K Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 60 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature −10 to +40 °C (+14 to +104 °F) (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Standard Price:	SGD 141.00-
  Days to Ship:	17 Day(s)

• 

  Motor for AC Speed Control Unit

  ORIENTAL MOTOR

  - Motor for AC Speed Control Unit from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, 110 VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC, specifications as well as output power of 6 to 90 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Wide Variety of Products Gearheads are available with 26 different gear ratios from 1:2 to 1:360.
  

  Standard Price:	SGD 144.00-
  Days to Ship:	12 Day(s) or more

• 

  Induction Motor, World K2 Series

  ORIENTAL MOTOR

  Compliant with international safety standards, compatible with global voltages
  
  [Features]
  · Compliant with international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Standard Price:	SGD 117.00-
  Days to Ship:	Same day or more

• 

  LH Linear Head, □L Type

  ORIENTAL MOTOR

  - LH Linear Head from ORIENTAL MOTOR.
  - The LH Series of linear heads with a rack-and-pinion mechanism are coupled with standard AC compact motors. They easily produce linear motion such as pressing and reversing.
  - A wide variety of linear heads are available, depending on basic speed, length of rack, maximum transportable mass, direction of rack movement in respect to the mounting face etc.
  - Basic speed is based on synchronous speed (1800 r/min at 60Hz). The actual speed varies with the load or power supply frequency.
  

  Standard Price:	SGD 351.00-
  Days to Ship:	17 Day(s)

• 

  Unit Type Speed Control Motor, US Series, Single Motor

  ORIENTAL MOTOR

  - Unit Type Speed Control Motor, US Series, Single Motor from ORIENTAL MOTOR.
  - The US Series is a panel mounted control unit and speed control motor package.
  - Wiring is performed through an easy connection method utilizing connectors.
  - This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
  - The instantaneous stop function is not available.
  

  Standard Price:	SGD 149.00-
  Days to Ship:	Same day or more

• 

  Induction Motors, World K2 Series for Asia

  ORIENTAL MOTOR

  - Induction motor, World K series from ORIENTAL MOTOR.
  - Suitable for applications where the motor is operated continuously in one direction.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - A lineup that includes single-phase 110 VAC, single-phase 220/230 VAC, and three-phase 200/220 VAC specifications as well as output power of 6 to 90 W is provided.
  - All World K Series models have a built-in overheat protection device and conform to various safety standards.
  - Twice the Motor Bearing Life (Compared with a conventional model)
  

  Standard Price:	SGD 103.00-
  Days to Ship:	4 Day(s) or more

• 

  Parallel Shaft GU-K Gearhead for Compact AC Motors (Flange Mounted Type)

  ORIENTAL MOTOR

  Gearhead that converts number of rotations or torque to the required values
  
  [Features]
  · Type with mounting flange attached to gearhead.
  · Can be incorporated into equipment after first fixing the motor and gearhead

  Standard Price:	SGD 212.00-
  Days to Ship:	12 Day(s)

• 

  GN Parallel Shaft Gearheads for World K2 Series for Asia

  ORIENTAL MOTOR

  - Parallel Shaft Gearheads, GN Series from ORIENTAL MOTOR.
  - GN type pinion applicable with motor capacity from 6W to 40W.
  - Easy Speed Reduction and Torque Increase, Combination with a gearhead allows the motor to slow down to a required speed and generate higher torque.
  - Wide Variety of Products Gearheads are available with 20 different gear ratios from 1:3 to 1:180. Using a decimal gearhead also allows for large gear ratios of 1:180 or more.
  - Rated life of gear head is up to 5000 hours.
  

  Standard Price:	SGD 88.00-
  Days to Ship:	4 Day(s) or more

• 

  Orthogonal Shaft Solid and Hollow Gearheads for Small AC Motors

  ORIENTAL MOTOR

  - Right-Angle Gearheads for Small AC Motors from ORIENTAL MOTOR.
  - Right-angle gearheads are flange-mounted gearheads that use worm gears and special helical gears.
  - Ideal for Space Saving, the motor is perpendicular to the load shaft, enabling space saving.
  - With hollow shaft gearheads, the parts cost and labor will decrease since no connecting parts are needed.
  - A wide variety of gear ratios (20 types, from 3 to 180) are available. The optimal gear ratio can be selected in the same manner as with parallel shaft gearheads.
  

