(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Slim Press-fit Connector

Slim Press-fit Connector

Click this image to zoom it.

Move the mouse over the image to zoom

Slim Model Pressure Welding Connector Used

  • Space-saving
  • PLC
  • Pressure Welding
  • Gold Plated
  • Small Diameter

● Cable that uses FCN360 connector. Uses an 8.3 mm thin pressure welding model connector for easy wiring in narrow spaces.
● Wiring is easy thanks to cables with diameter thinness 35% that of conventional cables.


· Pressure weld protective tubes are mounted only on 24 or 40 core models.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· The shield holds the lead wire.


Wiring and Wire Color Page
>>Click here
Component Page
>>Click here

PDF

Specifications

Slim Press-fit Connector:Related Image

Specified Length (m)~ 0.91 ~ 44.1 ~ 50
Tolerance+20mm+50mm+ 3% of Specified Length
* The tolerance of the specified length is as described above.

Connector TypeShape Specification TypeOutline Image Drawing (Unit: mm)Cable TypeNumber of CoresSpecified Length (m)
NFCN
Pressure Welding Type Connector
M2.6 Screw
Lock Type

FUJITSU Component
S-ID
(Female)
Slim Press-fit Connector:Related ImageSlim Press-fit Connector:Related Image

Slim Press-fit Connector:Related Image

Slim Press-fit Connector:Related Image

Slim Press-fit Connector:Related Image

Slim Press-fit Connector:Related Image
240.2
~
50

Can be specified by 0.1m
increments




FF only
0.5
~
5.0

Can be specified by 0.1m
increments
32
40
48
SS-ID
(Female / Female)
Slim Press-fit Connector:Related Image24
32
40
48
SY-ID
(Female / Y Terminal)
With Pin No. Insertion
Mark Tube
Slim Press-fit Connector:Related Image
Slim Press-fit Connector:Related Image
If Stripping Entire Sheath (FF)
24
32
40
48
ST-ID
(Female / Loose Wires)
With Pin No. Insertion
Mark Tube
Slim Press-fit Connector:Related Image
Slim Press-fit Connector:Related Image
If Stripping Entire Sheath (FF)
24
32
40
48
Part Number
NFCN-S-ID-E-24-[0.2-50/0.1]
NFCN-S-ID-E-32-[0.2-50/0.1]
NFCN-S-ID-E-40-[0.2-50/0.1]
NFCN-S-ID-F-24-[0.2-50/0.1]
NFCN-S-ID-F-32-[0.2-50/0.1]
NFCN-S-ID-F-40-[0.2-50/0.1]
NFCN-S-ID-F-48-[0.2-50/0.1]
NFCN-S-ID-SB-24-[0.2-50/0.1]
NFCN-S-ID-SB-32-[0.2-50/0.1]
NFCN-S-ID-SB-40-[0.2-50/0.1]
NFCN-S-ID-SB-48-[0.2-50/0.1]
NFCN-SS-ID-E-24-[0.2-50/0.1]
NFCN-SS-ID-E-32-[0.2-50/0.1]
NFCN-SS-ID-E-40-[0.2-50/0.1]
NFCN-SS-ID-F-24-[0.2-50/0.1]
NFCN-SS-ID-F-32-[0.2-50/0.1]
NFCN-SS-ID-F-40-[0.2-50/0.1]
NFCN-SS-ID-F-48-[0.2-50/0.1]
NFCN-SS-ID-SB-24-[0.2-50/0.1]
NFCN-SS-ID-SB-32-[0.2-50/0.1]
NFCN-SS-ID-SB-40-[0.2-50/0.1]
NFCN-SS-ID-SB-48-[0.2-50/0.1]
NFCN-ST-ID-E-24-[0.2-50/0.1]
NFCN-ST-ID-E-32-[0.2-50/0.1]
NFCN-ST-ID-E-40-[0.2-50/0.1]
NFCN-ST-ID-F-24-[0.2-50/0.1]
NFCN-ST-ID-F-32-[0.2-50/0.1]
NFCN-ST-ID-F-40-[0.2-50/0.1]
NFCN-ST-ID-F-48-[0.2-50/0.1]
NFCN-ST-ID-SB-24-[0.2-50/0.1]
NFCN-ST-ID-SB-32-[0.2-50/0.1]
NFCN-ST-ID-SB-40-[0.2-50/0.1]
NFCN-ST-ID-SB-48-[0.2-50/0.1]
NFCN-SY-ID-E-24-[0.2-50/0.1]
NFCN-SY-ID-E-32-[0.2-50/0.1]
NFCN-SY-ID-E-40-[0.2-50/0.1]
NFCN-SY-ID-F-24-[0.2-50/0.1]
NFCN-SY-ID-F-32-[0.2-50/0.1]
NFCN-SY-ID-F-40-[0.2-50/0.1]
NFCN-SY-ID-F-48-[0.2-50/0.1]
NFCN-SY-ID-SB-24-[0.2-50/0.1]
NFCN-SY-ID-SB-32-[0.2-50/0.1]
NFCN-SY-ID-SB-40-[0.2-50/0.1]
NFCN-SY-ID-SB-48-[0.2-50/0.1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipCN2 Number Of Cores Cable rated voltage
(V)
Shield Cable color Cable type Specified Length
(M)

