Louvers

• 

  LP / Louver【2 Pieces Per Package】

  NITTO KOGYO

  Louver that is easy to install and convenient for ventilation inside the panel
  [Features]
  ・ You can effectively ventilate the inside of the board by natural ventilation.
  ・ With stainless steel wire mesh for insect-proof.
  · The filter can be washed and used again. (LP-F)
  ・ Made of AES resin
  ・ Installed indoors
  [Applications]
  ・ Ideal for indoor use and heat heat management

  CAD ：

  2D

  Standard Price:	SGD 34.86-
  Days to Ship:	Same day or more

• 

  Steel Louver【2 Pieces Per Package】

  MISUMI

  [Features]This is a low-cost steel louver (2 pcs. included). It is easy to attach because it is a bolt-on attachment type. It can be attached even after the housing such as the control panel is complete. You can choose from 3 colors. [Applications]Perfect for indoor use.

  • Volume Discount

  • Steel

  CAD ：

  2D

  Standard Price:	SGD 81.03-
  Days to Ship:	4 Day(s) or more

• 

  Ventilation Louver, for Outdoor Use

  KAMEDA DENKI

  Vent for switchboards, control panels, and cubicles. For outdoor use.
  
  [Features]
  · Insertable for simple installation.
  · A ventilation louver is inserted into the notch of the panel and a retention frame is mounted to the back using screws.
  · The rear hood is integrated with the mounting frame, so mounting is simple.
  · Insect screen and dustproof filter can be easily attached by a single knurled nut that has been newly developed, so maintenance and replacement are easy to perform.
  · Large opening area providing a beautiful finish.

  Standard Price:	SGD 102.98
  Days to Ship:	4 Day(s) or more

• 

  SLP / Large Louver

  NITTO KOGYO

  Large louvers for large cabinets
  [Features]
  ・ With filter (Made of polyester, dust removal rate 80%)
  · No tools are required to replace the filter.
  ・ Ventilation effect is enhanced when used in combination with a large louver with an exhaust fan.

  CAD ：

  2D

  Standard Price:	SGD 133.88-
  Days to Ship:	4 Day(s) or more

• 

  Steel / Stainless Steel Louver (Small)【2 Pieces Per Package】

  MISUMI

  [Features]A compact type louver made of steel / stainless steel (2 pcs. included). A 12 cm fan can be installed. Ideal for ventilation for control panels, etc. Stainless steel type added (2 types of surface treatment: brushed and mirror finish) [Applications] Ideal for indoor use.

  • Volume Discount

  • Steel
  • Stainless Steel

  CAD ：

  2D

  Standard Price:	SGD 69.04-
  Days to Ship:	4 Day(s) or more

• 

  RD44 / Filter Cassette with Ventilation Fan

  NITTO KOGYO

  Filter cassette with exhaust fan that is ideal for forced ventilation in the board
  [Features]
  ・ The filter can be reused by washing with water. (Made of 12 mm thick polyester, 80% dust removal rate)
  [Applications]
  ・ For temperature control of the control device (for heat management) (For indoor use)

  CAD ：

  2D

  Standard Price:	SGD 129.04-
  Days to Ship:	4 Day(s) or more

• 

  RSLP-K / R Louver with Ventilation Fan, with Filter

  NITTO KOGYO

  Louver with fan that allows for single-action mounting and features excellent design
  [Features]
  ・ It has an excellent effect on forced ventilation of the panel interior. Using it as a set with R-Type louvers is recommend.
  · No tools are required to replace the filter.
  ・ Considering recyclability, it is easy to separate and disassemble.
  [Applications]
  ・ For heat management of the panel interior (For indoor use)

  CAD ：

  2D

  Standard Price:	SGD 136.57-
  Days to Ship:	4 Day(s) or more

• 

  Louver with U-Shaped Hood

  JAPPY

  This is a louver which includes a U-shaped hood which prevents the entry of rain water.
  
  [Features]
  · A stainless steel outer wall vent for supplying natural ventilation.
  · There are 2 types of designs, one with a round hood and one with a U-shaped hood.
  · Different models with or without an insect screen and water guard can be selected based on the intended application.
  · Material properties include the use of highly corrosion-resistant SUS 304.

