(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Linear Shafts - Set Screw Grooved

Linear Shafts - Set Screw Grooved

[Features] Linear shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with grooves for set screws.

Ends Grooved/Threaded/Tapped/Stepped:Related Image
[ ! ]Annealing could reduce hardness at set screw grooved shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Circularity, Straightness, Perpendicularity, Concentricity, Changes in Hardness >> P.111
[ ! ]Features of Low Temp. Black Chrome Plating >> P.128

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
Solid, Both Ends GroovedSolid, One End GroovedOne End TappedOne End ThreadedOne End Threaded with O.D. same as Shaft O.D.
SFJQSFJSSFTSSFNSSFQSSUJ2 EquivalentEffective Hardened Depth of Induction Hardened >>P.112
SUJ2 Equivalent
58HRC~
SUS440C or 13Cr stainless
56HRC~
-
SSFJQSSFJSSSFTSSSFNSSSFQSSUS440C or 13Cr stainless
PSFJQPSFJSPSFTSPSFNSPSFQSSUJ2 EquivalentHard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
PSSFJQPSSFJSPSSFTSPSSFNSPSSFQSSUS440C or 13Cr stainless

Specifications

Part Number-L-M-F-B-P-V-K-G-Q
SFJQ16-100        -V10-K5-G10-Q5
SSFTS20-500-M10          -G10-Q7
PSFNS8-650  -F10-B8-P4    -G20-Q4
Part NumberL
1mm Increment
Slot DimensionD Tol.C
TypeDV, G (0.1mm Increment)K, QD1g6
Solid, Both Ends Grooved
SFJQ
SSFJQ
PSFJQ
PSSFJQ
620~6005~184   5-0.004
-0.012
0.5 or Less
820~8005~2445  7-0.005
-0.014
0.5 or Less
1020~8005~3045  9-0.005
-0.014
0.5 or Less
1220~10005~36 5  10-0.006
-0.017
0.5 or Less
1325~10005~39 5  11-0.006
-0.017
0.5 or Less
1525~10005~45 56 13-0.006
-0.017
0.5 or Less
1630~12005~48 56 14-0.006
-0.017
0.5 or Less
1830~12005~54 56 16-0.006
-0.017
0.5 or Less
2030~12006~60  6718-0.007
-0.020
1.0 or Less
2535~12006~75  6723-0.007
-0.020
1.0 or Less
3035~15006~90   728-0.007
-0.020
1.0 or Less

Part NumberL
1mm Increment
Slot DimensionD Tol.C
TypeDG (0.1mm Increment)QD1g6
Solid, One End Grooved
SFJS
SSFJS
PSFJS
PSSFJS
620~6005~184   5-0.004
-0.012
0.5 or Less
820~8005~2445  7-0.005
-0.014
0.5 or Less
1020~8005~3045  9-0.005
-0.014
0.5 or Less
1220~10005~36 5  10-0.006
-0.017
0.5 or Less
1325~10005~39 5  11-0.006
-0.017
0.5 or Less
1525~10005~45 56 13-0.006
-0.017
0.5 or Less
1630~12005~48 56 14-0.006
-0.017
0.5 or Less
1830~12005~54 56 16-0.006
-0.017
0.5 or Less
2030~12006~60  6718-0.007
-0.020
1.0 or Less
2535~12006~75  6723-0.007
-0.020
1.0 or Less
3035~15006~90   728-0.007
-0.020
1.0 or Less

Part NumberL
1mm Increment
One End TappedSlot DimensionD Tol.C
TypeDM (Coarse Thread)G (0.1mm Increment)QD1g6
One End Tapped Type
SFTS
SSFTS
PSFTS
PSSFTS
620~6003         5~184   5-0.004
-0.012
0.5 or Less
820~800345       5~2445  7-0.005
-0.014
0.5 or Less
1020~8003456      5~3045  9-0.005
-0.014
0.5 or Less
1220~1000 4568     5~36 5  10-0.006
-0.017
0.5 or Less
1325~1000 4568     5~39 5  11-0.006
-0.017
0.5 or Less
1525~1000 456810    5~45 56 13-0.006
-0.017
0.5 or Less
1630~1200 456810    5~48 56 14-0.006
-0.017
0.5 or Less
1830~1200 45681012   5~54 56 16-0.006
-0.017
0.5 or Less
2030~1200 45681012   6~60  6718-0.007
-0.020
1.0 or Less
2535~1200 4568101216  6~75  6723-0.007
-0.020
1.0 or Less
3035~1500   6810121620246~90   728-0.007
-0.020
1.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required. [ ! ]For One End Tapped Type, G≤L-Mx2-Qx2 is required.
[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Part Number1mm IncrementSelectionSlot DimensionD Tol.(Y)Max.RC
TypeDLFBPG (1mm Increment)Q (Selection)D1g6
Threaded Type
SFNS
SSFNS
PSFNS
PSSFNS
625~5982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(When P≥12)
B≤F-5

