(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
Days to Ship |
|
---|
MISUMI
Not quenched and can be easily processed according to the workpiece diameter. Available at an affordable price.
Standard Price: | SGD 212.48- |
---|---|
Days to Ship: | 4 Day(s) or more |
Umbrella Type Rotation Center BRC
FUTAMURA MACHINES & TOOLS
[Features]
· Used for lathes and cylindrical grinding machines.
· Used for center pushing tool of pipe type, ring type and thin processed items.
· Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.
Standard Price: | SGD 524.96- |
---|---|
Days to Ship: | 10 Day(s) or more |
TAKURA KOGU
[Specifications]
·Takura Kogu Seisakusyo, lathe jig, lathe die holder (SET)
Standard Price: | SGD 567.75- |
---|---|
Days to Ship: | 6 Day(s) or more |
NSK lathe jig rotation center LC-A type
NSK
[Features]
· Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
[Applications]
· Workpiece support and runout prevention.
Standard Price: | SGD 486.81- |
---|---|
Days to Ship: | 4 Day(s) or more |
TC Type 2-Jaw Scroll Chuck Split Jaw (With Soft Jaw) Ordinary Type
KOBAYASHI IRON WORKS
[Features]
· 2-jaw scroll chuck
· Split-jaw type with soft jaw
· Front surface mounting
· Plate type
· Ideal for gripping irregular-shaped workpieces such as valves, etc.
Standard Price: | SGD 1,182.63- |
---|---|
Days to Ship: | 10 Day(s) |
BP Type Back Plate For Scroll Chucks
KOBAYASHI IRON WORKS
[Features]
· Chuck plate for a lathe
· For JIS and ASA-A1/A2 spindle ends
· Required to mount an ordinary-type chuck to a lathe.
Standard Price: | SGD 572.71- |
---|---|
Days to Ship: | 10 Day(s) |
MI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Direct Mounting Type
KOBAYASHI IRON WORKS
[Features]
· 4-jaw single-acting short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.
Standard Price: | SGD 1,559.75 |
---|---|
Days to Ship: | 10 Day(s) |
Soft Jaws (STJ) For RAC/RAC-B/SAC (B) 3 Pieces / 1 Set
KOBAYASHI IRON WORKS
Dedicated solenoid valve and hand valve provided.
[Features]
· Secondary side piping not required, making piping simple.
· Check valve ensures safety even during power outage or when there is an air piping accident.
· The hand valve is mounted directly on the chuck for convenient mounting and removal of the workpiece.
Standard Price: | SGD 156.73- |
---|---|
Days to Ship: | 10 Day(s) |
Soft Jaw (SSJ) Integrated Soft Jaw (For SC/MC 3-Jaw Chucks)【3 Pieces Per Package】
KOBAYASHI IRON WORKS
[Features]
· Soft jaw (integrated soft jaw) for SC/MC type chucks.
Standard Price: | SGD 162.21- |
---|---|
Days to Ship: | 10 Day(s) |
Master Jaw (MJ) Master Jaw For 3-Jaw Chucks (TC/TA/FCT/A Types) (For 3-Jaw Chucks)
KOBAYASHI IRON WORKS
[Features]
· Master jaw for TC type chucks.
Standard Price: | SGD 909.62 |
---|---|
Days to Ship: | 10 Day(s) |
NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]
· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.
Standard Price: | SGD 450.70- |
---|---|
Days to Ship: | 9 Day(s) or more |
NAKANE Rotating Center, Light Torque, Waterproof Type FP SP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type).
· Rotation follows quick-starting machines.
· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.
Standard Price: | SGD 418.78- |
---|---|
Days to Ship: | 9 Day(s) or more |
NAKANE Rotating Center, Light Torque, Waterproof Type FP TP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type).
· Rotation follows quick-starting machines.
· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.
Standard Price: | SGD 490.04- |
---|---|
Days to Ship: | 9 Day(s) or more |
NAKANE Rotating Center, with Carbide, Light Torque, Waterproof Type FPA
SANYOSEISAKUSYO
[Features]
· With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.
Standard Price: | SGD 800.72- |
---|---|
Days to Ship: | 9 Day(s) or more |
NAKANE Rotating Center, with Carbide, Strong Type XPA
SANYOSEISAKUSYO
[Features]
· With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.
Standard Price: | SGD 1,474.45- |
---|---|
Days to Ship: | 9 Day(s) or more |
NAKANE Rotating Center, Slide Back Type H
SANYOSEISAKUSYO
Can handle changes caused by heat swelling in machining of items such as long objects.
[Features]
· Slide-back structure using a dish spring.
· Prevents distortion due to thermal expansion of workpieces and wear of the center hole.
· The shape of the tip does not interfere with tool progress.
