(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Inserts (for Milling)
A type of milling cutter. Cutting edge and shank are separate parts and fixed with screws, etc. It is sometimes called an insert. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry, and MISUMI also develops its own brand products and offers them to customers.
| Days to Ship |
|
|---|
-
KYOCERA
[Specifications]·Shape: Other "Features of material"· PR1225 is a MEGACOAT with excellent abrasion resistance and heat resistance for a fine-grained carbide substrate.
Standard Price: SGD 6.88- Days to Ship: Same day or more -
OSG
An insert for OSG-WALTER. The insert material and chip breaker shape can be selected according to the work material and machining mode.
Standard Price: SGD 15.95- Days to Ship: 3 Day(s) or more -
Used for SEC-Wave Mill AXMT-PEER-G
SUMITOMO ELECTRIC HARDMETAL
Curved cutting blade adopted to improve cutting edge strength and reduce cutting resistance. Achieves high quality machining in the finishing region with the high precision cutting blade.
Standard Price: SGD 9.33- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 66.30- Days to Ship: 14 Day(s) -
KYOCERA
[Applications]Can be used for machining a wide range of steel materials, such as steel, stainless steel, heat-resistant alloys, titanium alloys, and hardened materials.
Standard Price: SGD 7.80- Days to Ship: Same day or more -
Days to Ship: 3 Day(s) or more -
Standard Price: SGD 37.60- Days to Ship: 10 Day(s) -
BIG DAISHOWA SEIKI
[Features]
· Tips with optimally designed clearance angles and rake angles for each cutter sizeStandard Price: SGD 14.40- Days to Ship: 7 Day(s) or more -
Tips Compatible with Fast Feeding Die Master Models SKS and SKS-RS (No Circuit Breaker)
DIJET
[Features]
· Suitable for high-efficiency machining.Standard Price: SGD 8.55- Days to Ship: 4 Day(s) or more -
MGI Type Grooving End Mill Compatible Tip
KYOCERA
[Applications]Can be used for machining a wide range of steel materials, such as steel, stainless steel, heat-resistant alloys, titanium alloys, and hardened materials.
Standard Price: SGD 17.23- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model SEMT13T3AG□N-□
SUMITOMO ELECTRIC HARDMETAL
Manufactured by Sumitomo Electric Hardmetal.
The optimized shape and tough material provide both cutting performance and strength at a high level.Standard Price: SGD 7.78- Days to Ship: 4 Day(s) or more -
Phoenix Series PSE Insert for Shoulder
OSG
Insert for shoulder milling cutter series, PSE. The insert material and chip breaker shape can be selected according to the work material and machining mode.
Standard Price: SGD 17.80- Days to Ship: 3 Day(s) or more -
Days to Ship: 3 Day(s) or more -
Milling Machine Insert S (Square)
SANDVIK
Adopting unique material and shape using cutting-edge technology to demonstrate high performance
Standard Price: SGD 14.05- Days to Ship: 4 Day(s) or more -
DIJET
"Mirror Radius RNM/MRN" insert for high-speed high-efficiency machining of molds, usable for medium finishing to finishing and also supports high hardness materials.
· [Features]
· Uses new material "DH102," a combination of "New DH (Dijet Hard) Coating" (a new PVD coating for hardened materials and high speed machining) and a micrograin ultra-hard alloy for hardened materials to attain long-life use. JC8015 material is available for general steel, etc.
· A positive blade shape is used, like the conventional HRM type, with low cutting resistance and favorable cutting quality.
· Tools can be consolidated by using 1 holder and changing the insert, handling from rough machining to finishing of any work material.Standard Price: SGD 78.10- Days to Ship: 7 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
Using a curved cutting blade improves blade tip strength and reduces cutting resistance. The high precision blade attains a high quality machining surface, approaching the finishing range.
Standard Price: SGD 10.82 Days to Ship: 4 Day(s) or more -
Side Chipper SIC Type Compatible Tip
DIJET
[Features]
· It is a tool with excellent abrasion resistance.Standard Price: SGD 13.20- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 11.94- Days to Ship: 14 Day(s) -
Standard Price: SGD 60.48- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 61.24- Days to Ship: 4 Day(s) or more -
Thread Milling Insert For CoroMill 327 (For Tapping), V-Shaped 60°
SANDVIK
Sharp cutting edges for low cutting forces, high quality burr-free grooves, wide range of shank lengths and diameters
Standard Price: SGD 90.89- Days to Ship: 8 Day(s) or more -
Kyocera Milling Tip PR1535 PVD Coating
KYOCERA
[Features]
· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.
· Compatible with milling of Ti alloy and precipitation hardened stainless steel.
[Applications]
· For Milling
· PR1535: For milling of Ti alloy and precipitation hardened stainless steelStandard Price: SGD 13.09- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 10.30- Days to Ship: 4 Day(s) or more -
Slot Mill, Horizontal Placement Type/Half Side Slot Mill SD..1204
KYOCERA
Drawing specification half side slot mill.