  Standard Price:	SGD 167.00-
  Days to Ship:	17 Day(s)

• 

  Induction Motor, KII Series

  ORIENTAL MOTOR

  [Features]
  ・ Ideal for one-way, continuous operation
  ・ You can drive easily
  ・ Excellent motor performance
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with a low profile terminal box (Type with terminal box)
  ・ Gearhead design points
  ・ Equipped with high-performance gearhead

  Standard Price:	SGD 112.00-
  Days to Ship:	17 Day(s)

• 

  Brake Pack, Single Unit

  ORIENTAL MOTOR

  Control circuit for instant stopping that can rapidly stop induction motors, reversible motors, and motors with electromagnetic brakes.
  
  [Features]
  · Instantly stops the motor with an electronic brake.
  · Has major braking power for stopping in about 0.1 seconds for an individual motor, with the overrun volume staying at 1 to 1.5 rotations or less.
  · A braking current flows into the motor for about 0.4 seconds, but afterwards the motor is automatically cut off from the power supply.
  · It is an electronic brake triggered by a current, so unlike a mechanical electromagnetic brake it has no parts subject to wear, which gives it long life.
  · Optimal for applications such as motor inching (dimensions) operation, etc.
  · SB50W power relay is not required for non-contact types.
  · Has simple wire connections, which helps cut down on the number of times maintenance is needed.
  · It is an electronic brake triggered by a current, so unlike a mechanical electromagnetic brake it has no parts subject to wear, which gives it long life.
  · Optimal for applications such as motor inching (dimensions) operation, etc.
  · SB50W power relay is not required for non-contact types.
  · Has simple wire connections, which helps cut down on the number of times maintenance is needed.
  · SB50W when used in combination with a motor with electromagnetic brakes, couples electronic brakes and electromagnetic brakes together, and so allows the motors to retain the load after instant braking.
  · Optimal for applications that require load retention after instant braking

  Standard Price:	SGD 133.00-
  Days to Ship:	Same day or more

• 

  Speed Control Motor, SS21 Type / SS31 Type

  ORIENTAL MOTOR

  [Features]
  "SS21 type"
  Combined with a 6 W to 40 W speed control motor, speed control, instant stop, slow start / slow down (-SSSD type) are possible.
  "SS31 type"
  Combined with a 60 W high output speed control motor, speed control, instant stop, slow start / slow down (-SSSD type) are possible.

  Standard Price:	SGD 174.00-
  Days to Ship:	51 Day(s) or more

• 

  Speed Control Motor Unit, MSD Series

  ORIENTAL MOTOR

  [Features]
  ・ Compact non-contact speed control unit with tachometer and speed control motor unit
  ・ Two types of control packs are available depending on the mounting method
  ・ Please use the DIN rail mounting for installation in the switchboard, and the recessed mounting for mounting on the panel for external display
  ・ Compact and easy to operate
  ・ Built-in digital tachometer, accurate rotational speed setting

  Standard Price:	SGD 401.00-
  Days to Ship:	17 Day(s)

• 

  Parallel Shaft GU-KB Gearhead (Enclosure-Shape Type) for Compact AC Motor

  ORIENTAL MOTOR

  Gearhead that converts number of rotations or torque to the required values

  Standard Price:	SGD 212.00-
  Days to Ship:	12 Day(s)

• 

  Unit-Type Speed Control Motor US Series

  ORIENTAL MOTOR

  - Unit-Type Speed Control Motor US Series from ORIENTAL MOTOR.
  - The US Series is a panel mounted control unit and speed control motor package.
  - Wiring is performed through an easy connection method utilizing connectors.
  - This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
  - The instantaneous stop function is not available.
  

  Standard Price:	SGD 162.00-
  Days to Ship:	12 Day(s)

• 

  Reversible Motor, KII Series

  ORIENTAL MOTOR

  [Features]
  ・ Ideal for one-way, continuous operation
  ・ You can drive easily
  ・ Excellent motor performance
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with a low profile terminal box (Type with terminal box)
  ・ Gearhead design points
  ・ Equipped with high-performance gearhead

  Standard Price:	SGD 120.00-
  Days to Ship:	17 Day(s)

• 

  Single-Unit Motor with Electromagnetic Brake, World K2 Series

  ORIENTAL MOTOR

  Compatible with global voltages
  
  [Features]
  · Compliant with international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Standard Price:	SGD 276.00-
  Days to Ship:	12 Day(s)

• 

  Torque Motor K Series/World K Series, Individual Motor

  ORIENTAL MOTOR

  Optimal for applications that require torque adjustments, such as winding, presser applications, etc.
  