Standard Price: | SGD 642.54- |
---|---|
Days to Ship: | 6 Day(s) or more |
Kabuto Seal Center With Cold Punched Nut KSN
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.
Standard Price: | SGD 925.26- |
---|---|
Days to Ship: | 6 Day(s) or more |
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an air film resulting from rotation.
· Light rotational torque ideal for fine machining or light metal working.
· Replacement type head provides reductions in cost.
Standard Price: | SGD 872.00- |
---|---|
Days to Ship: | 6 Day(s) or more |
Soft Jaw For P-HO/B-200/N Resin Kitagawa Hydraulic/Pneumatic Chucks【3 Pieces Per Package】
GIGA SELECTION
[Features] The soft jaw material is soft and does not scratch the workpiece. Suitable for light cutting of thin materials and thin, tube-shaped workpieces.
Standard Price: | SGD 136.15- |
---|---|
Days to Ship: | 9 Day(s) or more |
Soft Jaw For SBS Small-Diameter (Iron/Aluminum) Kitagawa Scroll Chucks【3 Pieces Per Package】
GIGA SELECTION
A wide range of lineup. SBS Small Diameter (Steel/Aluminum) for Kitagawa Scroll Chuck
Standard Price: | SGD 133.15- |
---|---|
Days to Ship: | 6 Day(s) or more |
Soft-Jaw Molding Tool For JB-TYPE Hydraulic/Pneumatic Chucks
GIGA SELECTION
[Features]· Soft jaw molding tool for 3-jaw chucks with which soft-jaw molding can be implemented under the same conditions as when chucking workpieces, improving center runout precision and also enhancing gripping force. · Can be used for each manufacturer's hydraulic/pneumatic chucks.
Standard Price: | SGD 287.27- |
---|---|
Days to Ship: | 6 Day(s) or more |
Soft Jaw for Scroll Chucks【3 Pieces Per Package】
MISUMI
Those which suit chucks of Kitagawa are available
Standard Price: | SGD 48.84- |
---|---|
Days to Ship: | 4 Day(s) or more |
Firm Shaving Chuck (Points Only)【3 Pieces Per Package】
NEW STRONG
[Features]
·It can be used with Gan Chuck Bohzu (jig base) to expand the range of machining.
·A set of 4.
[Applications]
To grasp irregularly shaped objects.
Standard Price: | SGD 301.34- |
---|---|
Days to Ship: | 7 Day(s) or more |
KOBAYASHI IRON WORKS
[Features]
· Stepless fine tuning minimizes soft jaw wear.
· Extremely convenient for molding soft jaws with a small grip.
· Demonstrates performance with soft jaw through machining.
· The processing range can be enlarged by reversing the attaching direction of claws.
[Applications]
· Soft jaw molding jig for 3-jaw chuck.
· Can be used with hydraulic, pneumatic and scroll chucks.
Standard Price: | SGD 566.57- |
---|---|
Days to Ship: | 10 Day(s) |
TRUSCO NAKAYAMA
[Features]
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: | SGD 58.44- |
---|---|
Days to Ship: | 8 Day(s) |
High Jaw (for Both Howa and Kitagawa)【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: | SGD 375.57- |
---|---|
Days to Ship: | 8 Day(s) |
TRUSCO NAKAYAMA
[Features]
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: | SGD 92.91- |
---|---|
Days to Ship: | 8 Day(s) |
Soft Jaw (for Nikko)【1-3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: | SGD 65.66- |
---|---|
Days to Ship: | 8 Day(s) |
TRUSCO NAKAYAMA
[Features]
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Standard Price: | SGD 70.94- |
---|---|
Days to Ship: | 8 Day(s) |
Lathe Center With Super Carbide
FUTAMURA MACHINES & TOOLS
Used for various machines and cylindrical grinders.
(Please check the part number list for details.)
Standard Price: | SGD 209.85- |
---|---|
Days to Ship: | 10 Day(s) or more |
Rolling Center 100 With Stickers
FUTAMURA MACHINES & TOOLS
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
· V seal is adopted and suitable when cutting oil is used.
Standard Price: | SGD 406.31- |
---|---|
Days to Ship: | 10 Day(s) or more |
FUTAMURA MACHINES & TOOLS
Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type
Standard Price: | SGD 1,249.88- |
---|---|
Days to Ship: | 13 Day(s) or more |
Rolling Center RST With Carbide
FUTAMURA MACHINES & TOOLS
[Features]
· External appearance, shape and structure are the same with RST type, but carbide alloy chip is low-attached to the tip part of the center.
· As the carbide alloy insert is attached on the tip, it has superior anti-abrasion and anti-corrosion performance.
Standard Price: | SGD 490.82- |
---|---|
Days to Ship: | 10 Day(s) or more |
Work Driving Center DK Claw Fixed
FUTAMURA MACHINES & TOOLS
[Features]
· Ideal for gear cutting, spline processing, keyway processing, and woodworking.
