(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Thread Cutters(Coating Type:TiAlN)

A thread mill is a cutter that uses an NC milling machine or machining center to machine internal threads. It processes internal threads by performing helical interpolation upon a pilot hole. Milling makes high-accuracy machining possible. In addition, since there is little cutting resistance, there are few problems with breaking, and even if breakage occurs, extraction can be performed easily. Many thread mills are made of carbide, and some coated thread mills are compatible with high-hardness steel, which is difficult to tap. With the same thread pitch, various thread diameters can be machined by changing the program. There are also mills that can perform pilot hole drilling and thread cutting with a single thread mill.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Coating Type
Coating Y/N
Overall Length (L)(mm)

    MMTS Micro Threading Tool

      TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

        TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

          TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

            Carbide Thread Mills for Metric Internal Threads_MC-CSLC

              Thread Cutting Tool (for Unified Threads) MMTU

                Planet Cutter Series NC Planet Cutter WX-PNC

                  Planet Cutter Series Super Planet DR-PNAC

                    Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                      Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                      Brand

                      NS TOOL

                      MISUMI

                      MISUMI

                      MISUMI

                      YAMAWA MFG

                      NS TOOL

                      OSG

                      OSG

                      OSG

                      OSG

                      Product Series

                      MMTS Micro Threading Tool

                      TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                      TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                      TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

                      Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                      Thread Cutting Tool (for Unified Threads) MMTU

                      Planet Cutter Series NC Planet Cutter WX-PNC

                      Planet Cutter Series Super Planet DR-PNAC

                      Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                      Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                      Days to Ship 11 Day(s) 6 Day(s) or more 4 Day(s) or more 6 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more
                      Screw size (Nominal)S0.1 ~ S1.4M2 ~ M12M3 ~ M20M1.4 ~ M2006510X28R ~ 200505N300MNO.0-80UNF ~ 1/4-20UNC-M6 ~ M12M6 ~ M12-
                      Screw TypesOtherMeterMeterMeterMeter / Taper for Pipe / Parallel for PipesunifiedMeter / unified / Taper for PipeMeterMeterMeter
                      work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
                      Pitch (P), Number of Threading(mm)0.025 ~ 0.30.4 ~ 1.750.5 ~ 2.50.3 ~ 2.50.5 ~ 3-1 ~ 281 ~ 1.751 ~ 1.750.5 ~ 3
                      Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                      Tap TypeThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutter
                      Hole type-For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind hole
                      Coating TypeTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlN
                      Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                      Overall Length (L)(mm)4558 ~ 7357 ~ 11539 ~ 10550 ~ 1404560 ~ 12062 ~ 8962 ~ 8960 ~ 120

                      Loading...

                      1. 1

                      Related Categories to Thread Cutters