Square Connectors（Page3）

• 

  D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

  HIROSE ELECTRIC

  A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
  
  [Features]
  • Metal shell makes it compact and sturdy.
  • Connectors can be mounted on the chassis, or on the front or back sides of the panel.
  • Height of the wiring side is greatly reduced to facilitate more compact sets.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  • Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
  • Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

  Standard Price:	SGD 8.11-
  Days to Ship:	4 Day(s) or more

• 

  DeviceNet Compliant Connector, HR31 Series

  HIROSE ELECTRIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  Standard Price:	SGD 1.56-
  Days to Ship:	3 Day(s) or more

• 

  IL-AG7 Series

  JAPANAVIATION

  This pin connector has flanges to screw in to the board.
  
  [Features]
  ・This pin connector has flanges on both sides of the insulator to screw in to the board.
  ・By screwing in using the flanges, it can be fixed more firmly to the board.
  ・The straight type is molded to alleviate stress on the soldered parts, which prevents cracking of solder due to changes in temperature.
  ・This prevents differences in expansion coefficient between the board and insulator due to rapid temperature changes, and solder cracking caused by vibration.
  ・The conformation of the fitting element and color are different from the standard type (standard: green, mismatch prevention: light blue), so the product is ideal for use when two connectors are used next to each other with the same number of poles.

  Standard Price:	SGD 2.07-
  Days to Ship:	3 Day(s) or more

• 

  Miniature Low-Profile Interface DN Connector

  HIROSE ELECTRIC

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  Standard Price:	SGD 9.39-
  Days to Ship:	4 Day(s) or more

• 

  Han A Series Connector (Screw Type Wire Connection)

  HARTING

  This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

  • Volume Discount

  Standard Price:	SGD 13.62-
  Days to Ship:	4 Day(s) or more

• 

  CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

  ILME

  CK / CKS Small screw type / spring type, 10A / 250 V, Insert
  
  [Features]
  ・CK/CKS.
  ・Small screw type / spring type.
  ▪ 10A/250 V insert

  Standard Price:	SGD 6.78-
  Days to Ship:	3 Day(s) or more

• 

  Discrete Wire Crimp Socket- XG5 (Discrete Wire Crimp Socket)

  OMRON

  [Features]
  ・A discrete wire crimped type has been added to the MIL connector series.
  ・ The XG5N-U socket with lock, which is unique to Omron, can be inserted and removed with one hand and securely locked.
  ・ Saves up to 24% (approximately) space (compared to XG4A).

  Standard Price:	SGD 0.45-
  Days to Ship:	Same day or more

• 

  EPIC® H-A 3 MTS【10 Pieces Per Package】

  LAPP

  The compact metal housing is ideal for use in control systems and for supplying power in restricted spaces.Innovative metal and plastic housing designSmall, rugged metal housingProtection rating UL50E tested

  Standard Price:	SGD 70.30-
  Days to Ship:	57 Day(s)

• 

  EPIC® MCR 16【5 Pieces Per Package】

  LAPP

  The frame systems enable to use various modules together in one housing, only the combination of pin frame and male pin contact.The mixed assembly guarantees high flexibility. For applications in mechanical and plant engineering, for printing machines and slide-in technology.Frame system for modulesVarious functions can be used together in one connector

  Standard Price:	SGD 60.40-
  Days to Ship:	57 Day(s)

• 

  Han Waterproof Single-Lever Pedestal Connector (for Relay Attachment)

  MISUMI

  Pedestal for Single-Lever Relay

  • Volume Discount

  • CE-Compliant
  • Connection between Boards
  • Lever Lock

  CAD ：

  2D

  Standard Price:	SGD 13.64-
  Days to Ship:	4 Day(s) or more

• 

  Low Cost Female MIL Connector Pressure Welding Contact Connector (without Lock)

  MISUMI

  MIL Connector, Female Pressure Welding Model (without Lock)

  • Volume Discount

  • MIL
  • For Signal
  • Pressure Welding

  Standard Price:	SGD 1.63-
  Days to Ship:	Same day

• 

  D-sub Connector, EMI-Countermeasure, One-touch, Resin Hood【1-2 Pieces Per Package】

  MISUMI

  [Features]A single-action hood that is easy to attach/remove. Can be attached/removed in a short time compared to screw tightening type. The pull-out force when locked is higher than that of the screw tightening type. Compatible with both straight and angled cable exits. Please use appropriate accessories according to the connection purpose.

