Polishing Materials / Pastes

• 

  Diamond paste 1E00 series

  NORITAKE

  [Features]
  · Diamond abrasive grains with the same grain size and shape are carefully selected and uniformly dispersed in a paste state.
  · The desired finished surface, from coarse to mirror finish, can be achieved easily whether using hard or soft materials, and is useful for improving efficiency and quality precision.
  [Applications]
  · For finishing hard metals, non-ferrous metals, non-metals, etc.

  Standard Price:	SGD 69.30-
  Days to Ship:	9 Day(s) or more

• 

  Diluted Solution (for Diamond Compounds)

  YANASE

  [Features]
  · Essential for diamond paste.
  · It is used to dilute diamond paste.
  [Applications]
  · For diamond compounds.

  Standard Price:	SGD 24.75-
  Days to Ship:	4 Day(s) or more

• 

  Aluminum, Zinc, Copper, Brass Lime ST

  YANASE

  [Features]
  · Optimal for stainless steel.
  · A typical lime type polishing agent with a good balance between cutting and glazing, developed for medium finishing of hard metals (especially stainless steel).
  · Used buffs: Open sisal buff, bias cotton buff.
  [Applications]
  · Iron, stainless steel / aluminum, zinc.

  Standard Price:	SGD 8.31
  Days to Ship:	10 Day(s) or more

• 

  Glacerium

  YANASE

  [Features]
  · Removes small scratches that could not be removed with conventional abrasives.
  · Particularly effective against stubborn water stains.
  · Unlikely to leave polishing marks and can achieve high transparency.
  · Easy-to-use, highly pure, paste-form cerium oxide.
  

  Standard Price:	SGD 30.36-
  Days to Ship:	4 Day(s) or more

• 

  Polishing Agent for Resin

  TRUSCO NAKAYAMA

  [Features]
  · Leaves minimal swirls, making it also ideal for transparent resin.
  · For gloss finishing of resin (plastic, acrylic, celluloid, etc.).
  [Applications]
  · Gloss finishing of resin (plastic, acrylic, celluloid, etc.).
  · Apply onto a calico-finish buff, flannel-finish felt, or buff series to use.

  Standard Price:	SGD 27.70
  Days to Ship:	7 Day(s)

• 

  Metal Mold Finishing Oil

  TRUSCO NAKAYAMA

  [Features]
  · Low-volatility oil dedicated for mold surface finishing.
  · Low viscosity insoluble oil helps disperse chippings and prevents galling and scratches.
  · Rust-proofing effect can be obtained even after being wiped off with solvent.
  · Does not react with non-ferrous metals such as aluminum, brass, copper, etc.
  · A safe, non-solvent oil that does not contain any oils specified by the PRTR Law and the Occupational Safety and Health Act of Japan.
  [Applications]
  · For finishing of molds.

  Standard Price:	SGD 28.85
  Days to Ship:	9 Day(s)

• 

  Tsuya-Deru Polishing Compound

  MINITOR

  [Features]
  · For polishing and removing dirt from metal.
  Mildly fragrant type with no unpleasant odor (petroleum smell). Stubborn dirt and small scratches are removed cleanly, restoring beautiful luster.

  Standard Price:	SGD 21.07
  Days to Ship:	21 Day(s)

• 

  Polishing Compound, Solid Type

  NAKANISHI

  [Features]
  · An excellent compound for lapping that enables high precision polishing in a short amount of time.
  

