(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats

Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats

"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

Hollow with Wrench Flats/Both Ends Tapped:Related Image
[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> P.111
[ ! ]Features of Low Temp. Black Chrome Plating
 >>P.128
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 15mm from wrench flats machined ends.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111 
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Annealing required for wrench flats machining and shaft end threading (effective thread length + approx. 10mm) may lower hardness. >>P.112
Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
Both Ends TappedBoth Ends Tapped with Wrench Flats
SPJWSPWRSUJ2 EquivalentEffective Hardened Depth of Induction Hardened >>P.112
SUJ2 Equivalent        58HRC~
SUS440C or 13Cr stainless 56HRC~
-
SSPJWSSPWRSUS440C or 13Cr stainless
PSPJWPSPWRSUJ2 EquivalentHard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
RSPJWRSPWRSUJ2 EquivalentLow Temp. Black Chrome Plating

Specifications

• Both Ends Tapped Hollow Shafts
Part Number-L-M-N-SC
SPJW20
SPWR30
-
-
500
680
-
-
M16
M20
-
-
N16
N20

-

SC10
■Both Ends Tapped Hollow Shafts
Part NumberL
1mm Increment
M (Coarse Thread)
N (Coarse Thread)
D Tol.dC
TypeD
Both Ends Tapped Hollow Shafts
SPJW
SSPJW (* marked sizes only)
PSPJW
620~6003    -0.004
-0.012
20.5 or Less
*820~800 (300)4*5   -0.005
-0.014
3(3)0.5 or Less
*1020~800 (400)5*6   -0.005
-0.014
4(4)0.5 or Less
*1232~1000 (500) *8*T1 (RC1/8)-0.006
-0.017
6(5)0.5 or Less
*1340~1000 (500) *10*T1 (RC1/8)-0.006
-0.017
7(5)0.5 or Less
*1648~1200 (600) *12*T2 (RC1/4)-0.006
-0.017
10(6)0.5 or Less
*2064~1200 (800) *16*T3 (RC3/8)-0.007
-0.020
14(8)1.0 or Less
*2580~1200 (1000) *20   -0.007
-0.020
16(10)1.0 or Less
*3080~1500 (1000) *20   -0.007
-0.020
17(12)1.0 or Less
3596~1500  24  -0.009
-0.025
191.0 or Less
4096~1500  2430 -0.009
-0.025
201.0 or Less
50120~1500   30 -0.009
-0.025
261.0 or Less

Part NumberL
1mm Increment
M (Coarse Thread)
N (Coarse Thread)
D Tol.dC
TypeD
Both Ends Tapped Hollow Shafts
Low Temp. Black Chrome Plating
RSPJW
620~5003    -0.004
-0.012
20.5 or Less
820~50045   -0.005
-0.014
30.5 or Less
1020~50056   -0.005
-0.014
40.5 or Less
1232~500 8T1 (RC1/8)-0.006
-0.017
60.5 or Less
1340~500 10T1 (RC1/8)-0.006
-0.017
70.5 or Less
1648~500 12T2 (RC1/4)-0.006
-0.017
100.5 or Less
2064~500 16T3 (RC3/8)-0.007
-0.020
141.0 or Less
2580~500 20   -0.007
-0.020
161.0 or Less
3080~500 20   -0.007
-0.020
171.0 or Less
Part NumberL
1mm Increment
M (Coarse Thread), N (Coarse Thread)Wrench Flats DimensionsD Tol.dC
TypeDSCW1
Both Ends Tapped Hollow Shafts
with Wrench Flats
SPWR
SSPWR (* marked sizes only)
PSPWR
620~6003    SC=1mm Increment
[ ! ]When D≤25
SC+1≤L-Nx2
SC≥Mx2
[ ! ]When D≥30
SC+1≤L
SC≥0


[ ! ]
Details of Wrench Flats
  P.112
58-0.004
-0.012
20.5 or Less
* 820~800 (300)4* 5   78-0.005
-0.014
3 (3)0.5 or Less
* 1020~800 (400)5* 6   88-0.005
-0.014
4 (4)0.5 or Less
* 1232~1000 (500) * 8*T1 (RC1/8)1010-0.006
-0.017
6 (5)0.5 or Less
* 1340~1000 (500) * 10*T1 (RC1/8)1110-0.006
-0.017
7 (5)0.5 or Less
* 1648~1200 (600) * 12*T2 (RC1/4)1410-0.006
-0.017
10 (6)0.5 or Less
* 2064~1200 (800) * 16*T3 (RC3/8)1710-0.007
-0.020
14 (8)1.0 or Less
* 2580~1200 (1000) * 20   2210-0.007
-0.020
16 (10)1.0 or Less
* 3080~1500 (1000) * 20   2715-0.007
-0.020
17 (12)1.0 or Less
3596~1500  24  3015-0.009
-0.025
191.0 or Less
4096~1500  2430 3620-0.009
-0.025
201.0 or Less
50120~1500   30 4120-0.009
-0.025
261.0 or Less