  Standard Price:	SGD 18.13
  Days to Ship:	4 Day(s) or more

• 

  GLP / Square Frame Round Louver【2 Pieces Per Package】

  NITTO KOGYO

  Round louver made of resin
  [Features]
  ・ It can be installed in the cabinet only by round hole processing.
  ・ With stainless steel wire mesh for insect-proof.
  ・ Since the cover can be removed, the filter can be replaced from the outside. (GLP-F)
  · The filter can be washed and used again. (GLP-F)
  [Applications]
  ・ Ideal for heat management and indoor use

  CAD ：

  2D

  Standard Price:	SGD 59.98-
  Days to Ship:	4 Day(s) or more

• 

  Round Louver (Resin)

  MISUMI

  [Features]A round louver with a resin filter. Equipped with a stainless steel insect-proof mesh. It can be easily attached by machining a round hole on the box. The filter can be replaced from the outside and can be washed for reuse.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 27.75
  Days to Ship:	4 Day(s) or more

• 

  Small Ventilation Louver (For Indoor Use)

  SHINOHARA ELECTRIC

  Used for ventilation of indoor control panels, panel boards, etc.
  
  [Features]
  · Can be installed directly on panels as before, with no hole drilling required.
  · Ventilation galleries can be installed afterward, reducing workload.
  · A 120mm square fan can also be installed (SG1-10-4)

  CAD ：

  2D

  Standard Price:	SGD 26.80-
  Days to Ship:	4 Day(s) or more

• 

  OLP / Louver with Hood【2 Pieces Per Package】

  NITTO KOGYO

  Resin louver with hood
  [Features]
  ・ Louver (LP) hooded type.
  ・ With stainless steel wire mesh for insect-proof.
  · The filter can be washed and used again. (OLP-F)
  ・ Material: AES resin
  ・ For both indoors/outdoors
  [Applications]
  ・ Ideal for heat heat management

  CAD ：

  2D

  Standard Price:	SGD 53.56-
  Days to Ship:	4 Day(s) or more

• 

  RSLP・R Series Louver with Filter【2 Pieces Per Package】

  NITTO KOGYO

  Single-action mounting louver with excellent design
  [Features]
  · No tools are required to replace the filter.
  ・ Considering recyclability, it is easy to separate and disassemble.
  ・ Ventilation effect is enhanced by using it as a set with a R-Type louver with a exhaust fan.
  [Applications]
  ・ For heat management
  ・ For indoor use

  CAD ：

  2D

  Standard Price:	SGD 105.11-
  Days to Ship:	4 Day(s) or more

• 

  Square Louver (Resin)

  MISUMI

  [Features]A square louver with resin filter. Equipped with a stainless steel insect-proof mesh. It can be easily attached by machining a round hole on the box. The filter can be replaced from the outside and can be washed for reuse.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 71.19-
  Days to Ship:	4 Day(s) or more

• 

  Gallery with Fan (stainless steel) IP45

  SHINOHARA ELECTRIC

  Gallery with fan that is usable outdoors.
  
  [Features]
  · Has a water repellent filter for a structure with superior waterproofing.
  · Can be mounted to panels with simple hexagonal machining.
  · Set includes fan finger guard and power supply cord.
  · Filter can be washed and reused.
  · Available in beige 5Y7/1 and cream 2.5Y9/1 colors.

  Standard Price:	SGD 388.61
  Days to Ship:	4 Day(s) or more

• 

  [RD43] filter cassette

  NITTO KOGYO

  For natural board ventilation. The filter can be washed and used again.
  [Specifications]
  ・ Filter: Made of 12 mm thick polyester, 80% dust removal rate
  ・ Coating color:
  Light beige paint LB (5Y7/1), JPMA J25-70B
  Cream-colored paint, cream-colored (2.5Y9/1), JPMA J22-90B
  ・ Installation location: IP4X for indoors
  [Accessories]
  · Mounting screws

  CAD ：

  2D

  Standard Price:	SGD 55.52-
  Days to Ship:	4 Day(s) or more

• 

  Gallery with Hood (for outdoor use: FG type), IPX4

  SHINOHARA ELECTRIC

  The hood helps it deal with wind and rain.
  
  [Features]
  - The hood mounted to the gallery provides wind and rain protection.
  - Simple installation.
  - Mount by snapping into the panel holes and screwing in the retention frame (retention board) from the underside.
  - Accessories like a blow prevention cover, insect screen and anti-dust filter provide the features needed for your applications.
  - (FG-15, FG-20 only.)
  - Can be included in a set with a salt filter.

  CAD ：

  2D

  Standard Price:	SGD 116.88-
  Days to Ship:	4 Day(s) or more

• 

  Blow-in Prevention Gallery, IP45

  SHINOHARA ELECTRIC

  Use the blow-in prevention gallery as a ventilation part for cubicles and switchboards in harsh outdoor conditions.
  
