(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead

CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead

[Features]
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
CXS4010-030
CXS4015-045
CXS4020-060
CXS4025-075
CXS4030-090
CXS4040-120
CXS4050-150
CXS4060-180
CXS4080-240
CXS4100-300
CXS4120-360
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
JAN Code Trusco Code Flute Diameter Tolerance
(mm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depending on Inclined Angle of Workpiece 1°30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

SGD 49.72

1 Piece(s) 9 Day(s) or more 11.54503--0~-0.020.9616°3.253.353.473.593.86

SGD 49.72

1 Piece(s) 4 Day(s) or more 1.52.254504.5--0~-0.021.4616°4.664.814.975.155.53

SGD 46.63

1 Piece(s) 4 Day(s) or more 234506--0~-0.021.9416°6.246.446.666.897.41

SGD 46.63

1 Piece(s) 4 Day(s) or more 2.53.754507.5--0~-0.022.4416°7.798.048.318.609.25

SGD 53.27

1 Piece(s) 7 Day(s) or more 34.56509--0~-0.022.9516°9.349.649.9710.3111.09

SGD 55.85

1 Piece(s) 4 Day(s) or more 4665012--0~-0.023.8616°12.6113.0213.4613.9214.97

SGD 59.84

1 Piece(s) 4 Day(s) or more 57.5650154560295082113485-28510~-0.024.8616°15.7016.2116.76No interferenceNo interference

SGD 64.27

1 Piece(s) 4 Day(s) or more 6965018--0~-0.025.86-No interferenceNo interferenceNo interferenceNo interferenceNo interference

SGD 79.02

1 Piece(s) 4 Day(s) or more 81286024--0~-0.037.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

SGD 93.81

1 Piece(s) 7 Day(s) 1015107030--0~-0.039.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

SGD 151.55

1 Piece(s) 7 Day(s) 1218129036--0~-0.0311.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Cast Iron / Titanium / Copper Number of flutes(sheet) 4 Type Long Neck Square
Machining Application Flat Surface / Side Surface / Groove / Inclined Cutting Blade tip shape With Lead Torsion Angle (θ) Standard Helix (30 to 40°)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)