(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Thread-Cutting-Related Tools(Coating Type:Non-Coated)

Threading-related tools are a variety of useful tools used when setting up screws, excluding typical taps and dies. Drill tap with integrated drill and tap, and female thread is set at a time even when there is no pilot hole, enabling high-efficiency work. A tap / drill bit set with a drill bit set for pilot holes attached to the tap set. A check pin dedicated to pilot holes that can easily and accurately inspect the pilot hole diameter of the screw and reduce defects in female thread processing. The lineup includes a magnet tapper that can be fixed with a magnet and tapped vertically, and that can prevent twisting bending and breakage. There are a wide variety of specifications for screws, so select a screw standard, thread diameter, and ridge pitch according to the processing purpose.
Days to Ship
  • All
  • Same day
  • 4 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    MACHINING CENTER Tap with Long Shank_EX-MCT

      Tire Valve Thread

        Shank Adjusters_SA

          MACHINING CENTER Tap (Normal Length)_EX-S-MCT

            Hexagonal Shaft Tap (for Through Hole)

              Cobalt jet/spiral type/drill set

                Mid Tap / Drill Set for Electric Construction

                  Hand Tap / Drill Set

                    Spiral Tap / Drill Set

                      Jet/spiral tap/drill set

                        Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

                          Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

                          Brand

                          OSG

                          SKC

                          YAMAWA MFG

                          OSG

                          ONISHI MANUFACTURING

                          ISHIHASHI

                          ISHIHASHI

                          ISHIHASHI

                          ISHIHASHI

                          ISHIHASHI

                          YAMAWA MFG

                          YAMAWA MFG

                          Product Series

                          MACHINING CENTER Tap with Long Shank_EX-MCT

                          Tire Valve Thread

                          Shank Adjusters_SA

                          MACHINING CENTER Tap (Normal Length)_EX-S-MCT

                          Hexagonal Shaft Tap (for Through Hole)【3 Pieces Per Package】

                          Cobalt jet/spiral type/drill set【21 Pieces Per Package】

                          Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】

                          Hand Tap / Drill Set【21 Pieces Per Package】

                          Spiral Tap / Drill Set【21 Pieces Per Package】

                          Jet/spiral tap/drill set【21 Pieces Per Package】

                          Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

                          Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

                          Days to Ship 4 Day(s) or more 4 Day(s) or more 7 Day(s) or more 4 Day(s) or more 7 Day(s) 4 Day(s) or more 4 Day(s) or more 7 Day(s) 7 Day(s) 7 Day(s) 9 Day(s) 9 Day(s)
                          Screw size (Nominal)M10 ~ M12TV8M3 ~ M10M8------No.10 ~ M12No.10 ~ M12
                          Screw TypesMeter-MeterMeterMeterMeter----Meter / unifiedMeter / unified
                          work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]-------
                          Pitch (P), Number of Threading(mm)1.5321501.25------0.4 ~ 640.4 ~ 64
                          Tool Material TypeVanadium High-Speed SteelHigh-speed steel-Vanadium High-Speed SteelHigh-speed steelCobalt HSS--High-speed steelHigh-speed steelHigh-speed steelHigh-speed steel
                          Tap TypeThread-cutting-related toolPoint tapThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related tool
                          Hole typeFor through hole / For blind holeFor blind hole-For through hole / For blind holeFor through hole-----For blind holeFor through hole / For blind hole
                          Chamfer threads (Lcf)3P--3P--------
                          Coating TypeNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated
                          Coating Y/NNANANANANANANANANANANANA
                          Overall Length (L)(mm)15070103 ~ 1277070/70/70-----41.5 ~ 12159.5 ~ 61.5

                          Loading...

                          1. 1

                          Related Categories to Thread-Cutting-Related Tools