(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Heat Radiation Gel Sheets

Heat Radiation Gel Sheets

Click this image to zoom it.

Move the mouse over the image to zoom

[Features]·It can be used between the heat source and the heat sink or housing.



Type[ M ]Material[ H ]Hardness
Penetration
HTCH(High Thermal Conduction)Silicone50

Specifications

Part Number-A-B
HTCH0.5-300-190
Part Number1mm Increment
TypeTAB
HTCH0.5
1
2
10~35010~350
[ ! ]A≥B
ItemUnitHTCH
Thermal Conductivity (Hot Wire Method)W/m-K2.1
Appearance-Gray
Specific Gravity-2.8
HardnessPenetration: 1/10mm50
Volume ResistivityΩ cm5.7x1012
Tensile StrengthMpa0.12
Elongation%220
Compression Set%92
Dielectric Breakdown StrengthkV/mm7.2
Content of Low-Molecule Siloxane∑D4~D10ppm300 or Less
Flame Resistance-V-0
Normal Temperature Range°C-40~200
Magnetic Permeability (Magnetic Loss)<1GHz>-

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
HTCH0.5-[10-350/1]-[10-350/1]
HTCH1-[10-350/1]-[10-350/1]
HTCH2-[10-350/1]-[10-350/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSThickness T Length A
(mm)
Width B
(mm)

-

1 Piece(s) 8 Day(s) or more 100.510 ~ 35010 ~ 350

-

1 Piece(s) 8 Day(s) or more 10110 ~ 35010 ~ 350

-

1 Piece(s) 8 Day(s) or more 10210 ~ 35010 ~ 350

Loading...

  1. 1

More Information

■How to Use
(1) Peel off single side of backing paper slowly.
(2) Paste it on the heat-generating part carefully so that air bubbles don't get trapped in. Then peel off the rest of the backing paper.
(3) Paste it carefully so that air bubbles don't get in between the heat radiation gel and heat-generating part.
■Features
-With excellent flexibility and adhesiveness, it can closely adhere to concave or convex surface without trapping air.
-Excels in electric insulation and flame resistance.
-With low temperature dependency, it is suitable for use in wide temperature range −40°C~200°C (−40°C~150°C for HTRE).

Example

 

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)