(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Stainless Steel Hinge (Pinching Type)

Stainless Steel Hinge (Pinching Type)

Structural element of factory automation equipment. Main body material: stainless steel [SUS304], aluminum alloy [AL], polyvinyl chloride [PVC]. Surface treatment: base material spin finish. Mounting frame: M6/M8 type. Accessory parts: cross-head truss machine screw M3 × 6 (stainless steel). Dedicated bracket material: stainless steel [SUS304]. Surface treatment: glossy barrel finishing

PDF

Japanese Only

Part Number

Configured Part Number is shown.

DHS-3239

 
Part Number
DHS-3239
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHS

SGD 16.64

1 Piece(s) 4 Day(s) or more 10

Loading...

  1. 1

Basic Information

Type Flat Hinges Body Material Stainless steel [SUS304] Aluminum alloy [AL] Polyvinyl chloride [PVC] Surface Treatment Foundation Spin Finish
Allowable Load(N) For door loads of 40 or less Length(mm) 38.5 Width(mm) 21
Compatible Extrusion Selection M6 Type And M8 Type Attached Component Truss Small Screws Phillips Head M3 × 6 (Stainless Steel) Dedicated Bracket Material Stainless Steel (SUS304)
Surface Treatment of Dedicated Bracket Gloss barrel polishing

Please check the type/dimensions/specifications of the part DHS-3239 in the Stainless Steel Hinge (Pinching Type) series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)