(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Brass Tightening Coupler Elbow for Sputter Resistance

Brass Tightening Coupler Elbow for Sputter Resistance
  • On Sale Till 31/03/2024

Special brass is used for metal body to greatly improve corrosion resistance to water.

[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

PDF

Japanese Only

Specifications Of All Brass Compression Fitting - Elbow

Appearance of All Brass Compression Fitting - Elbow

Appearance of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Usable fluids: air, water, other*
Maximum operating pressure: depends on the maximum operating pressure of the tube
Operating vacuum pressure: -100 kPa
Operating temperature range: depends on the specification range of the tube (no freezing)

  • *For fluids other than air and water, compliance with the specifications may vary depending on usage conditions, so please check before using.
  • *When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
  • *The operating temperature range depends on the operating temperature of the tube that is used, but when used at high temperature, there is a risk of damage if an excessive load is applied to the main body.

Compatible Sizes

Millimeter Size (mm)ø4 × ø2.5, ø6 × ø4, ø8 × ø5, ø8 × ø6,
ø10 × ø6.5, ø10 × ø7.5, ø12 × ø8, ø12 × ø9,
ø16 × ø11, ø16 × ø13

Tube size (outer diameter × internal diameter)

Thread size
Taper pipe male thread: R1/8, R1/4, R3/8, R1/2
Taper pipe female thread: Rc1/8, Rc1/4, Rc3/8, Rc1/2

FormatTube Outer Diameter × Internal Diameter
øD
RAL1L2E1E2CHex
H1
Hex
H2
øP1øP2Effective Cross-Sectional Area
(mm2)
Mass
(g)
NKL0425-014 × 2.5R1/88181719.510.55.58810100.913
NKL0425-02R1/411192021.51417
NKL0640-016 × 4R1/8818.817201161081010415
NKL0640-02R1/41119.820221419
NKL0640-03R3/81221.721.523.510171329
NKL0850-018 × 5R1/8822.519.523127121014148.524
NKL0850-02R1/41121.525
NKL0850-03R3/81222.124.5171331
NKL0860-018 × 6R1/8822.519.523127121014141223
NKL0860-02R1/41121.525
NKL0860-03R3/81222.124.5171330
NKL1065-0210 × 6.5R1/41127.2242814.89161417171447
NKL1065-03R3/81226.951
NKL1065-04R1/21528.627.529.52166
NKL1075-0210 × 7.5R1/41127.2242814.89161417172047
NKL1075-03R3/81226.951
NKL1075-04R1/21528.627.529.52166
NKL1280-0212 × 8R1/41127.82428.515.49171417172448
NKL1280-03R3/81227.552
NKL1280-04R1/21529.227.5302167
NKL1290-0212 × 9R1/41127.82428.515.49171417172946
NKL1290-03R3/81227.550
NKL1290-04R1/21529.227.5302165
NKL1611-0316 × 11R3/81234.92831.516.29.5231723234592
NKL1611-04R1/21535.130101
NKL1613-0316 × 13R3/81234.92831.516.29.5231723235986
NKL1613-04R1/21535.13097

Units: mm

  • *L1 dimensions are reference dimensions after tightening with screws.
Part Number
NKL0425-01
NKL0425-02
NKL0640-01
NKL0640-02
NKL0640-03
NKL0850-01
NKL0850-02
NKL0850-03
NKL0860-01
NKL0860-02
NKL0860-03
NKL1065-02
NKL1065-03
NKL1065-04
NKL1075-02
NKL1075-03
NKL1075-04
NKL1280-02
NKL1280-03
NKL1280-04
NKL1290-02
NKL1290-03
NKL1290-04
NKL1611-03
NKL1611-04
NKL1613-03
NKL1613-04
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipNominal of Thread Tube Outer Dia.
(mm)
Tube Inner Dia.
(mm)

SGD 6.00

1 Piece(s) 4 Day(s) or more 1/842.5

SGD 6.23

10 Piece(s) 11 Day(s) or more 1/442.5

SGD 9.50

SGD 3.89

1 Piece(s) Same day 1/864

SGD 6.23

10 Piece(s) 11 Day(s) or more 1/464

SGD 6.79

10 Piece(s) 3 Day(s) or more 3/864

SGD 7.02

10 Piece(s) 8 Day(s) or more 1/885

SGD 7.15

10 Piece(s) 4 Day(s) or more 1/485

SGD 7.26

10 Piece(s) 9 Day(s) or more 3/885

SGD 10.87

SGD 4.13

1 Piece(s) Same day 1/886

SGD 6.99

1 Piece(s) 4 Day(s) or more 1/486

SGD 7.26

10 Piece(s) 11 Day(s) or more 3/886

SGD 7.95

10 Piece(s) 11 Day(s) or more 1/4106.5

SGD 8.07

10 Piece(s) 9 Day(s) or more 3/8106.5

SGD 8.18

10 Piece(s) 9 Day(s) or more 1/2106.5

SGD 7.77

1 Piece(s) 4 Day(s) or more 1/4107.5

SGD 12.57

1 Piece(s) 4 Day(s) or more 3/8107.5

SGD 8.18

10 Piece(s) 11 Day(s) or more 1/2107.5

SGD 8.18

10 Piece(s) 9 Day(s) or more 1/4128

SGD 8.31

10 Piece(s) 9 Day(s) or more 3/8128

SGD 8.41

10 Piece(s) 9 Day(s) or more 1/2128

SGD 12.74

1 Piece(s) 4 Day(s) or more 1/4129

SGD 8.11

1 Piece(s) 4 Day(s) or more 3/8129

SGD 8.41

10 Piece(s) 16 Day(s) or more 1/2129

SGD 10.15

10 Piece(s) 12 Day(s) or more 3/81611

SGD 10.49

10 Piece(s) 9 Day(s) or more 1/21611

SGD 10.15

10 Piece(s) 9 Day(s) or more 3/81613

SGD 10.49

10 Piece(s) 9 Day(s) or more 1/21613

Loading...

  1. 1

Basic Information

Connection Types Screw⇔Tube Connection Screw-to-Tube Connection Shape Elbow Material Special Brass
Surface Treatment No Screw Types R

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)