  [Features]
  · Torque motor that conforms to international safety standards (excluding 40W).
  · Motor rotation speed and torque can be adjusted by installing an external voltage adjuster.
  · Torque motor unit TM series that combines with a power controller that is capable of easily adjusting torque is also available

  Standard Price:	SGD 162.00-
  Days to Ship:	17 Day(s)

• 

  Speed Control Motor, Reversible Type, K Series

  ORIENTAL MOTOR

  - Speed Control Motor, Reversible Type, K Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 40 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature −10 to +50 °C (+14 to +122 °F) (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Standard Price:	SGD 149.00-
  Days to Ship:	17 Day(s)

• 

  AC Speed Control Motor, US2 Series

  ORIENTAL MOTOR

  [Features]
  ・ Highly reliable closed-loop control speed control motor unit
  ・ Intuitive operation just by turning the dial to set the desired value and pressing the dial
  ・ Built-in capacitor, simple connection
  ・ Equipped with digital display

  Standard Price:	SGD 262.00-
  Days to Ship:	12 Day(s)

• 

  AC Motor, KIIS Series

  ORIENTAL MOTOR

  [Features]
  ・ Highly efficient and highly characteristic three-phase motor with optimal design
  ・ Achieves the best characteristics in combination with an inverter
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with stainless steel shaft as standard
  ・ Compatible with H1 grease for food machine
  ・ Compact and lightweight
  ・ Low profile terminal box (Type with terminal box)
  ・ International standards (UL/CSA standard, CCC system, CE marking)

  Standard Price:	SGD 180.00-
  Days to Ship:	12 Day(s) or more

• 

  Geared Motor, Dust-Proof and Waterproof Type, FPW Series

  ORIENTAL MOTOR

  4 types of output: 25W, 40W, 60W and 90W
  
  [Features]
  · Geared motor certified by UL as conforming to IEC standard IP67.
  · Appropriate for use in places where water splashed or that are washed regularly.
  · Waterproof type geared motor that can be used in areas affected by moisture.
  · IEC standard IP67-compliant.
  · Not suitable for underwater or high water pressure environments.
  · Uses special coating and updated shaft materials [stainless steel (SUS303 type)] for improved corrosion resistance.
  · Designed and structured to be dust-proof and waterproof.
  · UL/CSA standards certified. CE marking (low voltage directive) compliant.
  · Also, Chinese compulsory product authorization system (CCC system) certified

  Standard Price:	SGD 444.00-
  Days to Ship:	4 Day(s) or more

• 

  Electromagnetic Brake Motors, World K2 Series for Asia

  ORIENTAL MOTOR

  - Electromagnetic Brake motor, World K series from ORIENTAL MOTOR.
  - Suitable for applications in which the load must be held.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - A lineup that includes single-phase 110 VAC, single-phase 220/230 VAC, and three-phase 200/220 VAC specifications as well as output power of 6 to 90 W is provided.
  - All World K Series models have a built-in overheat protection device and conform to various safety standards.
  - Twice the Motor Bearing Life (Compared with a conventional model)
  

  Standard Price:	SGD 243.00-
  Days to Ship:	4 Day(s) or more

• 

  Parallel Shaft GN-S Gearhead for Compact AC Motors

  ORIENTAL MOTOR

  [Features]
  · Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
  · Abundant product lineup of parallel shaft gearheads available.

  Standard Price:	SGD 122.00-
  Days to Ship:	Same day or more

• 

  Parallel Shaft GN-K Gearhead for World K2 Series

  ORIENTAL MOTOR

  Gearhead that converts rotation speed and torque to the required values
  
  [Features]
  · Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
  · Abundant product lineup of parallel shaft gearheads available.

  Standard Price:	SGD 143.00-
  Days to Ship:	12 Day(s)

• 

  Parallel Shaft Gearheads, New GE Series ( For ASIA )

  ORIENTAL MOTOR

  - Parallel Shaft Gearheads, New GE Series from ORIENTAL MOTOR.
  - GE type pinion applicable with motor capacity from 60 W to 90 W.
  - Easy Speed Reduction and Torque Increase, Combination with a gearhead allows the motor to slow down to a required speed and generate higher torque.
  - Wide Variety of Products Gearheads are available with 20 different gear ratios from 1:3 to 1:180. Using a decimal gearhead also allows for large gear ratios of 1:180 or more.
  - Rated life of gear head is up to 5000 hours.
  

  Standard Price:	SGD 178.00-
  Days to Ship:	4 Day(s) or more

• 

  Individual C and B Motor

  ORIENTAL MOTOR

  Compared with other AC small standard motors, the C and B motor can start and stop more quickly, and has excellent responsiveness. Appropriate for one-direction applications that continuously and frequently start and stop.
  