Standard Price: SGD 16.24- Days to Ship: 4 Day(s) or more -
Kyocera Milling Tip CA6535 CVD Coating
KYOCERA
[Features]
· CA6535: CVD grade for milling with improved stability thanks to the use of thin film.
· Exhibits high heat resistance and abrasion resistance.
· For Ni-based heat-resistant alloy and martensitic stainless steel milling.
[Applications]
· For Milling
· CA6535: Milling of Ni-base heat-resistant alloy and martensitic stainless steelStandard Price: SGD 9.20- Days to Ship: 8 Day(s) -
Kyocera Milling Tip PR1535 PVD Coating
KYOCERA
[Features]
· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.
· Compatible with milling of Ti alloy and precipitation hardened stainless steel.
[Applications]
· For Milling
· PR1535: For milling of Ti alloy and precipitation hardened stainless steelStandard Price: SGD 9.20- Days to Ship: 8 Day(s) -
Kyocera Milling Tip PR1535 PVD Coating
KYOCERA
[Features]
· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.
· Compatible with milling of Ti alloy and precipitation hardened stainless steel.
[Applications]
· For Milling
· PR1535: For milling of Ti alloy and precipitation hardened stainless steelStandard Price: SGD 20.00 Days to Ship: 8 Day(s) -
Mirror Bore Only, Mirror S Tip, BNM-TG Shape
DIJET
Blade tip enhanced-type tips for high-hardness materials are newly added to the product range of "Mirror Ball BNM/MBN Type" for high-precision mold finish machining
[Features]
· Reinforced blade tip type that brings out its best under harsh conditions such as long projection length machining, overlay machining, and multiple work material simultaneous cutting.
· Features the new material "DH102", a combination of the new PVD coating "New DH (Dijet Hard) Coat" for high-hardness materials/high-speed machining and micro grain carbide for high-hardness materials.
· The negative blade shape provides long service life even in high-speed machining of high-hardness materials exceeding 60 HRC.Standard Price: SGD 71.49- Days to Ship: 7 Day(s) or more -
Milling Insert (With Hole) LPGT
KYOCERA
[Features]
The special nano-laminated coating improves abrasion resistance and stability and is compatible with roughing and semi-finishing of stainless steel and heat resistant alloys, and for the parting-off of stainless steel.Standard Price: SGD 9.62 Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip APMT-PDER
SUMITOMO ELECTRIC HARDMETAL
Combines sharpness and edge strength. Reduced cutting resistance realizes chip discharge amounts with lower required power
Standard Price: SGD 11.57- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill AXET-PEFR-S
SUMITOMO ELECTRIC HARDMETAL
Curved cutting blade adopted to improve cutting edge strength and reduce cutting resistance. Achieves high quality machining in the finishing region with the high precision cutting blade.
Standard Price: SGD 9.70- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill AXMT-PEER-H
SUMITOMO ELECTRIC HARDMETAL
Curved cutting blade adopted to improve cutting edge strength and reduce cutting resistance. Achieves high quality machining in the finishing region with the high precision cutting blade.
Standard Price: SGD 9.33- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 83.60- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 27.50- Days to Ship: 8 Day(s) or more -
Kyocera Milling Tip PR1535 PVD Coating
KYOCERA
[Features]
· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.
· Compatible with milling of Ti alloy and precipitation hardened stainless steel.
[Applications]
· For Milling
· PR1535: For milling of Ti alloy and precipitation hardened stainless steelStandard Price: SGD 18.60- Days to Ship: 8 Day(s) -
SEC-Wave Mill For WFXF 12000R(S) Type Insert
SUMITOMO ELECTRIC HARDMETAL
Sumitomo Electric Hard Metal Tips (for Milling) SEC-Wave Mill WFXF 12000R (S) Type Tips.
Standard Price: SGD 10.87- Days to Ship: 7 Day(s) or more -
High Feed Radius Cutter Insert
MISUMI
[Features]
·High feed radius cutter tip capable of 1-flute feed of up to 3 mm
·Uses coating suitable for stainless steel machining- Volume Discount
Standard Price: SGD 11.59 Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Bore, WBMF Model ZPGU
SUMITOMO ELECTRIC HARDMETAL
[Features]
·Super ZX Coat provides high abrasion resistance.
Grade: Coating
Relief angle: P (11°)Standard Price: SGD 50.20- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Bore, WBMR Model ZNMT
SUMITOMO ELECTRIC HARDMETAL
[Features]
·All sizes of these M-class inserts have high strength and are economical.
Relief angle: N (0°)Standard Price: SGD 18.47- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model SEET13T3AG□N-□
SUMITOMO ELECTRIC HARDMETAL
Manufactured by Sumitomo Electric Hardmetal.
