(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Flare-Model Joint Double-Opening Flare Joint FS

Part Number

Configured Part Number is shown.

 
Part Number
FS-2006
FS-2008
FS-2010
FS-2012
FS-2015
FS-2022
FS-2033
FS-2044
FS-2055
FS-2066
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipApplicable Tube Size Type Nominal 1
(mm)
Nominal 1
(inch)
Applicable Pipe O.D. 1
(mm)

SGD 3.91

1 Piece(s) 4 Day(s) or more Copper Pipe mm size6-6

SGD 4.07

1 Piece(s) 4 Day(s) or more Copper Pipe mm size8-8

SGD 5.17

1 Piece(s) 4 Day(s) or more Copper Pipe mm size10-10

SGD 7.65

1 Piece(s) 7 Day(s) or more Copper Pipe mm size12-12

SGD 18.88

1 Piece(s) 7 Day(s) or more Copper Pipe mm size15-15

SGD 3.91

1 Piece(s) 4 Day(s) or more Copper Pipe inch size-1/46.35

SGD 5.17

1 Piece(s) 4 Day(s) or more Copper Pipe inch size-3/89.52

SGD 7.76

1 Piece(s) 4 Day(s) or more Copper Pipe inch size-1/212.70

SGD 18.88

1 Piece(s) 7 Day(s) or more Copper Pipe inch size-5/815.88

SGD 24.74

1 Piece(s) 7 Day(s) or more Copper Pipe inch size-3/419.05

Loading...

  1. 1

Basic Information

Type Fitting Material C3604BD Applicable Pipe Type Copper Pipe (Annealed Copper Pipe)
Applicable Fluid Water / Air / Oil Connection Type Pipe⇔Pipe, same diameters, plug-in type Connection Shape Straight Pipe⇔Screw(Union/Socket/Reducer.etc)
Fitting type Flare Fittings Material of Applicable Pipe Copper Max. Operating Pressure(MPa) 3.45
Surface Treatment No Operating Temperature Range(°C) -50::150 Divisions of Max. Operating Pressure(MPa) than 2.0Mpa

Frequently asked question (FAQ)

Question: What is the difference between the ring type and flare type?
Answer: Ring joints: Directly inserted into cut copper pipes and connected by tightening nuts. However, the pipe cut surface must be free of burrs.
Flare joints: After inserting the cut copper pipe into the nut, it is fastened to the main body with a joint expanded by a flaring tool, etc., at 45° into a flare (bell) shape.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)