  • Volume Discount

  • Space-saving
  • EMI Countermeasure
  • One-Touch Lock

  Standard Price:	SGD 2.39-
  Days to Ship:	3 Day(s) or more

• 

  Small Han Waterproof Connector

  MISUMI

  Han Module Mountable Compact Hood

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 14.69
  Days to Ship:	4 Day(s) or more

• 

  Pressure-welded/Press Contact D-Sub Connector

  MISUMI

  Pressure Welding model allows wires to be connected easily and strain-relieving mounting demonstrates strong tensile force

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • EMI Countermeasure
  • RS422
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 15.11-
  Days to Ship:	4 Day(s) or more

• 

  Solder and Press Contact PLC D-Sub Connector

  MISUMI

  Used with Mitsubishi Electric Q series which is highly trusted in Japan

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • EMI Countermeasure
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 6.36-
  Days to Ship:	3 Day(s) or more

• 

  EMI Countermeasure D-Sub Connector with Resin Hood (Low-profile/Angled)

  MISUMI

  Thin model with selectable cable drawing out direction and angle

  • Volume Discount

  • Space-saving

  CAD ：

  2D

  Standard Price:	SGD 6.29-
  Days to Ship:	4 Day(s) or more

• 

  MIL connector IDC female connector (no lock)

  MISUMI

  [Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

  • Volume Discount

  • UL
  • MIL
  • For Signal
  • Connection between Boards
  • Solenoid Valve
  • PLC
  • Pressure Welding
  • Gold Plated

  Standard Price:	SGD 3.12-
  Days to Ship:	3 Day(s) or more

• 

  Press-fit MIL Hooded Connector for Discrete Wires

  MISUMI

  [Features]OMRON's space saving connector hood made of glass-filled polyamide resin, dedicated to the XG5M. A hood for 20- to 60-core IDC female connectors. The cable exit is fixed with the included cable band, so set screws and tools are not required. 1 cable band is included for each hood set.

  • Volume Discount

  • Space-saving

  CAD ：

  2D

  Standard Price:	SGD 2.16-
  Days to Ship:	3 Day(s) or more

• 

  MIL Connector Female Crimped Housing (without Lock)

  MISUMI

  Highly reliable strong crimp model contact cable housing

  • Volume Discount

  • UL
  • MIL
  • Caulking

  CAD ：

  2D

  Standard Price:	SGD 1.63-
  Days to Ship:	Same day

• 

  MIL Connector PCB Angle Male Connector (Lever Model)

  MISUMI

  [Features]This is a lever-type, circuit board mount MIL male connector, manufactured by Hirose Electric. A 90° angled connector that can be mounted horizontally on the connector circuit board used for OMRON KEYENCE PLCs. It is suitable for installing circuit boards in narrow spaces. It is a highly versatile circuit board connector that can be mounted on commercially available universal circuit boards, etc., as the circuit board mounting hole pitch is 2.54 mm. The connector can be securely fixed due to the locking mechanism at the time of coupling.

  • Volume Discount

  • UL
  • MIL
  • For Signal
  • Space-saving
  • Solder
  • Gold Plated
  • Lever Lock

  CAD ：

  2D

  Standard Price:	SGD 3.28-
  Days to Ship:	Same day or more

• 

  FCN Extension Connector

  MISUMI

  Manufactured by Fujitsu Components. FCN hood for relay only.