· There will be no need of chuck if this device is used.
· As the processing items are maintained in both centers, the finishing of the processed items are the best.
· Single-action detaching / attaching of processed items is possible.
· By using the extraction nut, it is easy to remove from the machine.
Standard Price: | SGD 938.07- |
---|---|
Days to Ship: | 10 Day(s) or more |
FUTAMURA MACHINES & TOOLS
[Features]
· Center runout (maximum) against M.T. is TIR 0.01.
· Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
· The claw and the center shaft are made of high-speed steel to achieve high durability.
Standard Price: | SGD 1,483.60- |
---|---|
Days to Ship: | 10 Day(s) or more |
Work Driving Center, HD-Type Replacing Claw
FUTAMURA MACHINES & TOOLS
When the claw of the work driving center is worn and damaged, promptly replace the claw before using.
Standard Price: | SGD 317.28- |
---|---|
Days to Ship: | 13 Day(s) or more |
Standard Price: | SGD 642.80- |
---|---|
Days to Ship: | 8 Day(s) |
TRUSCO NAKAYAMA
[Features]
· It is all pure steel.
[Applications]
· Prevents runout of workpiece.
Standard Price: | SGD 40.12- |
---|---|
Days to Ship: | 4 Day(s) or more |
TRUSCO NAKAYAMA
[Features]
·It has a carbide tip.
·Prevents workpiece vibration.
·Materials: Carbon steel for machine structure (S45C)
Standard Price: | SGD 72.90- |
---|---|
Days to Ship: | 4 Day(s) or more |
Lathe Center (Long Type, with Extra-Hard Tip)
TRUSCO NAKAYAMA
[Features]
· By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.
[Applications]
· Prevents runout of workpiece.
Standard Price: | SGD 309.55- |
---|---|
Days to Ship: | 4 Day(s) or more |
"Half Center" (with Carbide Tip)
TRUSCO NAKAYAMA
[Features]
· The tip of the lathe center has been cut so as not to touch the workpiece.
[Applications]
· Prevents center deflection.
Standard Price: | SGD 371.35- |
---|---|
Days to Ship: | 4 Day(s) or more |
Umbrella-shaped rotating center (with bearings/TLK)
TRUSCO NAKAYAMA
[Features]
· With bearing.
[Applications]
· As a tool for centering holes at the pipe center.
Standard Price: | SGD 297.14- |
---|---|
Days to Ship: | 4 Day(s) or more |
SC Type 6-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Ordinary Type
KOBAYASHI IRON WORKS
[Features]
· 6-Jaw Scroll Chuck
· Integrated jaw type with internal jaw and external jaw
· Rear surface mounting
· Plate type
· Grips pipe-shaped workpieces with little distortion.
Standard Price: | SGD 1,978.16- |
---|---|
Days to Ship: | 10 Day(s) |
TA Type 3-Jaw Scroll Chuck Split Jaw (With Hard Jaw / Soft Jaw) Direct Mounting Type
KOBAYASHI IRON WORKS
[Features]
· 3-jaw scroll chuck
· Split-jaw type with hard jaw and soft jaw
· Direct mounting type (direct type)
· Short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.
· Suitable for high-speed, heavy cutting due to the durable box body structure and balance correction.
Standard Price: | SGD 1,799.09- |
---|---|
Days to Ship: | 10 Day(s) |
SA Type 3-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Direct Mounting Type
KOBAYASHI IRON WORKS
[Features]
· 3-jaw scroll chuck
· Integrated jaw type with internal jaw and external jaw
· Direct mounting type (direct type)
· Short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.
· Suitable for high-speed, heavy cutting due to the durable box body structure and balance correction.
