3 Million Products, 1000 Brands.

20,000 Stock items same day Ship Out Products.

Search by
Category, Brand

Search by Category
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Material Handling & Storage
Safety & General Supplies
Lab & Clean Room Supplies
Press Die Components
Plastic Mold Components

Brand Search
Brand List
Need Help?

Board-To-Board Connectors

Days to Ship
  • ALL
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 14 Day(s) or Less
  • 22 Day(s) or Less
  • 23 Day(s) or Less
  • 32 Day(s) or Less
  • Board-to-Board Connector with 2.54-mm Pitch: HIF3H Series

    Board-to-Board Connector with 2.54-mm Pitch: HIF3H Series

    HIROSEDENKI

    This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors. [Features] ・Product variations: It is possible to connect board-to-board either horizontally or at a right angle. ・Compatibility: It can be combined with other HIF3 series connectors.

    Days to Ship
    3 Day(s) or more
  • 3M<sup>TM</sup> Standard Socket / Header Socket Connector 79XX Series

    3MTM Standard Socket / Header Socket Connector 79XX Series

    3M

    The socket connectors also support wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain. [Features] Compatible with various headers and plug connectors for standard sockets/headers. ▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins. ▪ Also supports wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain. · Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief. · A film-type pull tab can be attached (J3490-X). ▪ Accessory key prevents incorrect insertion between the same number of pins (J3435-0000). *Note: Strain relief sold separately. (Model: 3448-79**) **...Number of Pins.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Pin Header with 2.54-mm Pitch (Terminal 1-Row Type), A2 Series

    Pin Header with 2.54-mm Pitch (Terminal 1-Row Type), A2 Series

    HIROSEDENKI

    2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board. [Features] · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise. · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins. · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.

    Days to Ship
    3 Day(s) or more
  • Micro-USB Connector - ZX Series

    Micro-USB Connector - ZX Series【1-100 Pieces Per Package】

    HIROSEDENKI

    Micro-USB connector supporting the USB 2.0 standard. Hirose Electric Group is an industry leader in standardization, offering a wide array of products. Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • IC Socket - XR2
    Days to Ship
    3 Day(s)
  • Pin Header with 2.54-mm Pitch (Terminal 2-Row Type), A1 Series

    Pin Header with 2.54-mm Pitch (Terminal 2-Row Type), A1 Series

    HIROSEDENKI

    2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board. [Features] · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise. · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins. · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.

    Days to Ship
    3 Day(s) or more
  • FFC Series

    FFC Series

    HONDATSUSHIN

    Connectors for 2.54 mm-pitch Board-to-board Connection, Full Product Line-up [Features] • The FFC series are highly reliable products with long records of performance as headers for 2.54 mm-pitch boards. They can be used in a variety of applications. • Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors. • Can be used, in combination with the DIC series, as circuit-switching terminal plates. • You can select the number of contacts you require. • Many pin lengths are available, so you can select the length for your application. • Select the surface treatment you need: gold, tin, or copper. • Molds come in two colors (black and red). • Remover pin prevents backwards insertion.

    Days to Ship
    3 Day(s) or more
  • DIN Standard Compliant Board-to-Board Connector PCN10 Series

    DIN Standard Compliant Board-to-Board Connector PCN10 Series【1-100 Pieces Per Package】

    HIROSEDENKI

    This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

    Days to Ship
    3 Day(s) or more
  • DIC Series

    DIC Series

    HONDATSUSHIN

    These are 2.54 mm pitch connectors used for circuit switching and the like. [Features] • Many varieties available for combination with the FCC and HKP series. • Plating thickness is selectable, at different costs. • The insulator is UL-certified. • These connectors also come in a series of 2, 3 and 4.

