(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
[Features]
·High-speed steel roughing uncoated long flute length type with optimum pitch width for coarse finishing
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Non-Coated
- 4 Flutes
- L (Long)
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| RFEML10 |
| RFEML12 |
| RFEML14 |
| RFEML15 |
| RFEML16 |
| RFEML18 |
| RFEML20 |
| RFEML22 |
| RFEML25 |
| RFEML28 |
| RFEML30 |
| RFEML32 |
| RFEML35 |
| RFEML40 |
| RFEML45 |
| RFEML50 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Processing Applications | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Corner Chamfering C (mm) | Tolerance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 43.69 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 45 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 10 | 95 | - | ±0.075 | |
SGD 55.71 | 1 Piece(s) | Available | 4 Day(s) or more | 12 | 53 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 12 | 110 | 0.2 ~ 0.5 | ±0.090 | |
SGD 61.87 | 1 Piece(s) | Available | 4 Day(s) or more | 14 | 53 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 12 | 110 | 0.2 ~ 0.5 | ±0.090 | |
SGD 66.19 | 1 Piece(s) | Available | 4 Day(s) or more | 15 | 53 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 12 | 110 | 0.2 ~ 0.5 | ±0.090 | |
SGD 70.06 | 1 Piece(s) | Available | 4 Day(s) or more | 16 | 63 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 16 | 123 | 0.3 ~ 0.7 | ±0.090 | |
SGD 73.75 | 1 Piece(s) | Available | 4 Day(s) or more | 18 | 63 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 16 | 123 | 0.3 ~ 0.7 | ±0.090 | |
SGD 82.83 | 1 Piece(s) | Available | 4 Day(s) or more | 20 | 75 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 20 | 141 | 0.3 ~ 0.7 | ±0.105 | |
SGD 106.82 | 1 Piece(s) | Available | 4 Day(s) or more | 22 | 75 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 20 | 141 | 0.3 ~ 0.7 | ±0.105 | |
SGD 120.14 | 1 Piece(s) | Available | 4 Day(s) or more | 25 | 90 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | 25 | 166 | 0.3 ~ 0.7 | ±0.105 | |
SGD 151.52 | 1 Piece(s) | Available | 4 Day(s) or more | 28 | 90 | 5 | Flat Surface / Side Surface / Groove / Inclined Cutting | 25 | 166 | 0.3 ~ 0.7 | ±0.105 | |
SGD 162.28 | 1 Piece(s) | Available | 4 Day(s) or more | 30 | 90 | 5 | Flat Surface / Side Surface / Inclined Cutting | 25 | 166 | 0.3 ~ 0.7 | ±0.105 | |
SGD 206.52 | 1 Piece(s) | Available | 4 Day(s) or more | 32 | 106 | 6 | Flat Surface / Side Surface / Inclined Cutting | 32 | 186 | 0.3 ~ 0.7 | ±0.107 | |
SGD 257.41 | 1 Piece(s) | Available | 4 Day(s) or more | 35 | 106 | 6 | Flat Surface / Side Surface / Inclined Cutting | 32 | 186 | 0.3 ~ 0.7 | ±0.107 | |
SGD 354.83 | 1 Piece(s) | Available | 4 Day(s) or more | 40 | 125 | 6 | Flat Surface / Side Surface / Inclined Cutting | 32 | 205 | 0.3 ~ 0.7 | ±0.107 | |
SGD 484.51 | 1 Piece(s) | Available | 4 Day(s) or more | 45 | 125 | 6 | Flat Surface / Side Surface / Inclined Cutting | 42 | 227 | 0.3 ~ 0.7 | ±0.107 | |
SGD 559.27 | 1 Piece(s) | Available | 4 Day(s) or more | 50 | 150 | 6 | Flat Surface / Side Surface / Inclined Cutting | 42 | 252 | 0.3 ~ 0.7 | ±0.107 |
Loading...
Specifications
Model Number
RFEML
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Under Neck Angle θ |
Shank Diameter d |
Corner Chamfering C |
Number of Flutes Z |
| 10 | 45 | 95 | — | 10 | — | 4 |
| 12 | 53 | 110 | — | 12 | 0.2 ~ 0.5 | 4 |
| 14 | 53 | 110 | — | 12 | 0.2 ~ 0.5 | 4 |
| 15 | 53 | 110 | — | 12 | 0.2 ~ 0.5 | 4 |
| 16 | 63 | 123 | — | 16 | 0.3 ~ 0.7 | 4 |
| 18 | 63 | 123 | — | 16 | 0.3 ~ 0.7 | 4 |
| 20 | 75 | 141 | — | 20 | 0.3 ~ 0.7 | 4 |
| 22 | 75 | 141 | — | 20 | 0.3 ~ 0.7 | 4 |
| 25 |
90 |
166 | — | 25 | 0.3 ~ 0.7 | 4 |
| 28 |
90 |
166 | — | 25 | 0.3 ~ 0.7 | 5 |
| 30 |
90 |
166 | — | 25 | 0.3 ~ 0.7 | 5 |
| 32 |
106 |
186 | — | 32 | 0.3 ~ 0.7 | 6 |
| 35 |
106 |
186 | — | 32 | 0.3 ~ 0.7 | 6 |
| 40 |
125 |
205 | — | 32 | 0.3 ~ 0.7 | 6 |
| 45 |
125 |
227 | — | 42 | 0.3 ~ 0.7 | 6 |
| 50 |
150 |
252 | — | 42 | 0.3 ~ 0.7 | 6 |
For Cutting Conditions, Refer to >>Click here.
Basic Information
| Work Material | General Steel / Cast Iron / Aluminum / Copper | Type of Flute | Roughing | Tool Material Type | Cobalt High-Speed Steel |
|---|---|---|---|---|---|
| Coating | Non-Coated | Torsion Angle (θ) | Standard Helix (30 to 40°) | Base-Blade Availability | Included |
Specification/Dimensions
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
type
- RFEML
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?