(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Solder and Machine Contact D-Sub Connector (High Current)

Solder and Machine Contact D-Sub Connector (High Current)

Click this image to zoom it.

Move the mouse over the image to zoom

  • Solder and Machine Contact D-Sub Connector (High Current)
  • Solder and Machine Contact D-Sub Connector (High Current)
  • Solder and Machine Contact D-Sub Connector (High Current)
  • Volume Discount

Made by ERNI in Germany. High-current capacity model supporting up to 20 A

  • For Power Supply
  • Connection between Boards
  • Solder
  • Gold Plated
  • Screw Lock

● High current can be used by utilizing the Dsub connector housing.
● Either 10A or 20A contacts can be selected.
● The dedicated hood is an EMI-countermeasure product that is equipped with an internal shield plate.


Compatible Electric Wire Size:For 10A: AWG22 – 16 or 0.3 – 1.25mm2
For 20A: AWG18 – 12 or 0.75 – 3.5mm2

PDF

Japanese Only

Specifications

Solder and Machine Contact D-Sub Connector (High Current):Related Image

Solder Type Contact
1 Pack Unit With Total of 10

Model NumberRating
Current
Type
594-22110AMale
(Pin)
594-22320A
594-17210AFemale
(Socket)
594-17420A

Connector Housing
Model NumberNumber of CoresType
E-DSUB3M3Male
(Pin)
E-DSUB5M5
E-DSUB8M8
E-DSUB3F3Female
(Socket)
E-DSUB5F5
E-DSUB8F8

Hood
Model NumberNumber of Cores
063-3883
063-3875
063-3868

More Information

Solder and Machine Contact D-Sub Connector (High Current):Related Image

Electrical Properties
Connector Housing

Withstand Voltage1,000 VAC / minute
Insulation Resistance10,000 MΩ
Operating Temperature Range-55°C ~ +125°C
Solder Type Contact
Rated Current594-221, 594-172Below 10A
594-223, 594-174Below 20A
Rated Voltage125 VAC or less
Contact Resistance1 mΩ or less
Insertion and Removal Life500 times or more
 
Material / Finish
Connector Housing
ItemMaterialsFinish
InsulatorPBTGreen or White
ShellSteelNickel-plated
Solder Type Contact
 MaterialsFinish
Male (Pin)BrassGold Plate
Female (Socket)Beryllium Copper

Part Number
063-386
063-388
E-DSUB3F
E-DSUB5F
E-DSUB5M
E-DSUB8F
E-DSUB8M
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipApplicable pin/contact Number of Pins Application Allowable Current
(A)
Allowable Voltage
(V)
Wire connection method Connection direction Maximum Voltage
(Vr.m.s)
Removal method

SGD 19.08

1 Piece(s)Available 4 Day(s) or more -8-------

SGD 16.98

1 Piece(s)Available 4 Day(s) or more -3-------

SGD 7.35

1 Piece(s)Available 4 Day(s) or more Female (socket)3Cable to Circuit Board10 ~ 20125SolderStraight1000Others

SGD 9.07

1 Piece(s)Available 4 Day(s) or more Female (socket)5Cable to Circuit Board10 ~ 20125SolderStraight1000Others

SGD 9.10

1 Piece(s)Available 4 Day(s) or more Male (plug)5Cable to Circuit Board10 ~ 20125SolderStraight1000Others

SGD 11.97

1 Piece(s)Available 4 Day(s) or more Female (socket)8Cable to Circuit Board10 ~ 20125SolderStraight1000Others

SGD 11.95

1 Piece(s)Available 4 Day(s) or more Male (plug)8Cable to Circuit Board10 ~ 20125SolderStraight1000Others

Loading...

  1. 1

 

Compatible Wire Size

Connector TypeCompatible Wire Size
AWG SizeConductor Cross-Sectional Area (mm2)
Solder Connection TypeFiner than 20Less than 0.53
Pressure Weld Connection Type1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type22 ~ 280.08 ~ 0.32
Terminal Block Built in Type14 ~ 262.0 ~ 1.5
High Current TypeFor 10A16 ~ 120.3 ~ 1.25
For 20A12 ~ 180.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of CoresA±0.15B±0.2C±0.2
High Current TypeHigh-density typeOthers
-15924.9920.612.0
3261533.3228.812.0
5442547.0442.612.0
8623763.5059.012.0
-785061.1156.615.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of CoresA1B1
924.9922.00
1533.3230.30
2547.0444.00
3763.0560.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of CoresA2B2
924.9920.20
1533.3228.60
2547.0442.50
3763.0559.20

Contact Arrangement Diagram

Shell Size GroupEABCD
Standard Type
High-density type

Basic Information

Connector Shape Square shape Connector series initials D/E/F D/E/F Dsub
Protection function (environmentally resistant) None

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)