    Days to Ship
    3 Day(s) or more
  • 2-mm Pitch Pin Header (Terminal 2-Row Type) A3 Series

    2-mm Pitch Pin Header (Terminal 2-Row Type) A3 Series【1-10,000 Pieces Per Package】

    HIROSEDENKI

    2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation. [Features] · Small, high-density mounting: A small, lightweight design enables high-density mounting. · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid. · Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided. · Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header. In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Shorting Connectors - XJ8/XG8S/XG8T
    Days to Ship
    3 Day(s)
  • FunctionMAX Board-to-Board Connector FX23 Series

    FunctionMAX Board-to-Board Connector FX23 Series

    HIROSEDENKI

    0.5mm pitch. This single connector combines two opposing functions: a floating design and high-speed transmission.

    Days to Ship
    5 Day(s) or more
  • USB Connector, XM7
    Days to Ship
    3 Day(s)
  • Connectors for Connecting to 0.5/1-mm Pitch FPC/FFC - FH12 Series

    Connectors for Connecting to 0.5/1-mm Pitch FPC/FFC - FH12 Series【1-2,000 Pieces Per Package】

    HIROSEDENKI

    [Features] · The industry's first flip-lock ZIF connector. · Available in a wide array of variations with a proud track record lasting more than 10 years. In-stock items are custom products, therefore returns and cancellations are not possible.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Original Plug - XG8
    Days to Ship
    3 Day(s) or more
  • Board-to-Cable Connector with Lock, 7.92-mm Pitch, High-Current Support - DF22 Series

    Board-to-Cable Connector with Lock, 7.92-mm Pitch, High-Current Support - DF22 Series【1-2,500 Pieces Per Package】

    HIROSEDENKI

    [Features] · Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes. · Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety. In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Pin Header with 2-mm Pitch (Terminal 1-Row Type), A4 Series

    Pin Header with 2-mm Pitch (Terminal 1-Row Type), A4 Series

    HIROSEDENKI

    2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation. [Features] · Small, high-density mounting: A small, lightweight design enables high-density mounting. · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid. · Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided. · Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.

    Days to Ship
    3 Day(s) or more
  • Bottom Entry Connector with 2.54-mm Pitch, MDF7 Series

    Bottom Entry Connector with 2.54-mm Pitch, MDF7 Series【1-100 Pieces Per Package】

    HIROSEDENKI

    With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT. [Features] ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels. ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other. ▪ Rich variation: single-array, double-array, and tin/gold plating available. ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

    Days to Ship
    3 Day(s) or more
  • Board-to-Board Connector (0.6-mm Pitch, 5 to 16-mm Height) - FX8C Series

    Board-to-Board Connector (0.6-mm Pitch, 5 to 16-mm Height) - FX8C Series【1-1,000 Pieces Per Package】

    HIROSEDENKI

    The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment. [Features] · Stacking height 3 mm to 16 mm compatible. · Stacking height between boards of 3 mm to 16 mm is applicable. ▪ SMT co‐planarity. ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less. · Fit guiding. · Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm. · Protects against incorrect insertion into the circuit board. · Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss. · Two-part integrated product. · This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.) In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Flat Cable Connector (PCB Type), XG2

    Flat Cable Connector (PCB Type), XG2

    OMRON

    [Features] · Total cost reduction is achieved by high-density mounting and low-power wire connections. · The pressure-welded system lets you connect all terminals in bulk without any terminal processing work. · Can be dip-soldered directly to a PCB. · The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency. · Uses a 2.54 mm grid terminal array. · PCB pattern design is easy. · Two types of terminal arrays: standard and inverse. · Uses insulating materials complying with UL standards (UL94V-0). · Pressure-welding tool uses attachment that supports all poles. · Saves time and work connecting wires. ▪ RoHS compliant.

    Days to Ship
    3 Day(s)
  • DHB series board-to-board half-pitch connector

    DHB series board-to-board half-pitch connector

    DDK

    There are two contact tail lengths (long and short) for each row, to facilitate insertion into PCB through holes. [Features] ・In addition to lock pins for fixing to the PCB, some of the contacts (4 on each side) have kink processing for temporary holding of the connector. ・Based on a dimension of 15.1mm between boards, various products are available depending on the application, such as the “stacking receptacle” type that can be selected in a range of 17 to 20mm at 1mm increments, the “low profile” type with a dimension of 10mm between boards, the “sequence type” with contact timing shift of 1.4mm, and the “slotted” type which ensures there will be no breakage at both ends even if the connector is removed at an angle. ・The plug connector can also be used as a mating connector for the flat cable connector DHD series. ・This product complies with Lead Free regulations.