Standard Price: | SGD 1,799.09- |
---|---|
Days to Ship: | 10 Day(s) |
Brand |
---|
Product Series |
Days to Ship |
Type |
Mounting type |
Compatible Chuck Nominal Size |
Jaw Height(mm) |
Compatible Manufacturer |
Chuck Outer Diameter(mm) |
Number of Jaws |
Shank MT No |
Tip Carbide Insert (Y/N) |
Tip Width Across Flat(mm) |
Auxiliary Jig Type |
Brand | MISUMI | FUTAMURA MACHINES & TOOLS | TAKURA KOGU | NSK | KOBAYASHI IRON WORKS | KOBAYASHI IRON WORKS | KOBAYASHI IRON WORKS | KOBAYASHI IRON WORKS | KOBAYASHI IRON WORKS | KOBAYASHI IRON WORKS | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | KABUTO MFG | KABUTO MFG | GIGA SELECTION | GIGA SELECTION | GIGA SELECTION | MISUMI | NEW STRONG | KOBAYASHI IRON WORKS | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | KAWASHIMO | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | KOBAYASHI IRON WORKS | KOBAYASHI IRON WORKS | KOBAYASHI IRON WORKS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | TC Type 2-Jaw Scroll Chuck Split Jaw (With Soft Jaw) Ordinary Type | MI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Direct Mounting Type | Soft Jaw (SSJ) Integrated Soft Jaw (For SC/MC 3-Jaw Chucks)【3 Pieces Per Package】 | Master Jaw (MJ) Master Jaw For 3-Jaw Chucks (TC/TA/FCT/A Types) (For 3-Jaw Chucks) | NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut | NAKANE Rotating Center, with Carbide, Light Torque, Waterproof Type FPA | Soft Jaw For P-HO/B-200/N Resin Kitagawa Hydraulic/Pneumatic Chucks【3 Pieces Per Package】 | Soft Jaw For SBS Small-Diameter (Iron/Aluminum) Kitagawa Scroll Chucks【3 Pieces Per Package】 | Soft-Jaw Molding Tool For JB-TYPE Hydraulic/Pneumatic Chucks | SC Type 6-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Ordinary Type | TA Type 3-Jaw Scroll Chuck Split Jaw (With Hard Jaw / Soft Jaw) Direct Mounting Type | SA Type 3-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Direct Mounting Type | |||||||||||||||||||||||||||||||||
Days to Ship | 4 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 10 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 13 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 13 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) |
Type | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Rotation Center / Lathe Center | Tailstock / Auxiliary Jig | Rotation Center / Lathe Center | - | - | - | - | Soft Jaw | - | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Soft Jaw | Soft Jaw | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Soft Jaw | Soft Jaw | - | Soft Jaw | Soft Jaw | Soft Jaw | Soft Jaw | Soft Jaw | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | - | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | - | - | - |
Mounting type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Serrated Type | Upper and Lower Divided Jaw Type | - | Upper and Lower Divided Jaw Type | Upper and Lower Divided Jaw Type | - | Serrated Type | Serrated Type | Upper and Lower Divided Jaw Type | Serrated Type | Serrated Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Compatible Chuck Nominal Size | 5 ~ 15 | - | - | - | - | - | - | - | 5 ~ 310 | - | - | - | - | - | - | - | - | - | 4 ~ 15 | 9 ~ 12 | 4 ~ 15 | 6 ~ 16 | - | - | 4 ~ 15 | 6 ~ 12 | 6 ~ 12 | 5 ~ 14~16 | 6 ~ 15~22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Jaw Height(mm) | - | - | - | - | - | - | - | - | 30 ~ 76.5 | - | - | - | - | - | - | - | - | - | 23 ~ 80 | 48 ~ 54 | - | 32 ~ 70 | 38 ~ 54 | - | 25 ~ 70 | 60 ~ 120 | 35 ~ 90 | 34 ~ 90 | 34 ~ 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Compatible Manufacturer | - | - | - | - | - | - | - | - | Victor | - | - | - | - | - | - | - | - | - | Kitagawa | Kitagawa | - | Kitagawa | Other | - | Howa | Howa | Other | Nikko | Matsumoto | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Chuck Outer Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 101.6 ~ 381 | 152.4 ~ 304.8 | 152.4 ~ 304.8 | 127 ~ 355.6~406.4 | 152.4 ~ 381~558.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Number of Jaws | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ~ 8 | - | - | - | - | - | - | - | - | - | - |
Shank MT No | - | MT2 ~ MT6 | MT2 ~ MT4 | MT3 ~ MT5 | - | - | - | - | - | - | MT2 ~ MT5 | MT1 ~ MT5 | MT1 ~ MT5 | MT2 ~ MT5 | MT3 ~ MT5 | MT3 ~ MT4 | MT3 ~ MT5 | MT3 ~ MT5 | - | - | - | - | - | - | - | - | - | - | - | MT1 ~ MT6 | MT2 ~ MT5 | MT5 ~ MT6 | MT1 ~ MT6 | MT3 ~ MT4 | MT4 ~ MT5 | - | - | MT1 ~ MT6 | MT1 ~ MT6 | MT2 ~ MT5 | MT1 ~ MT5 | MT2 ~ MT6 | - | - | - |
Tip Carbide Insert (Y/N) | - | N/A | - | N/A | - | - | - | - | - | - | N/A | N/A | N/A | Yes | Yes | N/A | N/A | Yes | - | - | - | - | - | - | - | - | - | - | - | Yes | Yes / N/A | N/A | Yes | N/A | N/A | N/A | - | N/A | Yes | Yes | Yes | N/A | - | - | - |
Tip Width Across Flat(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Auxiliary Jig Type | - | - | Die Holder | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?