  [Features]
  - No ventilation holes need to be cut in large panels.
  - Retrofit this component on installed ventilation galleries.
  - The ventilation gallery and blow-in prevention cover are a single part, making it waterproof up to the JIS C 4602/JIS C 0920 standards (blow-in prevention tests).
  - Stainless steel ventilation galleries also available.

  CAD ：

  2D

  Standard Price:	SGD 159.73-
  Days to Ship:	4 Day(s) or more

• 

  WLP / Round Waterproof Louver【2 Pieces Per Package】

  NITTO KOGYO

  Louver made of high IP rated resin that can be used in outdoor cabinets
  [Features]
  ・ It can be installed in the cabinet only by round hole processing.
  ・ With stainless steel wire mesh for insect-proof.
  ・ Since the louver can be removed, the filter can be replaced from the outside.
  ・ The panel exhaust fan for the board can be retrofitted.
  [Applications]
  ・ For heat heat management, for both indoor and outdoor

  CAD ：

  2D

  Standard Price:	SGD 104.54-
  Days to Ship:	4 Day(s) or more

• 

  Free Aluminum Gallery (FAG Type) 1P × 2

  SHINOHARA ELECTRIC

  This aluminum ventilation gallery is designed to enable ventilation of cubicles, switchboards, etc.
  
  [Features]
  - Extra-long galleries can be produced to the customer's specifications.
  - It is not necessary to directly drill conventional ventilation holes into the panel.
  - This free aluminum gallery can be mounted from the rear as a separate component.
  - Ventilation efficiency is high without sacrificing opacity.
  - Light with no risk of rusting.

  Standard Price:	SGD 137.51-
  Days to Ship:	4 Day(s) or more

• 

  In-Wing Ventilation Gallery (Anti-Water Jet Type), IP45

  SHINOHARA ELECTRIC

  Use for ventilating operation boards, control panels, and cubicles. Large opening size.
  
  [Features]
  · Can secure an opening area of 148 cm2 using outdoor specifications for attaching blow prevention covers.
  · Significant labor savings are possible because, just as in the past, there is no need to put a vent in the panel.
  · Also, a breathing hole can easily be added.
  · Combines the rear gallery with anti-blow-in cover for strong waterproofing that can pass JISC4620/JISC0920 (anti-water jet) testing (IP45).
  · Stainless steel type also available (built to order)

  CAD ：

  2D

  Standard Price:	SGD 213.80-
  Days to Ship:	7 Day(s) or more

• 

  Plastic Gallery, PC Series

  SHINOHARA ELECTRIC

  Plastic galleries for control panels and instrument panels. The filter can be replaced from the front panel. (Plastic)
  
  [Features]
  · The task of installing has been streamlined by a simple one-touch mounting to the panel apertures.
  · The superior aesthetic appearance can enhance the commercial value of panels by sequential vertical/horizontal mounting.
  · The filter can be replaced by simply removing the front panel of the gallery.
  · 4.90 sq.mm, 120 sq.mm, and 160 sq.mm fans can be mounted.

  CAD ：

  2D

  Standard Price:	SGD 11.96
  Days to Ship:	4 Day(s) or more

• 

  SLP / Square Louver【2 Pieces Per Package】

  NITTO KOGYO

  Resin louver
  [Features]
  ・ With stainless steel wire mesh for insect-proof.
  · The filter can be washed and used again.
  ・ A fan can be attached. (Excluding SLP-2 and 2C)
  ・ AES resin
  [Applications]
  ・ For heat heat management, for indoors

  CAD ：

  2D

  Standard Price:	SGD 104.54-
  Days to Ship:	4 Day(s) or more

• 

  LP-K / Round Louver with Ventilation Fan, with Filter

  NITTO KOGYO

  Round louver with fan for use in indoor cabinets
  [Features]
  ・ Louver (LP) exhaust fan type.
  ・ Forced ventilation of indoor cabinets is possible.
  ・ Impedance protection prevents motor burnout.
  ・ It can be mounted on the cabinet only by round hole processing.
  ・ It can be easily installed without tools.
  ・ For indoor use
  [Applications]
  ・ Ideal for heat heat management

  CAD ：

  2D

  Standard Price:	SGD 137.15
  Days to Ship:	4 Day(s) or more

• 

  Cover with Round Hood

  JAPPY

  [Features]
  · A stainless steel outer wall vent for supplying natural ventilation.
  · There are 2 types of designs, one with a round hood and one with a U-shaped hood.
  • You can make a selection based on utilizations with or without insect protection nets or water stops.
  · Material properties include the use of highly corrosion-resistant SUS 304.