[ ! ]B≥Pitchx3
3456       5~184   5-0.004
-0.012
6000.3 or Less0.5 or Less
825~79834568      5~2445  7-0.005
-0.014
8000.3 or Less0.5 or Less
1025~798 456810     5~3045  9-0.005
-0.014
8000.3 or Less0.5 or Less
1225~998  5681012    5~36 5  11-0.006
-0.017
10000.3 or Less0.5 or Less
1325~998  5681012    5~39 5  11-0.006
-0.017
10000.3 or Less0.5 or Less
1525~998  5681012    5~45 56 13-0.006
-0.017
10000.3 or Less0.5 or Less
1625~1198  568101216   5~48 56 14-0.006
-0.017
12000.3 or Less0.5 or Less
1825~1198  568101216   5~54 56 16-0.006
-0.017
12000.3 or Less0.5 or Less
2025~1198   6810121620  6~60  6718-0.007
-0.020
12000.3 or Less1.0 or Less
2525~1198    81012162024 6~75  6723-0.007
-0.020
12000.3 or Less1.0 or Less
3025~1498    81012162024306~90   728-0.007
-0.020
15000.3 or Less1.0 or Less

Part Number1mm IncrementSlot DimensionD Tol.(Y)Max.C
TypeDLBG (1mm Increment)Q (Selection)D1g6
One End Threaded with O.D. same as Shaft O.D.
SFQS
SSFQS
PSFQS
PSSFQS
625~598Pitchx3≤B≤Mx5


[ ! ]For One End Threaded with O.D. same as Shaft O.D., L dimensions have priority, thus the effective thread length will be B-(Pitchx2).
5~184   5-0.004
-0.012
6000.5 or Less
825~7985~2445  7-0.005
-0.014
8000.5 or Less
1025~7985~3045  9-0.005
-0.014
8000.5 or Less
1225~9985~36 5  11-0.006
-0.017
10000.5 or Less
1625~11985~48 56 14-0.006
-0.017
12000.5 or Less
2025~11986~60  6718-0.007
-0.020
12001.0 or Less
3025~14986~90   728-0.007
-0.020
15001.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required.

Coarse Thread Dimension
MPitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Alterations