    CAD
    2D
    Days to Ship
    32 Day(s) or more
  • DFJ Series 0.8 mm Pitch Stacking Connectors

    DFJ Series 0.8 mm Pitch Stacking Connectors

    DDK

    These compact 0.8 mm-pitch stacking connectors are for parallel connection of PCBs. [Features]• Choose from among 9 PCB spacing dimensions: 10 mm and between 13 and 20 mm in 1 mm increments. • Mounting onto the PCB is SMT type; a fixing bracket is provided for secure attachment to the board. • The mating opening is structured to prevent insertion errors. • Contacts are cantilevered for minimal deformation during mating. • The line-up includes an easy-locking connector that provides a click feel when the contact is inserted.

    CAD
    2D
    Days to Ship
    39 Day(s) or more
  • DHD Series - Flat Cable Connectors for Use Inside Half-Pitch Equipment

    DHD Series - Flat Cable Connectors for Use Inside Half-Pitch Equipment

    DDK

    [Features] • Compatible with half-pitch connectors for DHB series PCBs. • Pressure contact isolates the cable into two sections at the top and bottom covers, using the covers for insulation, which makes insulation dependable. • The connectors allow for daisy-chain connections. • The easy-locking type is far shorter than the usual ejector lock (26-, 34-, 40-, 50-, 60-, and 68-contact types). • The ejector lock types (34-, 50-, 68-, 80-, and 100-contact types) lock and disengage easily, and provide secure locking.

    CAD
    2D
    Days to Ship
    32 Day(s) or more
  • Board-to-Board Connector with 0.4-mm Pitch, 1.5 to 4.0-mm Height - DF40 Series

    Board-to-Board Connector with 0.4-mm Pitch, 1.5 to 4.0-mm Height - DF40 Series

    HIROSEDENKI

    A 0.4-mm pitch board-to-board (FPC) connector. Select the height spacing between the circuit boards from 1.5 to 4.0 mm. In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Board-to-Board Connector (0.5-mm Pitch, 4 to 5-mm Height) - FX10 Series

    Board-to-Board Connector (0.5-mm Pitch, 4 to 5-mm Height) - FX10 Series【1-1,000 Pieces Per Package】

    HIROSEDENKI

    [Features] · Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable. Some in-stock items are custom products, therefore returns and cancellations are not possible.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • 0.5-mm Pitch, 2.55-mm Height, Solid-Build FPC/FFC Connector, FH28 Series

    0.5-mm Pitch, 2.55-mm Height, Solid-Build FPC/FFC Connector, FH28 Series【1-2,000 Pieces Per Package】

    HIROSEDENKI

    [Features] · A solidly built connector for FPC/FFC connections. · An FPC positioning mechanism provides highly reliable connections. In-stock items are custom products, therefore returns and cancellations are not possible.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Mini-USB Connector UX60S Series

    Mini-USB Connector UX60S Series

    HIROSEDENKI

    These are Mini-USB connectors that meet the USB 2.0 standard. A space-saving design that is not as deep as conventional connectors. [Features] • USB 2.0 compliant: With transfer speeds up to 480 Mbps, these are suitable for connecting computer peripherals and the like. • Space-saving design: With a depth of only 7.0 mm, sets require less mounting space. • Compatible with automated mounting: Compatible with embossed tape feeds, allowing use with auto-mounting. • A type that has heat-resistant tape for adhering onto the top surface of the receptacle is also available. • RoHS compliant: These connectors use no materials proscribed by RoHS, making them more environmentally friendly. In-stock items are custom products, therefore returns and cancellations are not possible. Thank you for your understanding.