Part NumberL
1mm Increment
M (Coarse Thread), N (Coarse Thread)Wrench Flats DimensionsD Tol.dC
TypeDSCW1
Both Ends Tapped Hollow Shafts
with Wrench Flats
Low Temp. Black Chrome Plating
RSPWR
620~5003    SC=1mm Increment
[ ! ]When D≤25
SC+1≤L-Nx2
SC≥Mx2
[ ! ]When D≥30
SC+1≤L
SC≥0


[ ! ]
Details of Wrench Flats
  P.112
58-0.004
-0.012
20.5 or Less
820~50045   78-0.005
-0.014
30.5 or Less
1020~50056   88-0.005
-0.014
40.5 or Less
1232~500 8T1 (RC1/8)1010-0.006
-0.017
60.5 or Less
1340~500 10T1 (RC1/8)1110-0.006
-0.017
70.5 or Less
1648~500 12T2 (RC1/4)1410-0.006
-0.017
100.5 or Less
2064~500 16T3 (RC3/8)1710-0.007
-0.020
141.0 or Less
2580~500 20   2210-0.007
-0.020
161.0 or Less
3080~500 20   2715-0.007
-0.020
171.0 or Less
[ ! ]When T1, T2 or T3 is selected as M or N, tapered thread machining is applied. (Ordering Code: MT1, NT1) [ ! ]L requires Mx2+Nx2≤L.
[ ! ]When Mx25+4+Nx2.5+4≤L, tap pilot holes may go through. [ ! ]When L≤Mx2+Nx2, effective depth of larger diameter tap has priority.
[ ! ]Only * marked D, M and N dimensions are applicable to Stainless Steel Shafts. L and d dimensions in ( ) are applicable.

Alterations

Hollow with Wrench Flats/Both Ends Tapped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSPJW6-[20-600/1]-M3-N3
PSPJW8-[20-800/1]-M[4,​5]-N[4,​5]
PSPJW10-[20-800/1]-M[5,​6]-N[5,​6]
PSPJW12-[32-1000/1]-M8-N8
PSPJW12-[32-1000/1]-M8-NT1
PSPJW12-[32-1000/1]-MT1-N8
PSPJW12-[32-1000/1]-MT1-NT1
PSPJW13-[40-1000/1]-M10-N10
PSPJW13-[40-1000/1]-M10-NT1
PSPJW13-[40-1000/1]-MT1-N10
PSPJW13-[40-1000/1]-MT1-NT1
PSPJW16-[30-1200/1]-M12-N12
PSPJW16-[30-1200/1]-M12-NT2
PSPJW16-[30-1200/1]-MT2-N12
PSPJW16-[30-1200/1]-MT2-NT2
PSPJW20-[30-1200/1]-M16-N16
PSPJW20-[30-1200/1]-M16-NT3
PSPJW20-[30-1200/1]-MT3-N16
PSPJW20-[30-1200/1]-MT3-NT3
PSPJW25-[35-1200/1]-M20-N20
PSPJW30-[80-1500/1]-M20-N20
PSPJW35-[96-1500/1]-M24-N24
PSPJW40-[96-1500/1]-M[24,​30]-N[24,​30]
PSPJW50-[120-1500/1]-M30-N30
PSPWR6-[20-600/1]-M3-N3-SC[6-586/1]
PSPWR8-[20-800/1]-M[4,​5]-N[4,​5]-SC[8-784/1]
PSPWR10-[20-800/1]-M[5,​6]-N[5,​6]-SC[10-782/1]
PSPWR12-[32-1000/1]-M8-N8-SC[16-972/1]
PSPWR12-[32-1000/1]-M8-NT1-SC[16-972/1]
PSPWR12-[32-1000/1]-MT1-N8-SC[16-972/1]
PSPWR12-[32-1000/1]-MT1-NT1-SC[16-972/1]
PSPWR13-[40-1000/1]-M10-N10-SC[20-970/1]
PSPWR13-[40-1000/1]-M10-NT1-SC[20-970/1]
PSPWR13-[40-1000/1]-MT1-N10-SC[20-970/1]
PSPWR13-[40-1000/1]-MT1-NT1-SC[20-970/1]
PSPWR16-[48-1200/1]-M12-N12-SC[24-1166/1]
PSPWR16-[48-1200/1]-M12-NT2-SC[24-1166/1]
PSPWR16-[48-1200/1]-MT2-N12-SC[24-1166/1]
PSPWR16-[48-1200/1]-MT2-NT2-SC[24-1166/1]
PSPWR20-[64-1200/1]-M16-N16-SC[32-1158/1]
PSPWR20-[64-1200/1]-M16-NT3-SC[32-1158/1]
PSPWR20-[64-1200/1]-MT3-N16-SC[32-1158/1]
PSPWR20-[64-1200/1]-MT3-NT3-SC[32-1158/1]
PSPWR25-[80-1200/1]-M20-N20-SC[40-1150/1]
PSPWR30-[80-1500/1]-M20-N20-SC[0-1485/1]
PSPWR35-[96-1500/1]-M24-N24-SC[0-1485/1]
PSPWR40-[96-1500/1]-M[24,​30]-N[24,​30]-SC[0-1480/1]
PSPWR50-[120-1500/1]-M30-N30-SC[0-1480/1]
RSPJW6-[20-500/1]-M3-N3
RSPJW8-[20-500/1]-M[4,​5]-N[4,​5]
RSPJW10-[20-500/1]-M[5,​6]-N[5,​6]
RSPJW12-[32-500/1]-M8-N8
RSPJW12-[32-500/1]-M8-NT1
RSPJW12-[32-500/1]-MT1-N8
RSPJW12-[32-500/1]-MT1-NT1
RSPJW13-[40-500/1]-M10-N10
RSPJW13-[40-500/1]-M10-NT1
RSPJW13-[40-500/1]-MT1-N10
RSPJW13-[40-500/1]-MT1-NT1
RSPJW16-[48-500/1]-M12-N12
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Hardness Add Wrench Flats at One Location [SC]
(mm)
Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8) Change Tapped Thread N to Tapered One [NT] 1(RC1/8) 2(RC1/4) 3(RC3/8) Tapped (Coarse) [M]
(mm)
Tapped (Coarse) [N]
(mm)