  • Volume Discount

  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 6.08-
  Days to Ship:	3 Day(s) or more

• 

  Centronics Solder Screw-lock Connector (Panel Mountable Female)

  MISUMI

  Panel Mount Centronics Connector with Screw-lock

  • Volume Discount

  • Connection between Boards
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 30.50-
  Days to Ship:	4 Day(s) or more

• 

  MR Extension Hooded Connector

  MISUMI

  MR Hood for Relaying

  CAD ：

  2D

  Standard Price:	SGD 7.31-
  Days to Ship:	4 Day(s) or more

• 

  MR Vertical/Horizontal Dual Hooded Connector

  MISUMI

  For Vertical and Horizontal Dual-use MR Hood

  CAD ：

  2D

  Standard Price:	SGD 7.14-
  Days to Ship:	4 Day(s) or more

• 

  IEEE1284 Half Pitch EMI Countermeasure Press-fit Male Connector

  MISUMI

  High-speed Transfer Supporting Pressure Welding Half-pitch I/O Connector

  • Volume Discount

  • For Signal
  • PLC
  • Motor
  • EMI Countermeasure
  • SCSI
  • Pressure Welding
  • Gold Plated
  • Screw Lock
  • One-Touch Lock

  CAD ：

  2D

  Standard Price:	SGD 7.71-
  Days to Ship:	4 Day(s) or more

• 

  Han Waterproof Dual-Lever Base (Panel Mountable)

  MISUMI

  Pedestal for 2 Lever Model Panel Mounting

  • Volume Discount

  • CE-Compliant
  • Connection between Boards
  • Lever Lock

  CAD ：

  2D

  Standard Price:	SGD 40.95-
  Days to Ship:	4 Day(s) or more

• 

  HE Series, Universal Connector

  WEIDMULLER

  A 6-pole connector with multiple connection methods (500 V, 24 A, number of poles: 6 (+ PE), screw / spring / crimp / push-in)

  • Volume Discount

  Standard Price:	SGD 14.92-
  Days to Ship:	4 Day(s) or more

• 

  PCS Series

  HONDA TSUSHIN KOGYO

  Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors
  
  [Features]
  · Board to cable types available in 20 to 96 cores.
  • Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
  · Soldered types also available.
  ▪ For EMI measures other than FCC.
  • Built with a durable structure for use as an interface.
  · Quick lock using a metal lock spring.
  · Those for panel relays are also available.
  · Accessories for preventing incorrect insertion are also available.
  · A wide range of core numbers, from 34 to 150, are also available for board to board.
  • Specifically designed for smooth insertion and extraction, even when using multiple cores.
  • Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

  Standard Price:	SGD 5.47-
  Days to Ship:	Same day or more

• 

  MR Series Case

  HONDA TSUSHIN KOGYO

  Case for the MR series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  Standard Price:	SGD 4.21-
  Days to Ship:	Same day or more

• 

  1.25‑mm Pitch Low-Profile Type Crimp Connector, DF14 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 1.69-
  Days to Ship:	3 Day(s) or more

• 

  2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

  HIROSE ELECTRIC

  A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
  
  [Features]
  ・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
  ・Thin type: mount height when used at a right angle: 4.8 mm.
  ・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
  ・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
  ・Further, there are settings available to provide a light feel even if tin plating is used.

  Standard Price:	SGD 0.33-
  Days to Ship:	3 Day(s) or more

• 

  2 mm Pitch, Direct-To-Circuit Board Connector, DF4 Series

  HIROSE ELECTRIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  Standard Price:	SGD 0.25-
  Days to Ship:	3 Day(s) or more

• 

  3.5‑mm Pitch 2-Row Connector For Small Internal Power Supplies, MDF6 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 1.19-
  Days to Ship:	3 Day(s) or more

• 

  3.96 mm Pitch, Direct-To-Circuit Board Connector, DF6 Series

  HIROSE ELECTRIC

  Connector compatible with thick wire (AWG#18 - 22) for direct board-to-cable connection with 3.96-mm pitch. By lumping together and making into contacts, solder work is made possible and efficiency is increased.
  
  [Features]
  ・Work efficiency is increased.
  · By making prior thick wires one-by-one into a connector directly attached to the circuit board, lumping them together allows for a product that can be soldered.
  · Intended to increase the efficiency of solder work.
  · Small.
  · Miniaturization is carried out with an eye on thick wires.
  · Circuit board mounting height: 7.5mm.
  · Width dimension: 5.0 mm.
  · Temporary circuit board fastening mechanism.
  ・Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  Standard Price:	SGD 0.47
  Days to Ship:	3 Day(s) or more

• 

  Cover Case for HIF3B Series

  HIROSE ELECTRIC

  This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.