  [Features]
  · High-accuracy, high-response clutch and brake enable high-frequency starts and stops.
  · No-contact control of the clutch and brake operation is possible if a C and B controller (sold separately) is used.
  · Compact design for easy handling.
  · Drive parts can be clustered neatly together without taking up space.
  · The C and B motor GC dedicated gearhead and the GCH gearhead emphasize impact resistance, have been made stronger, have been specialized, and boast improved reliability (the GN gearhead and other gearheads cannot be mounted).
  · For induction motors, lead wire type, type with small terminal box, and speed control type are available.
  · Also, an abundant array of power supply specifications are available: single-phase 100V and 200V, and three-phase 200V

  Standard Price:	SGD 620.00-
  Days to Ship:	17 Day(s) or more

• 

  Gearhead Single Unit for Combination

  ORIENTAL MOTOR

  - Gearhead Single Unit for Combination from ORIENTAL MOTOR.
  - Wide Variety of Products Gearheads are available with 11 different gear ratios from 1:10 to 1:1200.
  - Gear head type can be selected in to 3 types, Parallel Shafts, Orthogonal Axes (Hollow Shaft), Orthogonal Axes (Solid Shaft).
  - The rotation direction can be selected both Reverse direction to the motor or Same direction as the motor.
  - Mounting flange size can be selected 60 mm to 110 mm.
  

  Standard Price:	SGD 194.00-
  Days to Ship:	4 Day(s) or more

• 

  Reversible Motors, World K2 Series for Asia

  ORIENTAL MOTOR

  - Reversible motor, World K series from ORIENTAL MOTOR.
  - Suitable for applications where the motor must frequently switch direction.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - A lineup that includes single-phase 110 VAC, single-phase 220/230 VAC, and three-phase 200/220 VAC specifications as well as output power of 6 to 90 W is provided.
  - All World K Series models have a built-in overheat protection device and conform to various safety standards.
  - Twice the Motor Bearing Life (Compared with a conventional model)
  

  Standard Price:	SGD 111.00-
  Days to Ship:	4 Day(s) or more

• 

  AC Speed Control Motor, DSC Series

  ORIENTAL MOTOR

  Easy speed control motor with full functionality.
  A speed control motor with excellent cost performance that is reasonably priced and sized.
  [Features]
  ・ Speed control with closed loop control
  ・ Space saving and reduction of installation effort
  ・ Full functionality in a small body
  ・ High reliability
  ・ Vertical drive is possible with an electromagnetic brake
  ・ Uses a gear head with excellent torque and strength
  ・ Motor and gearhead assembled
  ・ Achieves space saving and cost reduction

  Standard Price:	SGD 259.00-
  Days to Ship:	12 Day(s)

• 

  Induction Motor, World K Series (RoHS Non-Compliant)

  ORIENTAL MOTOR

  Induction motor with thermal protector for signals 25 W, 40 W, 60 W, 90 W Lead wire type, type with terminal box.
  [Features]
  ・ Built-in thermal protector for signals
  ・ Global voltage compatible
  ・ CE marking

  Standard Price:	SGD 148.00-
  Days to Ship:	17 Day(s) or more

• 

  Induction Motor With Switch Enclosure UB Series

  ORIENTAL MOTOR

  - Induction Motor with Switch Enclosure UB Series from ORIENTAL MOTOR.
  - Switch enclosure with built-in capacitors and switches.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, and three-phase 200 VAC specifications as well as output power of 5.5 to 90 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Overheat protection device type can be selected Impedance protection or Thermal protector.
  

  Standard Price:	SGD 115.00-
  Days to Ship:	61 Day(s)

• 

  Combined Use Parallel Shaft Gear Head Single Unit KII Series GV Type

  ORIENTAL MOTOR

  - Gear Head Single Unit KII Series GV Type from ORIENTAL MOTOR.
  - Wide Variety of Products Gearheads are available with 21 different gear ratios from 1:5 to 1:360.
  - The lineup includes GV series, GVH series and GVR series.
  - The following items are included in each product. (Gearhead, Mounting Screws, Parallel Key, Operating Manual)
  - Applicable for 4 motor sizes, size 2 (flange 60 mm), size 3 (flange 70 mm), size 4 (flange 80 mm), and 5 (flange 90 mm).
  