-

1 Piece(s) 5 Day(s) or more Cut off243001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off323001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off403001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off243001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off323001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off403001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off483001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off24302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off32302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off40302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Cut off48302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female243001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female323001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female403001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female243001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female323001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female403001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female483001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female24302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female32302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female40302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Female48302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire243001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire323001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire403001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire243001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire323001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire403001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire483001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire24302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire32302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire40302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Discrete wire48302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal243001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal323001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal403001 LayerNavyE0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal243001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 6 Day(s) or more Y terminal323001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal403001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal483001 LayerNavyF0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal24302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal32302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal40302 LayerBlackSB0.2 ~ 50

-

1 Piece(s) 5 Day(s) or more Y terminal48302 LayerBlackSB0.2 ~ 50

Loading...

  1. 1

Compatible Wire

Connector Type Wire Size
Soldered Type Loose wire of AWG23 ~ AWG30, or 0.2 mm2 ~ 0.05 mm2
Pressure Welding Type 1.27 mm Pitch Flat Cable AWG28, AWG30
* Loose wires cannot be used. (Fused cables can be used)

Material / Finish

Item Material / Finish
Insulator Polyester
Contact Copper Alloy / Gold Plating

Contact Arrangement Diagram


Electrical Properties

Item Characteristics Conditions
Rated Current 3 ADC (1 ADC for pressure welded type) or lower Allowable current of single contact after coupling
Rated Voltage 250 VAC or less Allowable voltage within operating temperature range
Contact Resistance 15 mΩ or less Measured at 6 VDC, 0.3 A
Insulation Resistance 1000 MΩ or more Between terminals and between ground & terminal are measured at 500 VDC
Withstand Voltage 500 VAC / 1 min No abnormality to be found when 500 VDC is applied for 1 minute to the same location as the insulation resistance measurement.
Operating Temperature Range -55°C ~ +85°C -

Electrical Properties

Item Characteristics Conditions
Insertion and Extraction Force Per Single Pole Insertion Force: 312 g or less, Extraction Force: 50 g or more When male and female are inserted and extracted, the total extraction force is divided by each core number to convert into force per single pole
Vibration Resistance No interruption to power supplies of 1 μs or more. Matching contact resistance. After mounting of compatible electric wires, under conditions of DC current of 100 mA passing through the terminals, it will provide vibrations at a total amplitude of 1.5 mm and
vibration frequency of 10 ~ 55 Hz (1 minute reciprocal) in right angled 3 directions for 2 hours.
Insertion and Removal Durability Contact resistance at 20 mΩ or less. Matching insertion and extraction force per single pole. Perform insertion-extraction 500 times at a speed of 600 times / hour.

Environmental Properties

Item Characteristics Conditions
Temperature Resistance Matching contact resistance, insulation resistance and withstand voltage. Performs 5 cycles of -55°C ±0.3 for 30 minutes, 25°C ±10.5 for 10 ~ 15 minutes, 85°C ±0.3 for 30 minutes and 25°C ±10.5 for 10 ~ 15 minutes consecutively.
Humidity Resistance Matching contact resistance of 100 MΩ or more, insulation resistance and withstand voltage. Remove after placing in conditions of temperature 40 ±2°C and relative humidity of 90 ~ 95% for 96 hours, remove water droplets and then leave at room humidity conditions for between 1 and 2 hours.
Corrosion Resistance Contact resistance at 20 mΩ or less. After testing for 48 hours at saltwater concentration of 5% and temperature of 35°C, wash salt encrustation off with water and let dry.

Connector x Hood Combination Table

Hood Connector Resin Hood Zinc Die-cast Hood
Standard Screw Long Screw Hood for Relay
FCN-360C0**-B FCN-360C0**-E FCN-360C0**-C FCN-360C040-H-E
Male Solder Type Connectors FCN-361P0**-AU ○ (8-, 16-core not available) ○ (8-, 16-core not available) ○ (40-core only)
Female Solder Type Connectors FCN-361J0**-AU ○ (8-, 16-core not available) ○ (8-, 16-core not available) ○ (40-core only)
Pressure Welding Type Connector FCN-367J0**-AU-F x x x x
○ = Combination available x = Combination unavailable
・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.
・ When connecting hood to hood without using a relay hood, use a connecting fixing bracket.

Basic Information

Connector type FCN Connector manufacturer Fujitsu Connector Shape Straight
Machining Method Pressure welding Cable shape Circular Hood None
Hood screw M2.6 screw lock CN1 Female Cable standard (UL/CSA) UL
Twisted pair Included AWG 28 Environment resistant N/A
Bend tolerant N/A

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)