  Standard Price:	SGD 12.60-
  Days to Ship:	11 Day(s)

• 

  Louver For Wall Boxes

  MIRAI INDUSTRY

  [Features]
  · Optimal for discharging heat when mounting heat-generating equipment in wall boxes.
  · Can be mounted on wall box knockouts.　
  *Mounting in two or more locations is recommended.
  · Built-in filter prevents entry of rain water, dust, etc.

  Standard Price:	SGD 3.18
  Days to Ship:	7 Day(s) or more

• 

  Control Panel Filter【1-2 Pieces Per Package】

  MISUMI

  Dirt in filter is obvious. Significantly reduces the time and effort needed for filter replacement

  • Volume Discount

  Standard Price:	SGD 50.06-
  Days to Ship:	4 Day(s) or more

• 

  Jet Proof Type Louver (Resin Cover Type) IP45

  SHINOHARA ELECTRIC

  For ventilating cubicles and switchboards installed in harsh outdoor conditions. The protective plastic cover keeps the unit lightweight.
  
  [Features]
  - The plastic-resin rear anti-pull-in cover reduces weight and improves workability.
  - No paint required for the anti-pull-in cover, reducing costs.
  - Strong waterproofing that can pass JISC4620/JISC0920 anti-water jet testing (IP45).

  CAD ：

  2D

  Standard Price:	SGD 94.33-
  Days to Ship:	7 Day(s) or more

• 

  Louver V Series with Hood

  TAKACHI ELECTRONICS ENCLOSURE

  Louver (V) with hood
  
  [Features]
  · Optional part for box ventilation.
  - ABS types (V60, V80) compatible with BCAP and BCAK as well as polycarbonate types (V60S, V80S) compatible with BCPC and BCPK available.
  - Suitable for use with large boxes such as control panels.

  CAD ：

  2D

  Standard Price:	SGD 7.58-
  Days to Ship:	Same day or more

• 

  SLP-K / Ventilation Fan, SLP-K Model with Large Louver Filter Included

  NITTO KOGYO

  Large louver with exhaust fan
  [Features]
  ・ It has an excellent effect on forced ventilation of the panel interior. The manufacturer recommends using it as a set with a large louver.
  · No tools are required to replace the filter.
  ・ Rated Frequency: 50/60 Hz
  ・ Operating Temperature: －10 to +60℃
  ・ Material: AES resin
  ・ Installation location: For indoor use

  CAD ：

  2D

  Standard Price:	SGD 327.50
  Days to Ship:	6 Day(s) or more

• 

  [RSLP-ES] - Electromagnetic Shielded (EMC) Model R - Louver

  NITTO KOGYO

  This louver is designed to have natural ventilation and an effective shield.
  
  [Features]
  ▪ This louver is designed to have natural ventilation and an effective shield.
  · Tools not required to replace filter.
  · It can be easily separated and disassembled for recycling.

  CAD ：

  2D

  Standard Price:	SGD 169.74-
  Days to Ship:	6 Day(s) or more

• 

  [RSLP-KES] electromagnetic shield (EMC) specification round louver with exhaust fan

  NITTO KOGYO

  [Features]
  ·Design louver with exhaust fan with powerful ventilation and excellent shield effect.
  ·No tools are required to replace the filter.
  ·Easily dismantles and decomposes for excellent recyclability.

  CAD ：

  2D

  Standard Price:	SGD 467.57
  Days to Ship:	6 Day(s) or more

• 

  [SLP-ES] Electromagnetic Shield (EMC) Large Louver

  NITTO KOGYO

  This large louver has natural ventilation and an effective shield.
  
  [Features]
  ▪ This large louver has natural ventilation and an effective shield.
  · Tools not required to replace filter.

  CAD ：

  2D

  Standard Price:	SGD 253.67
  Days to Ship:	6 Day(s) or more

• 

  Ventilation Louver (Made Of Steel Plate & Stainless Steel)

  SHINOHARA ELECTRIC

  Use as a component for ventilation systems found on operation/control panels, switchboards, cubicles etc.
  
  [Features]
  · Using a ventilation louver means that there is no need to punch ventilation holes in panels as before, thereby helping make much more efficient use of space.
  Extremely easy to mount. Simply insert the ventilation louver from the front into the panel holes and then screw in the holding frame from the back.
  Available in different specifications for use in different applications. Select one or more accessories (blow-in protection cover, insect screen, dustproof filter etc.) depending on the intended application.
  Use the blow-in protection cover (structured so that blown-in rainwater flows back out) for outdoor use (IPX2).

  CAD ：

  2D

  Standard Price:	SGD 51.58-
  Days to Ship:	4 Day(s) or more

Loading...