  Standard Price:	SGD 135.00-
  Days to Ship:	12 Day(s)

• 

  Parallel Shaft Intermediate Gearheads

  ORIENTAL MOTOR

  Middle gear head.
  
  [Features]
  · Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
  · Abundant product lineup of parallel shaft gearheads available.

  Standard Price:	SGD 101.00-
  Days to Ship:	12 Day(s) or more

• 

  Single Unit Reversible Motor, World K2 Series

  ORIENTAL MOTOR

  Individual motor product from the world K series usable in Japan and throughout the world.
  
  [Features]
  · Conforms to international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Standard Price:	SGD 126.00-
  Days to Ship:	12 Day(s)

• 

  Unit-Type Speed Control Motor US Series of Overheat Protection Type

  ORIENTAL MOTOR

  Unit product consisting of board surface mounting type control unit and speed control motor. Single-touch connection just by connecting a connector. Optimal for applications where simple speed control is desired. (No instant stop function.)

  Standard Price:	SGD 317.00-
  Days to Ship:	Same day or more

• 

  High Power Induction Motor BH Series 200 W

  ORIENTAL MOTOR

  [Features]
  · Smallest size in its class but achieves 200W output.
  · Orthogonal shaft gearhead uses hypoid gears.
  · Lineup of hollow shafts and solid shafts is available to achieve space-saving.
  · Gearhead shaft has tapped hole machining that is convenient for connection to loads.

  Standard Price:	SGD 669.00-
  Days to Ship:	17 Day(s) or more

• 

  Parallel Shaft GCH Gearhead for C and B Motors

  ORIENTAL MOTOR

  - Parallel Shaft GCH Gearhead for C and B Motors from ORIENTAL MOTOR.
  - Suitable for High-frequency Operation, the combination of a constantly rotating induction motor and a clutch and brake unit enables high frequency starting and stopping.
  - Compact and Easy to Handle, the compact design simplifies handling and enables the drive unit of the machine to be mounted into a small area.
  - GCH type gearhead is specifically designed for C•B motors and boasts excellent impact resistance, greater strength, and high reliability.
  - GCH is designed for use with GCH-type pinion shaft motor.
  

  Standard Price:	SGD 201.00-
  Days to Ship:	17 Day(s)

• 

  Speed Control MotorInduction TypeSingle Unit Motor

  ORIENTAL MOTOR

  - Speed Control Motor, Induction Type, Single Unit Motor, MSS series from ORIENTAL MOTOR.
  - This product is a compact no-contact speed control motor, with 3W and 42 mm mounting angle.
  - The shape end of shaft has 2 types available, round shaft type for MSM003-003 and Pinion shaft type for MSM003-403.
  - Motor lead wire includes 5 stranded wires with 300 mm length (UL style 3266, AWG24).
  - The weight of the motor is 0.35 kg.
  

  Standard Price:	SGD 162.00
  Days to Ship:	12 Day(s)

• 

  Induction Motor, BH Series, Single-Unit Motor

  ORIENTAL MOTOR

  - Induction Motor, BH Series, Single-Unit Motor from ORIENTAL MOTOR.
  - Induction motors are optimal for uni-directional and continuous operation, such as a conveyor system.
  - Induction motors can be operated easily from an AC power supply.
  - These motors achieve a high output of 200 W (1/4 HP) with a frame size of 104 mm (4.09 inch).
  - With each combination type, the motor and gearhead come pre-assembled for easy installation into your equipment.
  

  Standard Price:	SGD 284.00-
  Days to Ship:	11 Day(s) or more

• 

  Speed Control Motor, World K2 Series

  ORIENTAL MOTOR

  - Speed Control Motor, World K2 Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, 110, VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC specifications as well as output power of 6 to 40 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature 0 to 50 °C (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Standard Price:	SGD 147.00-
  Days to Ship:	12 Day(s)

• 

  Parallel Shaft GC Gearhead for C and B Motors

  ORIENTAL MOTOR

  - Parallel Shaft GC Gearhead for C and B Motors from ORIENTAL MOTOR.
  - Suitable for High-frequency Operation, the combination of a constantly rotating induction motor and a clutch and brake unit enables high frequency starting and stopping.
  - Compact and Easy to Handle, the compact design simplifies handling and enables the drive unit of the machine to be mounted into a small area.
  - GC type gearhead is specifically designed for C•B motors and boasts excellent impact resistance, greater strength, and high reliability.
  - GC is designed for use with GC-type pinion shaft motor.
  

  Standard Price:	SGD 99.00-
  Days to Ship:	17 Day(s) or more

Loading...