    • Volume Discount
    Days to Ship
    3 Day(s)
  • Board-to-Board Connector for Power Supply, Compatible with High Current, MCN51 Series

    Board-to-Board Connector for Power Supply, Compatible with High Current, MCN51 Series

    HIROSEDENKI

    Board-to-board power supply connector compatible with high-current power sources. A UL and CSA certified product. [Features] ・Compatible with high voltage: board-to-board connector compatible with a maximum current of 27 A per pin. ・Hirose original press-fit construction: original press-fit construction is designed to reduce circuit board damage. ・Pin number development: Comes in 8-pin or 30-pin models. ・UL and CSA certified product: the UL and CSA file number is as follows: UL File No.E52653, UL File No.LR95109.

    Days to Ship
    Quote
  • EnerBee Board-to-Cable Connector with Lock DF63 Series

    EnerBee Board-to-Cable Connector with Lock DF63 Series【1-4,000 Pieces Per Package】

    HIROSEDENKI

    Maximum 15A. 3.96mm pitch. This connector employs a center lock function which enables high-density mounting, contributing to space saving on the board.

    Days to Ship
    5 Day(s) or more
  • CF Card Connector MI20/21 Series

    CF Card Connector MI20/21 Series

    HIROSEDENKI

    This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.

    Days to Ship
    3 Day(s) or more
  • Connectors for FPC/FFC Connections with 0.5-mm Pitch and 0.9-mm Height, FH19C/SC Series

    Connectors for FPC/FFC Connections with 0.5-mm Pitch and 0.9-mm Height, FH19C/SC Series【1-5,000 Pieces Per Package】

    HIROSEDENKI

    [Features] ・These are small, low-profile, best-selling ZIF connectors. ・They contribute to thinner, smaller type equipment.

    Days to Ship
    6 Day(s) or more
  • FunctionMAX Board-to-Board Connector FX18 Series

    FunctionMAX Board-to-Board Connector FX18 Series

    HIROSEDENKI

    0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.

    Days to Ship
    5 Day(s) or more
  • Board-to-Board Connector with 1.27-mm Pitch and 5 to 11-mm Height, FX4 Series

    Board-to-Board Connector with 1.27-mm Pitch and 5 to 11-mm Height, FX4 Series

    HIROSEDENKI

    Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height. [Features] ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm. ●Dip Timer. 1. Small and Lightweight. ・Mounting space and weight are the same as the prior products (FX2 series). ・Approx. 30% in comparison, mounting area is approx. 70% of prior product. 2. · Compatible with 5 mm to 11 mm stacking height. · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments. 3. Prevention of flux oozing. · Prevents flux oozing during circuit board dip soldering. 4. Construction that prevents mis-insertion and reduces the required insertion/extraction force. · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

    Days to Ship
    3 Day(s) or more
  • Board-to-Board Connector (1-mm Pitch, 4.3-mm Height) - DF9 Series

    Board-to-Board Connector (1-mm Pitch, 4.3-mm Height) - DF9 Series【1-1,000 Pieces Per Package】

    HIROSEDENKI

    A board-to-board connector with a 1-mm pitch. The 31-pin, 41-pin comply with FPDI-1 standard connector specifications that have been adopted by VESA. In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

    • Volume Discount
    Days to Ship
    3 Day(s) or more
  • Board-to-Board Connector with 0.8-mm Pitch and 5 to 9-mm Height, FX6 Series

    Board-to-Board Connector with 0.8-mm Pitch and 5 to 9-mm Height, FX6 Series

    HIROSEDENKI

    The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability. [Features] · Compatible with 5 mm to 9 mm stacking height. · The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments. · Long effective mating length of 1.7 mm. · A long and spacious effective mating length of 1.7 mm even with RoPro connectors. · Fit guiding. · A ±1 mm self alignment and large guiding volume makes for easy mating. · Supports automatic mounting. ·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit). ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.

    • Volume Discount
    Days to Ship
    3 Day(s) or more

Configure

Clear All

Specification/Dimensions

Brands

Brand

MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close