Ends Grooved/Threaded/Tapped/Stepped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
PSFJQ8-[20-800/1]-V[5-24/1]-K[4,​5]-G[5-24/1]-Q[4,​5]
PSFJQ10-[20-800/1]-V[5-30/1]-K[4,​5]-G[5-30/1]-Q[4,​5]
PSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
PSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
PSFJQ15-[25-1000/1]-V[5-45/1]-K[5,​6]-G[5-45/1]-Q[5,​6]
PSFJQ16-[30-1200/1]-V[5-48/1]-K[5,​6]-G[5-48/1]-Q[5,​6]
PSFJQ18-[30-1200/1]-V[5-54/1]-K[5,​6]-G[5-54/1]-Q[5,​6]
PSFJQ20-[30-1200/1]-V[6-60/1]-K[6,​7]-G[6-60/1]-Q[6,​7]
PSFJQ25-[30-1200/1]-V[6-75/1]-K[6,​7]-G[6-75/1]-Q[6,​7]
PSFJQ30-[35-1500/1]-V[6-90/1]-K7-G[6-90/1]-Q7
PSFJS6-[20-600/1]-G[5-18/1]-Q4
PSFJS8-[20-800/1]-G[5-24/1]-Q[4,​5]
PSFJS10-[20-800/1]-G[5-30/1]-Q[4,​5]
PSFJS12-[20-1000/1]-G[5-36/1]-Q5
PSFJS13-[25-1000/1]-G[5-39/1]-Q5
PSFJS15-[25-1000/1]-G[5-45/1]-Q[5,​6]
PSFJS16-[30-1200/1]-G[5-48/1]-Q[5,​6]
PSFJS18-[30-1200/1]-G[5-54/1]-Q[5,​6]
PSFJS20-[30-1200/1]-G[6-60/1]-Q[6,​7]
PSFJS25-[30-1200/1]-G[6-75/1]-Q[6,​7]
PSFJS30-[35-1500/1]-G[6-90/1]-Q7
PSFNS6-[20-600/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6]-G[5-18/1]-Q4
PSFNS8-[20-800/1]-F[2-40/1]-B[2-37/1]-P[3,​4,​5,​6,​8]-G[5-24/1]-Q[4,​5]
PSFNS10-[20-800/1]-F[2-50/1]-B[2-47/1]-P[4,​5,​6,​8,​10]-G[5-30/1]-Q[4,​5]
PSFNS12-[20-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-36/1]-Q5
PSFNS13-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-39/1]-Q5
PSFNS15-[25-998/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-45/1]-Q[5,​6]
PSFNS16-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-48/1]-Q[5,​6]
PSFNS18-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-54/1]-Q[5,​6]
PSFNS20-[30-1200/1]-F[2-100/1]-B[2-95/1]-P[6,​8,​10,​12,​16,​20]-G[6-60/1]-Q[6,​7]
PSFNS25-[30-1200/1]-F[2-120/1]-B[2-115/1]-P[8,​10,​12,​16,​20,​24]-G[6-75/1]-Q[6,​7]
PSFNS30-[35-1500/1]-F[2-150/1]-B[2-145/1]-P[8,​10,​12,​16,​20,​24,​30]-G[6-90/1]-Q7
PSFQS6-[20-600/1]-B[2-28/1]-G[5-18/1]-Q4
PSFQS8-[20-800/1]-B[2-37/1]-G[5-24/1]-Q[4,​5]
PSFQS10-[20-800/1]-B[2-47/1]-G[5-30/1]-Q[4,​5]
PSFQS12-[20-1000/1]-B[2-55/1]-G[5-36/1]-Q5
PSFQS16-[30-1200/1]-B[2-75/1]-G[5-48/1]-Q[5,​6]
PSFQS20-[30-1200/1]-B[2-95/1]-G[6-60/1]-Q[6,​7]
PSFQS30-[35-1500/1]-B[2-145/1]-G[6-90/1]-Q7
PSFTS6-[20-600/1]-M3-G[5-18/1]-Q4
PSFTS8-[20-800/1]-M[3,​4,​5]-G[5-24/1]-Q[4,​5]
PSFTS10-[20-800/1]-M[3,​4,​5,​6]-G[5-30/1]-Q[4,​5]
PSFTS12-[20-1000/1]-M[4,​5,​6,​8]-G[5-36/1]-Q5
PSFTS13-[25-1000/1]-M[4,​5,​6,​8]-G[5-39/1]-Q5
PSFTS15-[25-1000/1]-M[4,​5,​6,​8,​10]-G[5-45/1]-Q[5,​6]
PSFTS16-[30-1200/1]-M[4,​5,​6,​8,​10]-G[5-48/1]-Q[5,​6]
PSFTS18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[5-54/1]-Q[5,​6]
PSFTS20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[6-60/1]-Q[6,​7]
PSFTS25-[30-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-G[6-75/1]-Q[6,​7]
PSFTS30-[35-1500/1]-M[6,​8,​10,​12,​16,​20,​24]-G[6-90/1]-Q7
PSSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
PSSFJQ8-[20-800/1]-V[5-24/1]-K[4,​5]-G[5-24/1]-Q[4,​5]
PSSFJQ10-[20-800/1]-V[5-30/1]-K[4,​5]-G[5-30/1]-Q[4,​5]
PSSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
PSSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
PSSFJQ15-[25-1000/1]-V[5-45/1]-K[5,​6]-G[5-45/1]-Q[5,​6]
PSSFJQ16-[30-1200/1]-V[5-48/1]-K[5,​6]-G[5-48/1]-Q[5,​6]
PSSFJQ18-[30-1200/1]-V[5-54/1]-K[5,​6]-G[5-54/1]-Q[5,​6]
PSSFJQ20-[30-1200/1]-V[6-60/1]-K[6,​7]-G[6-60/1]-Q[6,​7]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSEnd Shape (Left) Material Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Hardness Shaft End Type B
(mm)
F
(mm)
G
(mm)
K
(mm)
Q
(mm)
Tapped (Coarse) [M]
(mm)
Threaded (Coarse) [P]
(mm)
V
(mm)