  Standard Price:	SGD 19.08
  Days to Ship:	9 Day(s)

• 

  Sizer 46

  KOYO-SHA

  [Specifications]
  ·Used for sisal buffs
  ·For rough polishing, #240 or more, removal of belt marks
  ·: Rough polishing of steel and stainless steel

  Standard Price:	SGD 25.56
  Days to Ship:	4 Day(s) or more

• 

  White Bar 1300

  KOYO-SHA

  [Features]
  ·Used for sisal buffs
  ·KOYO-SHA's abrasive that ensures the highest quality finish

  Standard Price:	SGD 30.69
  Days to Ship:	4 Day(s) or more

• 

  Prince Lime

  KOYO-SHA

  [Features]
  ·KOYO-SHA's abrasive that ensures the highest quality finish
  ·For semi-polishing of hard metals such as steel and stainless steel

  Standard Price:	SGD 36.55
  Days to Ship:	14 Day(s) or more

• 

  Blue Bar K-1

  KOYO-SHA

  [Features]
  ·Used for cotton buffs, ideal for finishing
  ·Highest gloss (mirror surface) can be obtained when used with offset felt

  Standard Price:	SGD 53.45
  Days to Ship:	4 Day(s) or more

• 

  Non-Chrome Polishing Agent

  TRUSCO NAKAYAMA

  [Features]
  · Main component is an aluminum oxide abrasive.
  · Apply non-chrome abrasive onto Felt Buff Series to use for scratch removal as well as mirror finishing.
  · Since the finished surface is finer than green rouge, it is also used for erasing swirls after using green rouge.
  [Applications]
  · For mirror finish of steel, stainless steel, aluminum, etc.

  Standard Price:	SGD 23.90
  Days to Ship:	7 Day(s)

• 

  Polishing Burn Inhibitor

  TRUSCO NAKAYAMA

  [Features]
  · Burning is suppressed by application to the polishing belt or polishing wheel.
  · Increases the life of the abrasive belt and polishing wheel, achieving fine surface finish.
  [Applications]
  · Prevention of clogging and burning of polishing belts and polishing wheels.

  Standard Price:	SGD 18.83
  Days to Ship:	7 Day(s)

• 

  NEW Sun Light

  KOYO-SHA

  A mildly fragrant type with no unpleasant odor (petroleum smell)

  Standard Price:	SGD 13.90
  Days to Ship:	10 Day(s) or more

• 

  Blue Bar / White Bar

  ICHIGUCHI

  These are solid blue-bar and white-bar oil-based abrasives. It is recommended to use the white bar (part no. WB) for finishing stainless steel, aluminum, and chrome plating, and the green bar (part no. GB) for finishing precious metals, brass, and cast and forged products.
  
  [Features]
  · Solid oil-based abrasive.

  Standard Price:	SGD 11.20-
  Days to Ship:	7 Day(s)

• 

  Tripoli (Silica)

  TRUSCO NAKAYAMA

  [Features]
  · For ground polishing.
  [Applications]
  · For scratch fixing in Felt Buff series as well as mirror finishing.
  · Iron, Brass, Aluminum.

  Standard Price:	SGD 9.20
  Days to Ship:	7 Day(s)

• 

  White Alundum (Alumina Oxide)

  TRUSCO NAKAYAMA

  [Features]
  · For semi-finish polishing.
  [Applications]
  · For scratch fixing in Felt Buff series as well as mirror finishing.
  · Stainless steel, copper, etc.

  Standard Price:	SGD 15.50
  Days to Ship:	4 Day(s) or more

• 

  Hard Abrasive for Value Type Tripoli V

  YANASE

  [Features]
  · A solid abrasive for copper and brass.

  Standard Price:	SGD 9.70
  Days to Ship:	9 Day(s)

• 

  Blue Bar for Iron, Stainless Steel, Aluminum, Zinc GL

  YANASE

  [Features]
  · The highest grade for final finishing.
  · Highest gloss finish of general metal.
  · Used to provide a superlative gloss finish on general metals while balancing cutting power and glossiness.
  [Applications]
  · Iron, Stainless Steel

  Standard Price:	SGD 9.62
  Days to Ship:	4 Day(s) or more

• 

  Hard Abrasive for Value Type Red Rod E

  YANASE

  [Features]
  · An economic type has been manufactured which retains the performance of green rouge.
  [Applications]
  · Iron, stainless steel.

  Standard Price:	SGD 16.56
  Days to Ship:	4 Day(s) or more

Loading...