MISUMI Jigs for Manual Tightening

• 

  Screw Jack (SJK)

  MISUMI

  Model SJK-K is provided with a through hole in the center of the jack allowing the jack to be fixed by a bolt, etc.
  No. E-175A attachment is usable for the SJK type.

  • Volume Discount

  Standard Price:	SGD 38.46-
  Days to Ship:	4 Day(s) or more

• 

  TAK Clamp (Eccentric Washer Cam Clamp)

  MISUMI

  [Features]
  ·Workpieces can be clamped simply by tightening bolts, so setup time can be reduced
  ·Load in table direction is applied to workpiece by action of tapered surface of washer, which suppresses lifting of workpiece

  • Volume Discount

  Standard Price:	SGD 14.98-
  Days to Ship:	4 Day(s) or more

• 

  Holding Clamp Set

  MISUMI

  Supplied with a hex bar wrench. Complete fastening with sliding mechanism.
  One-point attachment and detachment allow time reduction.
  For full surface machining of the work piece and perforating.
  Complete heat treatment allows semipermanent use. Floating prevention mechanism type.

  • Volume Discount

  Standard Price:	SGD 418.13-
  Days to Ship:	4 Day(s) or more

• 

  Clamp Support Screw Jack (CSJ)

  MISUMI

  Convenient for supporting various clamps.
  Allows connecting use of 2 or 3 in the case of one screw not being effective or lacking in height.
  Use of an attachment allows convenient support for deformed objects.

  • Volume Discount

  Standard Price:	SGD 50.10-
  Days to Ship:	Same day or more

• 

  High Lock Screw【1-5 Pieces Per Package】

  MISUMI

  [Features]
  ·Even if screw is turned, head that comes in contact with workpiece does not rotate, preventing damage to workpiece
  ·By inserting ball between head part and thread section, cutting force is transmitted to threaded part via ball, making it more difficult to loosen than conventional screws
  ·Tightening torque is directly converted into clamping force linearly, so fastening is stronger than conventional screws

  • Volume Discount

  Standard Price:	SGD 9.77-
  Days to Ship:	4 Day(s) or more

• 

  Injeck Clamp Q-model

  MISUMI

  Clamping with mold bases is easy. The clamp and step block are connected to prevent losing.
  Opening of the oblong hole allows easy attachment and detachment from the side.
  Can be adjusted to 4 different heights by changing the position of the step block of the main unit.

  • Volume Discount

  Standard Price:	SGD 80.33-
  Days to Ship:	4 Day(s) or more

• 

  Round Seat, Flat Model

  MISUMI

  [Features]
  ·Used for height adjustment of workpiece during machine finishing
  ·Since it is raw material, there is no damage to drill even if it interferes with round seat during drilling
  ·Materials: S45C (Unhardened steel)
  ·Height can be specified in 5 mm increments (Height tolerance within ±0.02)

  Days to Ship:	8 Day(s) or more

• 

  Round Seat, Counter Bores Mounted Model

  MISUMI

  [Features]
  ·Used for height adjustment of workpiece during machine finishing
  ·Can be fixed with bolts
  ·Since it is raw material, there is no damage to drill even if it interferes with round seat during drilling
  ·Materials: S45C (Unhardened steel)
  ·Height can be specified in 5 mm increments (Height tolerance within ±0.02)

  Days to Ship:	8 Day(s) or more

• 

  Toa Adjust Clamp【2 Pieces Per Package】

  MISUMI

  Ideal for clamping thin workpieces. Fastening the toe pressing downwardly allows to prevent the machining material from floating.
  Long-lasting use is possible because the tow is quenched.

  • Volume Discount

  Standard Price:	SGD 693.46-
  Days to Ship:	7 Day(s) or more

Loading...