(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Brass Tightening Fitting - Straight - for Sputtering Resistance

Brass Tightening Fitting - Straight - for Sputtering Resistance

Click this image to zoom it.

Move the mouse over the image to zoom

  • Brass Tightening Fitting - Straight - for Sputtering Resistance
  • Brass Tightening Fitting - Straight - for Sputtering Resistance
  • On Sale Till 31/03/2024

Special brass is used for metal body to greatly improve corrosion resistance to water.

[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

PDF

Japanese Only

Specifications Of All Brass Compression Fitting - Straight

Appearance of All Brass Compression Fitting - Straight

Appearance of All Brass Compression Fitting - Straight

Dimensional drawing of All Brass Compression Fitting - Straight

Dimensional drawing of All Brass Compression Fitting - Straight

Usable fluids: air, water, other*
Maximum operating pressure: depends on the maximum operating pressure of the tube
Operating vacuum pressure: -100 kPa
Operating temperature range: depends on the specification range of the tube (no freezing)

  • *For fluids other than air and water, compliance with the specifications may vary depending on usage conditions, so please check before using.
  • *When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
  • *The operating temperature range depends on the operating temperature of the tube that is used, but when used at high temperature, there is a risk of damage if an excessive load is applied to the main body.

Compatible Sizes

Millimeter Size (mm)ø4 × ø2.5, ø6 × ø4, ø8 × ø5, ø8 × ø6,
ø10 × ø6.5, ø10 × ø7.5, ø12 × ø8, ø12 × ø9,
ø16 × ø11, ø16 × ø13

Tube size (outer diameter × internal diameter)

Thread size
Taper pipe male thread: R1/8, R1/4, R3/8, R1/2
Taper pipe female thread: Rc1/8, Rc1/4, Rc3/8, Rc1/2

FormatTube Outer Diameter × Internal Diameter
øD
RABLECOpposite Side
H1
Opposite Side
H2
Effective Cross-Sectional Area
(mm2)
Mass
(g)
NKC0425-014 × 2.5R1/8821.517.510.55.581018.1
NKC0425-02R1/41125.519.51414
NKC0640-016 × 4R1/88221811610105.59.7
NKC0640-02R1/41126201416
NKC0640-03R3/8122821.71725
NKC0850-018 × 5R1/88242012712121014
NKC0850-02R1/41127211418
NKC0850-03R3/8122922.71727
NKC0860-018 × 6R1/88242012712121514
NKC0860-02R1/41127211418
NKC0860-03R3/8122922.71727
NKC1065-0210 × 6.5R1/41129.823.814.8916161529
NKC1065-03R3/81231.825.51736
NKC1065-04R1/21535.827.62157
NKC1075-0210 × 7.5R1/41129.823.814.8916162129
NKC1075-03R3/81231.825.51736
NKC1075-04R1/21535.827.62156
NKC1280-0212 × 8R1/41130.424.415.4917172630
NKC1280-03R3/81232.426.137
NKC1280-04R1/21536.428.22156
NKC1290-0212 × 9R1/41130.424.415.4917173530
NKC1290-03R3/81232.426.136
NKC1290-04R1/21536.428.22156
NKC1611-0316 × 11R3/81235.228.916.29.523235068
NKC1611-04R1/21538.23077
NKC1613-0316 × 13R3/81235.228.916.29.523237067
NKC1613-04R1/21538.23076

Units: mm

  • *L dimensions are reference dimensions after tightening with screws.
Part Number
NKC0425-01
NKC0425-02
NKC0640-01
NKC0640-02
NKC0640-03
NKC0850-01
NKC0850-02
NKC0850-03
NKC0860-01
NKC0860-02
NKC0860-03
NKC1065-02
NKC1065-03
NKC1065-04
NKC1075-02
NKC1075-03
NKC1075-04
NKC1280-02
NKC1280-03
NKC1280-04
NKC1290-02
NKC1290-04
NKC1611-03
NKC1611-04
NKC1613-03
NKC1613-04
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipNominal of Thread Tube Outer Dia.
(mm)
Tube Inner Dia.
(mm)

SGD 2.77

10 Piece(s) 11 Day(s) or more 1/842.5

SGD 3.11

10 Piece(s) 9 Day(s) or more 1/442.5

SGD 2.76

SGD 1.66

1 Piece(s) Same day 1/864

SGD 3.19

10 Piece(s) 4 Day(s) or more 1/464

SGD 3.57

10 Piece(s) 11 Day(s) or more 3/864

SGD 3.11

10 Piece(s) 11 Day(s) or more 1/885

SGD 3.32

10 Piece(s) 4 Day(s) or more 1/485

SGD 3.70

10 Piece(s) 9 Day(s) or more 3/885

SGD 3.09

1 Piece(s) Same day 1/886

SGD 3.12

SGD 2.25

1 Piece(s) Quote 1/486

SGD 3.70

10 Piece(s) 11 Day(s) or more 3/886

SGD 3.93

10 Piece(s) 9 Day(s) or more 1/4106.5

SGD 4.16

10 Piece(s) 9 Day(s) or more 3/8106.5

SGD 5.41

10 Piece(s) 9 Day(s) or more 1/2106.5

SGD 6.17

1 Piece(s) Same day 1/4107.5

SGD 4.10

1 Piece(s) 4 Day(s) or more 3/8107.5

SGD 5.41

10 Piece(s) 11 Day(s) or more 1/2107.5

SGD 4.26

10 Piece(s) 9 Day(s) or more 1/4128

SGD 4.39

10 Piece(s) 19 Day(s) or more 3/8128

SGD 5.53

10 Piece(s) 16 Day(s) or more 1/2128

SGD 6.00

10 Piece(s) 4 Day(s) or more 1/4129

SGD 5.53

10 Piece(s) 9 Day(s) or more 1/2129

SGD 6.23

10 Piece(s) 9 Day(s) or more 3/81611

SGD 6.56

10 Piece(s) 3 Day(s) or more 1/21611

SGD 6.23

10 Piece(s) 9 Day(s) or more 3/81613

SGD 6.56

10 Piece(s) 11 Day(s) or more 1/21613

Loading...

  1. 1

Basic Information

Connection Types Screw⇔Tube Connection Screw-to-Tube Connection Shape Male Straight Material Special Brass
Surface Treatment No Screw Types R

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)