The optimized shape and tough material provide both cutting performance and strength at a high level.Standard Price: SGD 9.44- Days to Ship: 4 Day(s) or more -
Used for SEC-Multi Mill, CHE model TEEN-TR
SUMITOMO ELECTRIC HARDMETAL
[Applications]Can be used for machining steel and stainless steel. [Features]Cermet, cemented carbide, and coating materials are used.
Standard Price: SGD 11.29- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip AECT-PEFRA
SUMITOMO ELECTRIC HARDMETAL
[Applications]It can be used for high-speed and light cutting, and general-purpose cutting. [Features]Cemented carbide and DLC materials are used.
Standard Price: SGD 18.06- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SOMT-PDER-G
SUMITOMO ELECTRIC HARDMETAL
[Applications]It can be used for machining steel, cast iron, stainless steel, and difficult-to-cut materials. [Features]It is coated and uses a cermet material.
Standard Price: SGD 11.41 Days to Ship: 4 Day(s) or more -
BIG DAISHOWA SEIKI
[Features]
· A dedicated tip specially designed to have an optimal relief angle and rake range for each cutter size.Standard Price: SGD 15.50- Days to Ship: 8 Day(s) or more -
Super Die Mate Modular Head SDH Type Compatible Tip
DIJET
[Features]
· Supports materials from cast iron and general steel to stainless steel, titanium, and inconelStandard Price: SGD 8.80- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shape (initial letter of model number) |
| work material |
| Clearance angle |
| Available corners |
| Data for CAM / Tool Management Software |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | OSG | SUMITOMO ELECTRIC HARDMETAL | DIJET | KYOCERA | SANDVIK | SANDVIK | BIG DAISHOWA SEIKI | DIJET | KYOCERA | SUMITOMO ELECTRIC HARDMETAL | OSG | SANDVIK | SANDVIK | DIJET | SUMITOMO ELECTRIC HARDMETAL | DIJET | DIJET | DIJET | DIJET | SANDVIK | KYOCERA | DIJET | KYOCERA | KYOCERA | KYOCERA | KYOCERA | DIJET | KYOCERA | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | SANDVIK | KYOCERA | SUMITOMO ELECTRIC HARDMETAL | MISUMI | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | BIG DAISHOWA SEIKI | DIJET |
| Product Series | Tips Compatible with Fast Feeding Die Master Models SKS and SKS-RS (No Circuit Breaker) | Thread Milling Insert For CoroMill 327 (For Tapping), V-Shaped 60° | Slot Mill, Horizontal Placement Type/Half Side Slot Mill SD..1204 | ||||||||||||||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | 3 Day(s) or more | 4 Day(s) or more | 14 Day(s) | Same day or more | 3 Day(s) or more | 10 Day(s) | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more |
| Shape (initial letter of model number) | O (Regular octagon) / P (Regular pentagon) / S (Square) / B (82° Parallelogram) / L (Rectangular) / W (Hexagonal Type) / R (Circular) / Other | O (Regular octagon) / S (Square) / T (Equilateral Triangle Type) / A (85° parallelogram) / L (Rectangular) / R (Circular) / Other | A (85° parallelogram) | Other | S (Square) / T (Equilateral Triangle Type) | S (Square) | S (Square) | - | Other | Other | S (Square) | Other | S (Square) | S (Square) | Other | A (85° parallelogram) | Other | S (Square) / Other | Other | Other | Other | - | Other | S (Square) | - | - | - | Other | L (Rectangular) | A (85° parallelogram) | A (85° parallelogram) | A (85° parallelogram) | Other | P (Regular pentagon) | - | S (Square) | Other | Other | Other | S (Square) | T (Equilateral Triangle Type) | A (85° parallelogram) | S (Square) | - | R (Circular) |
| work material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / High Hardness Material | Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Stainless Steel | Heat-resistant alloy, titanium alloy | Stainless Steel | Steel / Cast Iron / High Hardness Material | Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal | Stainless Steel | Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material |
| Clearance angle | - | P (11°) / D(15°） / E(20°） / N(0°） / Other | P (11°) | Other | - | D(15°） | N(0°） | - | D(15°） / Other | - | E(20°） | D(15°） | E(20°） | P (11°) | Other | P (11°) | C(7°） / P (11°) | Other | Other | Other | Other | - | P (11°) / D(15°） | - | - | - | - | Other | P (11°) | P (11°) | P (11°) | P (11°) | Other | N(0°） | - | Other | D(15°） | P (11°) | N(0°） | E(20°） | E(20°） | E(20°） | Other | - | D(15°） |
| Available corners | - | - | - | 1 / 2 | - | 4 | 4 | - | 3 | - | - | - | 4 | 4 | - | - | 2 | 2 / 4 | 1 / 2 | 2 | 3 / 6 | - | 2 | - | - | - | - | - | - | - | - | - | 1 | 5 | - | - | 4 | - | - | - | - | - | - | - | 1 |
| Data for CAM / Tool Management Software | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape (initial letter of model number)
-
work material
-
Clearance angle
-
Available corners
-
Data for CAM / Tool Management Software
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Inserts (for Milling)
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?