(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Thread Cutting Holders(Shank size:25 Sq.)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Application
Screw Type
Pitch(mm)
Minimum Machining Diameter(mm)
Selfishly
Shank size
With/Without Cutting Oil Hole
With/without flat cutting blade

    CoroThread 266, Shank Tool Bit, Screw Clamp, Millimeter Version, 266R/LFA

      SEC-Threading Bit, Nejikiri-Kun, LTE Type

        SEC-Threading Bit for Outer Diameter, THE Type

        Brand

        SANDVIK

        SUMITOMO ELECTRIC HARDMETAL

        SUMITOMO ELECTRIC HARDMETAL

        Product Series

        CoroThread 266, Shank Tool Bit, Screw Clamp, Millimeter Version, 266R/LFA

        SEC-Threading Bit, Nejikiri-Kun, LTE Type

        SEC-Threading Bit for Outer Diameter, THE Type

        Days to Ship 8 Day(s) 4 Day(s) or more 6 Day(s) or more
        ApplicationOuter Diameter ScrewOuter Diameter ScrewOuter Diameter Screw
        Screw Type60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT)60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes60° Meter (M) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes
        Pitch(mm)-1.00~3.000.80~3.00
        Minimum Machining Diameter(mm)---
        SelfishlyRight-hand / Left-handRight-handRight-hand
        Shank size25 Sq.25 Sq.25 Sq.
        With/Without Cutting Oil HoleNA--
        With/without flat cutting bladeNABoth yes and noBoth yes and no

        Loading...

        1. 1

        Related Categories to Thread Cutting Holders