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 1844--5 ~ 18

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 244 ~ 54 ~ 5--5 ~ 24

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 304 ~ 54 ~ 5--5 ~ 30

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 3655--5 ~ 36

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 3955--5 ~ 39

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 455 ~ 65 ~ 6--5 ~ 45

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 485 ~ 65 ~ 6--5 ~ 48

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 545 ~ 65 ~ 6--5 ~ 54

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--6 ~ 606 ~ 76 ~ 7--6 ~ 60

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--6 ~ 756 ~ 76 ~ 7--6 ~ 75

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)Solid, Both Ends Grooved--6 ~ 9077--6 ~ 90

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 18-4---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 24-4 ~ 5---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 30-4 ~ 5---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 36-5---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 39-5---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 45-5 ~ 6---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 48-5 ~ 6---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 54-5 ~ 6---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--6 ~ 60-6 ~ 7---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--6 ~ 75-6 ~ 7---

-

1 Piece(s) 6 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)Solid, One End Grooved--6 ~ 90-7---

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)One End Threaded2 ~ 282 ~ 305 ~ 18-4-3 ~ 6-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)One End Threaded2 ~ 372 ~ 405 ~ 24-4 ~ 5-3 ~ 8-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)One End Threaded2 ~ 472 ~ 505 ~ 30-4 ~ 5-4 ~ 10-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)One End Threaded2 ~ 552 ~ 605 ~ 36-5-5 ~ 12-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)One End Threaded2 ~ 552 ~ 605 ~ 39-5-5 ~ 12-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 998Induction Hardened (58HRC~)One End Threaded2 ~ 552 ~ 605 ~ 45-5 ~ 6-5 ~ 12-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 752 ~ 805 ~ 48-5 ~ 6-5 ~ 16-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 752 ~ 805 ~ 54-5 ~ 6-5 ~ 16-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 952 ~ 1006 ~ 60-6 ~ 7-6 ~ 20-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 1152 ~ 1206 ~ 75-6 ~ 7-8 ~ 24-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Threaded2 ~ 1452 ~ 1506 ~ 90-7-8 ~ 30-

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.--5 ~ 18-4---

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.--5 ~ 24-4 ~ 5---

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.--5 ~ 30-4 ~ 5---

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.--5 ~ 36-5---

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.--5 ~ 48-5 ~ 6---

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.--6 ~ 60-6 ~ 7---

-

1 Piece(s) 6 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.--6 ~ 90-7---

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)One End Tapped--5 ~ 18-43--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)One End Tapped--5 ~ 24-4 ~ 53 ~ 5--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)One End Tapped--5 ~ 30-4 ~ 53 ~ 6--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)One End Tapped--5 ~ 36-54 ~ 8--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)One End Tapped--5 ~ 39-54 ~ 8--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)One End Tapped--5 ~ 45-5 ~ 64 ~ 10--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Tapped--5 ~ 48-5 ~ 64 ~ 10--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)One End Tapped--5 ~ 54-5 ~ 64 ~ 12--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Tapped--6 ~ 60-6 ~ 74 ~ 12--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)One End Tapped--6 ~ 75-6 ~ 74 ~ 16--

-

1 Piece(s) 6 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Tapped--6 ~ 90-76 ~ 24--

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating620 ~ 600Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 1844--5 ~ 18

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating820 ~ 800Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 244 ~ 54 ~ 5--5 ~ 24

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1020 ~ 800Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 304 ~ 54 ~ 5--5 ~ 30

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1220 ~ 1000Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 3655--5 ~ 36

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1325 ~ 1000Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 3955--5 ~ 39

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1525 ~ 1000Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 455 ~ 65 ~ 6--5 ~ 45

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1630 ~ 1200Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 485 ~ 65 ~ 6--5 ~ 48

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1830 ~ 1200Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 545 ~ 65 ~ 6--5 ~ 54

-

1 Piece(s) 6 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating2030 ~ 1200Induction Hardened (56HRC~)Solid, Both Ends Grooved--6 ~ 606 ~ 76 ~ 7--6 ~ 60

Loading...

 

Basic Information

Basic Shape Solid End Shape (Right) Set Screw Grooved Shaft End Perpendicularity Perpendicularity (0.2)
Heat Treatment Induction Hardened Shaft Fit Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)