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)---33

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)---4 ~ 54 ~ 5

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)---5 ~ 65 ~ 6

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)---88

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)--18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)-1--8

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)-11--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)---1010

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)--110-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)-1--10

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)-11--

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)---1212

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)--212-

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)-2--12

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)-22--

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)---1616

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)--316-

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)-3--16

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)-33--

-

1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentHard Chrome Plating2535 ~ 1200Induction Hardened (58HRC~)---2020

-

1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3080 ~ 1500Induction Hardened (58HRC~)---2020

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3596 ~ 1500Induction Hardened (58HRC~)---2424

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating4096 ~ 1500Induction Hardened (58HRC~)---24 ~ 3024 ~ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating50120 ~ 1500Induction Hardened (58HRC~)---3030

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)6 ~ 586--33

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)8 ~ 784--4 ~ 54 ~ 5

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)10 ~ 782--5 ~ 65 ~ 6

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)16 ~ 972--88

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)16 ~ 972-18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)16 ~ 9721--8

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1232 ~ 1000Induction Hardened (58HRC~)16 ~ 97211--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)20 ~ 970--1010

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)20 ~ 970-110-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)20 ~ 9701--10

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1340 ~ 1000Induction Hardened (58HRC~)20 ~ 97011--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1648 ~ 1200Induction Hardened (58HRC~)24 ~ 1166--1212

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1648 ~ 1200Induction Hardened (58HRC~)24 ~ 1166-212-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1648 ~ 1200Induction Hardened (58HRC~)24 ~ 11662--12

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1648 ~ 1200Induction Hardened (58HRC~)24 ~ 116622--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2064 ~ 1200Induction Hardened (58HRC~)32 ~ 1158--1616

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2064 ~ 1200Induction Hardened (58HRC~)32 ~ 1158-316-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2064 ~ 1200Induction Hardened (58HRC~)32 ~ 11583--16

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2064 ~ 1200Induction Hardened (58HRC~)32 ~ 115833--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2580 ~ 1200Induction Hardened (58HRC~)40 ~ 1150--2020

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3080 ~ 1500Induction Hardened (58HRC~)0 ~ 1485--2020

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3596 ~ 1500Induction Hardened (58HRC~)0 ~ 1485--2424

-

1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating4096 ~ 1500Induction Hardened (58HRC~)0 ~ 1480--24 ~ 3024 ~ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating50120 ~ 1500Induction Hardened (58HRC~)0 ~ 1480--3030

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating620 ~ 500Induction Hardened (58HRC~)---33

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating820 ~ 500Induction Hardened (58HRC~)---4 ~ 54 ~ 5

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1020 ~ 500Induction Hardened (58HRC~)---5 ~ 65 ~ 6

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1232 ~ 500Induction Hardened (58HRC~)---88

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1232 ~ 500Induction Hardened (58HRC~)--18-

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1232 ~ 500Induction Hardened (58HRC~)-1--8

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1232 ~ 500Induction Hardened (58HRC~)-11--

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1340 ~ 500Induction Hardened (58HRC~)---1010

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1340 ~ 500Induction Hardened (58HRC~)--110-

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1340 ~ 500Induction Hardened (58HRC~)-1--10

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1340 ~ 500Induction Hardened (58HRC~)-11--

-

1 Piece(s) 11 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1648 ~ 500Induction Hardened (58HRC~)---1212

Loading...

Example

Hollow with Wrench Flats/Both Ends Tapped:Related Image
 

Basic Information

Basic Shape Hollow End Shape (Left) Tapped End Shape (Right) Tapped
Heat Treatment Induction Hardened Shaft Fit Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)