  Standard Price:	SGD 5.80-
  Days to Ship:	4 Day(s) or more

• 

  Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 6.83-
  Days to Ship:	4 Day(s) or more

• 

  Rack and Panel Connector, QR/P4 Series

  HIROSE ELECTRIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  Standard Price:	SGD 4.27
  Days to Ship:	4 Day(s) or more

• 

  Rack And Panel Connector, QR/P8 Series

  HIROSE ELECTRIC

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  Standard Price:	SGD 1.14-
  Days to Ship:	3 Day(s) or more

• 

  Small, Rectangular Interface Connector, 3200 Series

  HIROSE ELECTRIC

  This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.
  
  [Features]
  • A receptacle connector board implementation surface with a height of the 2.9 mm.
  • The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
  • This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
  • This receptacle connector can also be prepared in an embossed packaging product format.
  • This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
  • A latch lock is applied to both sides for mating processes.
  • This lock is implemented with the minimum space possible, and helps downsize your product set.
  • Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
  • The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
  • The number of pins available is either 8 or 10.

  Standard Price:	SGD 3.36-
  Days to Ship:	4 Day(s) or more

• 

  IL-AG5 Series

  JAPANAVIATION

  [Features]
  · Mechanical lock structure for secure mating.
  · The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
  · Unique housing structure.
  · The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
  · The double locking structure securely prevents contact dropout.
  · The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
  · The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
  · Standard, and differently shaped incorrect insertion prevention types are available.
  · The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
  · Contact featuring highly reliable design.
  · Box type, which is resilient to external effects such as deformation due to external forces.
  · Two-ply spring structure with excellent contact element characteristics.
  · The primary lance is on the inside of the contact provides horizontal insertion prevention.
  · Structure prevents reverse, horizontal insertion during housing mounting.

  Standard Price:	SGD 1.10-
  Days to Ship:	3 Day(s) or more

• 

  MX31 Series

  JAPANAVIATION

  The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
  
  [Features]
  [High-density implementation achieved with a large number of pins]
  · These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
  [Mechanical lock structure ensures secure fitting]
  · The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
  [Double locking structure reliably prevents loss of contact]
  · Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
  · The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
  [Low insertion force structure with easy insertion and extraction]
  · A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
  [Tin and gold plating are available for the contact finish]
  · The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
  [Misconfiguration-prevention types also available]
  · Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
  · Crimping enables easy connection.

  Standard Price:	SGD 2.74-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Miniature Delta Ribbon (MDR) System Non-Shielded Plug

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.
  · A bulk pressure welding structure—by proprietary 'hill & dale' method—on 0.635-mm pitch flat cable.
  · Compatible with daisy chain connections using intermediate pressure welding connection.
  · Low-profile design using strain relief—which also serves as a single-action lock.
  · Optimally suited for expanding bus signals by MDR within the device.

  Standard Price:	SGD 18.92-
  Days to Ship:	3 Day(s) or more

• 

  57E Series Noise Suppression Soldering Plug Connector

  DDK

  [Features]
  · 57E series connectors correspond to plugs of the 57 series 57-30 type (straight plug with cable hood) with noise suppression used to avoid the effects of interference.

  Standard Price:	SGD 21.80
  Days to Ship:	Same day

• 

  57GE Series Straight DIP Ribbon Receptacle.

  DDK

  [Features]
  ・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.
  ・Type 40 (receptacle for I/F).

  CAD ：

  2D

  Standard Price:	SGD 7.25-
  Days to Ship:	Same day or more

• 

  D-Sub Connector Assembly Hood with Side-Projecting Cable, XM2S

  OMRON

  [Features]
  · Projected cable type added to the popular D-sub connector assembly hood.
  · This opens up space that can be utilized in the back of the connector.
  · Cable is pulled out horizontally.
  · Effective noise suppression is achieved by a metalized plastic hood.

  Standard Price:	SGD 10.00-
  Days to Ship:	Same day

Loading...